Dennis Kirk Inc.
Search Within
Ride Search
Top 3 Product Matches

Bluegrass Breather Kit - 9930

1 / 2

Bluegrass Breather Kit - 9930

MSRP: $59.99

Price: $53.99 10% off!
Make sure this fits your ride
In Stock - 3 on Hand

Kuryakyn Bluegrass Breather Kit - 9930
  • Simple, effective way to keep the oil in the bike
  • Engines that vent crankcase through the cylinder heads also expel oil through the same passages; venting directly into the air cleaner can result in an oily mess on the side of the bike
  • The banjo fittings and chrome tubes route the vented gasses upward so gravity can keep any expelled oil droplets in the engine where they belong
  • Can vent the crankcase to open air by running the vent line up and out of sight beneath the tank, but an optional catch tank p/n 18-2806 is available for those who would rather vent to a closed container
  • For use with aftermarket air cleaner assembly
  • Assembled height of breather bolt and fitting is 5/8 in. and hose size is 34 in. x 5/16 in. ID

NOTE: For models listed with Mikuni HSR series carb

Included Items:
(2) Assembly-Banjo Elbow Long
(1) 34 in. Long x 5/16 in. ID Hose
(6) Aluminum Washers
(4) 1/2 in. Hose Clamps
(1) Y-Line Fitting
(2) 1/2-13 x 1.325 Evo Breather Bolt
(2) 3/8-16 x 1.325 TC Breather Bolt
(1) Installation Instructions
Specifications
Part #: 182805
Mfg #: 9930
Type Crancase Breather Kit
Type Engine Breather Kit
Units Each
Units Kit
Weight 1.37 lbs
Alternate/OEM Part Number(s):
10120216
UPC Code:
191209008093
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Resources & Manuals
Fitment for Kuryakyn Bluegrass Breather Kit - 9930

Part 182805 fits the following machines

Harley-Davidson
  • Dyna Convertible - FXDS-CONV 1995-2000
  • Dyna Low Rider - FXDL 1993-2005
  • Dyna Low Rider Convertible - FXDS-CONV 1994
  • Dyna Super Glide - FXD 1995-2005
  • Dyna Super Glide Sport - FXDX 1999-2005
  • Dyna Super Glide T-Sport - FXDXT 2001-2003
  • Dyna Wide Glide - FXDWG 1993-2005
  • Dyna Wide Glide - FXDWG 2 2001
  • Dyna Wide Glide - FXDWG 3 2002
  • Electra Glide Classic - FLHTC 1990-2005
  • Electra Glide Sport - FLHS 1993
  • Electra Glide Standard - FLHT 1999-2006
  • Electra Glide Ultra Classic - FLHTCU 1993-1999
  • FXR 2 1999
  • FXR 3 1999
  • Heritage Softail - FLST 2006
  • Heritage Softail Classic - FLSTC 1993-2006
  • Heritage Softail Nostalgia - FLSTN 1993
  • Heritage Softail Special - FLSTN 1994-1996
  • Heritage Softail Springer - FLSTS 1997-2003
  • Low Rider - FXRS 1993
  • Low Rider Convertible - FXRS-CONV 1993
  • Low Rider Custom - FXLR 1993-1994
  • Low Rider Sport - FXRS-SP 1993
  • Road Glide - FLTR 1998-2002
  • Road King - FLHR 1994-2006
  • Road King Custom - FLHRS 2004-2006
  • Softail - FXST 1993
  • Softail Custom - FXSTC 1993-1999
  • Softail Deluxe - FLSTN 2005-2006
  • Softail Deuce - FXSTD 2000-2006
  • Softail Fat Boy - FLSTF 1993-2006
  • Softail Night Train - FXSTB 1999-2006
  • Softail Springer - FXSTS 2000-2006
  • Softail Springer Classic - FLSTSC 2005-2006
  • Softail Standard - FXST 1999-2006
  • Sport Glide - FXRT 1993
  • Sportster - XL 883 2004-2006
  • Sportster - XL 883R 2002-2003
  • Sportster - XLH 1200 1991-2003
  • Sportster - XLH 883 1991-2003
  • Sportster Custom - XL 1200C 1996-2006
  • Sportster Custom - XL 883C 1999-2006
  • Sportster Deluxe - XLH 883 1991-1995
  • Sportster Hugger - XLH 883 1991-2003
  • Sportster Low - XL 883L 2005-2006
  • Sportster Roadster - XL 1200R 2004-2006
  • Sportster Sport - XL 1200S 1996-2003
  • Street Glide - FLHX 2006
  • Super Glide - FXR 1993-1994
  • Tour Glide Classic - FLTC 1993-1994
  • Tour Glide Ultra Classic - FLTCU 1993-1995

You May Also Be Interested In

Reviews & Questions
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
4.0 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
1
0
1
1
Fit
3.7 / 5
Quality
4.3 / 5
Style
4.0 / 5
Value
3.7 / 5
Fit
4 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Good Product
This product is nice. the only complaint is there is no 1/2" line included unless you buy the catch tank. Also there is a slight oil smell, I have vent line under tank. I might consider the catch tank to try and eliminate this problem.
May 3, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Nice crankcase vent
This is a very good product, awesome for the money. It completes the look of the air cleaner I put on.
June 6, 2011
Very satisfied
Connected this kit to my 2010 Harley Davidson Wide Glide which is equipped with a after market air filter. Ran the hoses up on top of engine and attached a small breather filter. The banjo elbows could have been a little longer (maybe a 1/2 inch) to make a little more space for the hoses which where a little tight fitting but manageable. No more oil in the air filter. The kit looks great and functions perfectly.
February 1, 2014
Los Angeles, CA
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Great buy
The original breather hoses had started to crack and rot away. These not only look better, but keep oil where it should be, in the engine. I don't remember what stock configuration was, but this was on a Deuce with a Hypercharger. Buy some vacuum caps or plugs for the fittings on the back side of the Hypercharger where the breather hoses connected.
July 19, 2011
Ray City, GA
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
I like them
I replaced the Kuryakyn hypercharger rubber boots with these Bluegrass breather tubes and collect the oil in a small bottle.
It looks good, seals good, and now I can see what was venting into my carb. I had to take out the vacuum working parts in the hypercharger to get clearance. Now it is a scoop style air intake with no moving parts.
November 24, 2015
Purchased
over 4 years ago
Fit
4 / 5
Quality
5 / 5
Style
3 / 5
Value
3 / 5
Pretty Nice
Once I got the right backing plate for my S&S carb, these fit and looked great.
October 21, 2009
Fit
2 / 5
Quality
2 / 5
Style
2 / 5
Value
2 / 5
The plain steel washers leak.
Replace the plain steel washers should be replaced with coated washers to prevent leaks.
October 15, 2015
Phoenix, AZ
Fit
1 / 5
Quality
3 / 5
Style
3 / 5
Value
1 / 5
May be Good for Stock Setup But....
Have a 2012 Fat Bob with a Stage 1 air filter setup. There is absolutely no way the banjo fittings can be used with the Stage 1 back plate without having to modify the back plate. The required modification leaves only the 3 air cleaner screws to support the air cleaner assembly. This results in the assembly shifting downward.
Would be nice to have a note in there somewhere that this won't work on this particular setup.
In a nutshell the site says it will work on an FXDF model but should be at the very least marked as may work.
Massively disappointed
September 14, 2014
Piney Flats, TN