Need Assistance?
Legendary Service... Ask Your Friends - Since 1969
800.969.7501
Over 160K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Kuryakyn Engine Guard Mounted Driving Lights - 5019

  • Part #:
    215964
  • Manufacturer Part #:
    5019

MSRP Price: $229.99

Our Price: $206.99

You Save:
$23.00 (10%)
2 on Hand

Overview of Kuryakyn Engine Guard Mounted Driving Lights - 5019

  • DOT approved driving lights
  • 3 in. diameter
  • Sleek chrome housing
  • Install with 1 1/4 in. diameter clamps to engine guards
  • Use Kuryakyn wiring/relay switch kit (PART NO. 21-1224 or 21-5922 on/off switch assembly)
  • Sold in pairs


Included Items:
(2) Driving lights w/pivot mount
(2) Clamp caps (installed on clamp)
(2) 3/8-16 Nylock he nuts
(4) #10-24 x 1/2" Sockethead cap screws
(6) Female T-Tap connectors
(6) Male spade connectors
(4) Female bullet connectors
(4) Male bullet connectors
(1) Pin terminal
(1) Contact receptacle
(10) 6" Cable ties
(2) Packets dielectric grease
(1) Instructions

Specs for Kuryakyn Engine Guard Mounted Driving Lights - 5019

Finish Chrome
Type Driving Light
Units Pair
Weight 3.00 lbs

Specs for Kuryakyn Engine Guard Mounted Driving Lights - 5019

Finish Chrome
Type Driving Light
Units Pair
Weight 3.00 lbs

Fitment for Kuryakyn Engine Guard Mounted Driving Lights - 5019

See if this part fits your ride

Part 215964 fits the following machines

4.8 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
4
1
0
0
0
Finish
5.0 / 5
Fit
4.8 / 5
Quality
4.8 / 5
Style
4.8 / 5
Value
4.8 / 5
Would you recommend this product?
Yes (1)
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Good extra lighting
I bought the wiring kit with pushbutton handlebar switch for my Star 1300. Routed and snaked the power wires under the tank and installed the relay under the seat, next to the battery. Wired the relay trigger wire to the headlamp power wire, so the auxiliary lights would come on after the bike starts. I run them day and night and have them adjusted to spread the low beam angle further so the immediate road ahead is better illuminated at night. For day time running, I always run with the high beams on with the auxiliaries. No one can say they DON'T see me coming! The lights ground to the crash bars. Installation took me around two hours, since I am old and slow. Of course all connections and splices are soldered and covered with heat shrink. These lights exceeded my expectations and are highly recommended.
January 24, 2014
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
great lights, when modified
had to modify the lights to mount where I wanted on my sportster engine guard. I needed to mount the lights on the upright of the guard rather than the top or bottom of the top tube (my engine guard isn't as wide as a dresser) The halogen element need to be rotated 90 degrees to allow the light beam to be horizontal rather than vertical. In order for the element to fit in the housing approx. 1/8" of the head of the mounting bolt had to be ground off to allow the element to fit properly in the housing. No changes are needed to the index mark. Also as my engine guard is powder coated rather than chrome plan on grounding the lights with the ground wire the switch kit provides rather than a chassis ground.
July 9, 2012
Fit
4 / 5
Quality
4 / 5
Style
4 / 5
Value
4 / 5
Nice lights with installation limitations
These are nice lights, but the instructions are misleading. It states these can be mounted anyway you want. That is correct, but the bulbs can't be rotated. I mounted these on the vertical portion of my engine guards and the light beam was vertical. I was able to change the bolts to a carriage bolts and get enough clearance to rotate the bulb.
May 17, 2013
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Very Pleased with Product
Very pleased with these Kuryakyn lights, they looked like they were styled to go with my Yamaha Roadliner. They provide good additional light at night or early morning and make my ride more visible to four wheeled traffic.
June 19, 2017
Purchased
2 months ago
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
No Review Title Entered By User
Looks and works great
April 6, 2012
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Are these lights easy to mount? Will they fit on my 2003 deuce?
Christopher M on Oct 2, 2016
BEST ANSWER: These lights are easy to mount, but I don't know if they will fit on a 2003 deuce they do require an inch and a quarter bar for mounting

Instructions and Manuals for Kuryakyn Engine Guard Mounted Driving Lights - 5019

You May Also Be Interested In