Dennis Kirk Inc.
Search Within
Ride Search
Top 3 Product Matches

Relocator Bracket for Driver Floorboards - 4588

1 / 1

Relocator Bracket for Driver Floorboards - 4588

MSRP: $99.99

Price: $89.99 10% off!
Make sure this fits your ride
Ships Free
In Stock - 10+ on Hand

Kuryakyn Relocator Bracket for Driver Floorboards - 4588
  • Repositions driver boards out one inch and forward one inch from stock location
  • Makes a noticeable difference in comfort, thighs are not as tight against the tank, right knee is not as tight against the air cleaner, and legs get to stretch out a little bit more
  • Compatible with Kuryakyn ISO-Boards as well as Harley Davidson Traditional or Swept Wing shaped boards
  • Not compatible with Cruise Arm Mark III part numbers H490967, H490968, or standard length version of Cruise Arm Mark IV part number 493522


Included Items:
(1) Left front bracket
(1) Right front bracket
(1) Left rear bracket
(1) Right rear bracket
(4) 1/4-20 Nylon locking nuts
(4) 1/4-20 x 1-1/2 in. Shoulder bolts
(8) 1/4-20 Flat washers
(2) #10-32 x 3/8 in. Set screws
(1) Installation Instructions

Specifications
Part #: 495224
Mfg #: 4588
Color Chrome
Type Footpeg Bracket
Units Set
Weight 1.40 lbs
Alternate/OEM Part Number(s):
16210170
UPC Code:
191209009588
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Resources & Manuals
Fitment for Kuryakyn Relocator Bracket for Driver Floorboards - 4588

Part 495224 fits the following machines

Harley-Davidson
  • Electra Glide Classic - FLHTC 1997-2005, 2009-2013
  • Electra Glide Classic (EFI) - FLHTC 2007-2008
  • Electra Glide Classic Injected - FLHTC I 1997-2006
  • Electra Glide Injected CVO/SE - FLHTCSE 2004
  • Electra Glide Injected CVO/SE - FLHTCSE 2 2005
  • Electra Glide Police - FLHTP 2014-2018
  • Electra Glide Standard - FLHT 1997-2006, 2009
  • Electra Glide Standard (EFI) - FLHT 2007-2008
  • Electra Glide Standard Injected - FLHT I 2003-2006
  • Electra Glide Ultra Classic - FLHTCU 1997-1999, 2009-2018
  • Electra Glide Ultra Classic (EFI) - FLHTCU 2007-2008
  • Electra Glide Ultra Classic CVO/SE - FLHTCUSE 4 2009
  • Electra Glide Ultra Classic CVO/SE - FLHTCUSE 5 2010
  • Electra Glide Ultra Classic CVO/SE - FLHTCUSE 6 2011
  • Electra Glide Ultra Classic CVO/SE - FLHTCUSE 7 2012
  • Electra Glide Ultra Classic CVO/SE - FLHTCUSE 8 2013
  • Electra Glide Ultra Classic CVO/SE (EFI) - FLHTCUSE 2 2007
  • Electra Glide Ultra Classic CVO/SE (EFI) - FLHTCUSE 3 2008
  • Electra Glide Ultra Classic Injected - FLHTCU I 1997-2006
  • Electra Glide Ultra Classic Low - FLHTCUL 2015-2016
  • Electra Glide Ultra Limited - FLHTK 2010-2016
  • Electra Glide Ultra Limited CVO/SE - FLHTKSE 2014-2016
  • Electra Glide Ultra Limited Low - FLHTKL 2015-2016
  • Freewheeler - FLRT 2015-2016
  • Road Glide - FLTR 1998-2002, 2009
  • Road Glide - FLTRX 2015-2016
  • Road Glide (EFI) - FLTR 2007-2008
  • Road Glide Custom - FLTRX 2010-2013
  • Road Glide Custom CVO/SE - FLTRXSE 2012
  • Road Glide Custom CVO/SE - FLTRXSE 2 2013
  • Road Glide CVO/SE - FLTRSE 3 2009
  • Road Glide Injected - FLTR I 1998-2006
  • Road Glide Injected CVO/SE - FLTRSE I 2000
  • Road Glide Injected CVO/SE - FLTRSE I 2 2001
  • Road Glide Special - FLTRXS 2015-2016
  • Road King - FLHR 1997-2006, 2009-2016
  • Road King (EFI) - FLHR 2007-2008
  • Road King Classic - FLHRC 2009-2013
  • Road King Classic (EFI) - FLHRC 2007-2008
  • Road King Classic Injected - FLHRC I 1998-2006
  • Road King Custom - FLHRS 2004-2006
  • Road King Custom (EFI) - FLHRS 2007
  • Road King Custom Injected - FLHRS I 2004-2006
  • Road King CVO/SE - FLHRSE 2014
  • Road King CVO/SE - FLHRSE 5 2013
  • Road King CVO/SE (EFI) - FLHRSE 3 2007
  • Road King CVO/SE (EFI) - FLHRSE 4 2008
  • Road King Injected - FLHR I 1997-2006
  • Road King Injected CVO/SE - FLHRSE I 2002
  • Road King Injected CVO/SE - FLHRSE I 2 2003
  • Street Glide - FLHX 2006, 2009-2016
  • Street Glide (EFI) - FLHX 2007-2008
  • Street Glide CVO/SE - FLHXSE 2010, 2015-2016
  • Street Glide CVO/SE - FLHXSE 2 2011
  • Street Glide CVO/SE - FLHXSE 3 2012
  • Street Glide Injected - FLHX I 2006
  • Street Glide Special - FLHXS 2014-2016
  • Tri Glide Ultra Classic - FLHTCUTG 2009-2013
Reviews & Questions
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 27 answers
How does moving the floor boards out and forward effect the stock brake and shift controls or access? Thanks! Jeff
The Boot on Jan 19, 2017
BEST ANSWER: Depends on your shifter and brake pedal position. If your current position of your floor board is centered at like the brake pedal for example, these will move the floor boards one inch forward and one inch out. Usually that doesn't do much for the use of either the shifter or brake pedal. But that all depends on the brake pedal, if you have adjusted them, what size they are, and personal preference, shoe size, riding style, maybe even a heel shifter.
After all, one inch is not much (in this case that is true! ;-) )
Not sure about your riding style, some bikes loose a little bit of lean angle. If you have scraped floorboards before, after installing these it will happen earlier. Keep that in mind.
I have a 2012 Ultra Limited. Will I have to modify the lower farings to install these?
A shopper on Apr 18, 2017
BEST ANSWER: You should not have to I have a 2016 ultra limited and they bolted right on a fit correctly
Is there any mounts that just move foot position forward and go to a foot peg (no floorboard) with a single shifter on an 07 road king? Want to stretch out without be on highway pegs
Jason J on Aug 4, 2017
BEST ANSWER: Yes, forward controls you can get from Harley Davidson the kit is about $900. I ended up doing that for my bike, I was always on the highway pegs legs to long for floorboards.
The description reads that these are brown is that accurate or are they chrome and does the set screw dig in and break the paint on the bracket?
A shopper on Jun 16, 2020
BEST ANSWER: These are chrome, typo on the brown
can you use the floorboard highway peg mounts with this ?
A shopper on Jan 15, 2020
BEST ANSWER: Not compatible with Cruise Arm Mark III part numbers H490967, H490968, or standard length version of Cruise Arm Mark IV part number 493522
4.4 / 5.0
42 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
25
12
3
0
2
Finish
4.6 / 5
Fit
4.3 / 5
Quality
4.5 / 5
Style
4.6 / 5
Value
4.4 / 5
Would you recommend this product?
Yes (15)
No (1)
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Floorboard Relocation Kit
I have installed this kit on several bikes over the past few years. The kit is easy to install. The fit and finish is good. They are very durable. I stand on my floorboard to mount the bike with no problems and I'm 260 lbs. My buddy is 300 lbs. The 1" out and 1" forward makes quite a difference.
November 23, 2016
Lockport, IL
Purchased
over 3 years ago
Fit
4 / 5
Quality
5 / 5
Style
4 / 5
Value
5 / 5
Nice looking but...
Excellent quality and simple install however the fit guidelines are inaccurate. These will NOT fit FLH series bikes equipped with factory lowers. You could of course remove the lowers...
July 13, 2012
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
best money spent on this bike yet
MOving the floorboards out seems to help reduce the buffeting I was getting on my electra glide, the added room forward is a much more comfortable riding position too. The whole install took under an hour including the installation of an extended shift lever.
July 30, 2010
Fit
3 / 5
Quality
4 / 5
Style
5 / 5
Value
4 / 5
No Review Title Entered By User
The dirrections were good other than i had to grind about an 1/8 inch off the floor board tpo make the rear bolt holes align on both sides. riding made a huge difference for the better since i'm 6 foot 6 inches tall.
June 3, 2015
Rapid City, SD
Fit
4 / 5
Quality
4 / 5
Style
4 / 5
Value
4 / 5
Floor board relocators
These do what they say...one inch out and forward. Not difficult to install at all. You have to make sure you use the additional washers on the narrow front bracket and the new bolts and nuts provided are of course metric (you reuse the old bolts too) so you need two wrenches one SAE and one metric. The only real pain is that the front bracket is a bit tricky because you can't turn the nut easily and have limited space to turn the hex wrench.

Otherwise good product.

I installed the right side in 30 minutes with the bike on the ground
July 8, 2012
Phoenix, AZ
Fit
4 / 5
Quality
4 / 5
Style
4 / 5
Value
4 / 5
Did what they were supposed to do.
Easy to install and one inch out and one inch forward makes more of a difference than you might think
May 30, 2011
Fit
2 / 5
Quality
4 / 5
Style
4 / 5
Value
4 / 5
No Review Title Entered By User
I have an 04 RoadGlide and to make these brackets work I'm going to have to add multiple washers as they areway too narrow for my stock floorboards. They should include spacers or washers in the kit which they don't. One size does not fit all.
July 15, 2012
Great idea, poor fitment
Product looks nice and quality made, and beefy but poor fitment between the brackets and the oem Harley footboard a- I had to use additional washers(more than provided) to shim the fitment so boards weren't loose and floppy after installation to running board extensions.
August 7, 2015
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Relocator brackets are great!!
I just add these relocator brackets to my 2002 Roadking and love them. I have long legs, and now I have a lot more room. It move me off the tank and forward enough to really improve the ride. It took me about hour to put them on.
March 13, 2012
Purchased
over 8 years ago
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Great product
Easy to install and put the running boards exactly where I wanted them to be
August 18, 2016
Purchased
over 3 years ago