Optional Extended Peg Mount Clevis Set: Part No. 497066 NOTE: Kuryakyn Highway Pegs offer a wide range of adjustment. It is the responsibility of the installer or the end user to ensure they do not interfere with the operation or cornering clearance of the motorcycle Included Items: (1) Left upper mount (1) Right upper mount (2) Lower mounts (2) Swing arms (2) Clevis mounts (2) 3/8-16x1 in. SHCS fasteners (2) D-Spring washers (2) Dually ISO pegs (2) Adjustable stops (2) 1/2-13x1-1/4 in. BSCS fasteners (2) .50 IDx.90 OD Flat washers (2) .50 IDx.90 OD Wave washers (8) 1/4-20x3/4 in. SHCS fasteners (4) 3/8-16x5/8 in. Cup point fasteners (4) 1/8x5/16 Roll pins (2) 1/2 in. Lock washers (1) Anti-seize packet (2) Rubber thread plugs (1) Instructions ATTENTION: It is the installers responsibility to ensure that all of the fasteners (including pre-assembled) are tightened before operation of the motorcycle. Kuryakyn will not warranty components lost due to improper installation. Periodic maintenance may be required. |
Mfg #: | 4056 |
---|---|
Mount Type | Clamp-on |
Part #: | 492138 |
Type | Footpeg - Driver |
Units | Pair |
Weight | 9.56 lbs |
Part 492138 fits the following machines