Overview of Kuryakyn Black/Chrome Hi-Five Mach 2 Air Cleaner Only - 9514
Included Items: (1) Air cleaner assembly (5) 1/4-20 x 3/4" Sockethead cap screws (3) 1/4-20 x 1" Sockethead cap screws (3) 1/4-20 x 1-1/4" Sockethead cap screws (1) Air lock ring (2) 1/8" NPT Straight fitting (1) Adapter ring (1) Zombie emblem/adhesive back (1) Emblem mount ring (1) Dual velocity ring (1) Two-Piece filter element (1) Instructions The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California. |
Specs for Kuryakyn Black/Chrome Hi-Five Mach 2 Air Cleaner Only - 9514
| Color - Primary | Chrome |
|---|---|
| Finish | Chrome |
| Type | Air Cleaner |
| Units | Each |
| Weight | 4.35 lbs |
Specs for Kuryakyn Black/Chrome Hi-Five Mach 2 Air Cleaner Only - 9514
| Color - Primary | Chrome |
|---|---|
| Finish | Chrome |
| Type | Air Cleaner |
| Units | Each |
| Weight | 4.35 lbs |
Fitment for Kuryakyn Black/Chrome Hi-Five Mach 2 Air Cleaner Only - 9514
See if this part fits your ridePart 186147 fits the following machines
2.0 / 5.0
1 Review
Fit
2.0 / 5
Quality
5.0 / 5
Style
5.0 / 5
Value
2.0 / 5
Fit
2 / 5
Quality
5 / 5
Style
5 / 5
Value
2 / 5
Kuryakyn Hi-5 air cleaner
1. Catalogue description says "...air cleaner only..." leaving it unclear what else is needed/not supplied.
2. Comes with its own backing plate that doesn't provide integrated breathers: requires separate throttle body support bracket and breather vent kit, neither of which is mentioned in the catalogue description or Kuryakyn literature.
3. Will not fit to standard Stage 1 backing plates sold by H.D., Arlen Ness & a host of the usual suspects.
4. Literature says this will support 140 h.p. motors, however the backing plate opening is for a 50mm throttle body, so they've either changed the laws of physics or are using a blower to get this thing to flow that much air.
2. Comes with its own backing plate that doesn't provide integrated breathers: requires separate throttle body support bracket and breather vent kit, neither of which is mentioned in the catalogue description or Kuryakyn literature.
3. Will not fit to standard Stage 1 backing plates sold by H.D., Arlen Ness & a host of the usual suspects.
4. Literature says this will support 140 h.p. motors, however the backing plate opening is for a 50mm throttle body, so they've either changed the laws of physics or are using a blower to get this thing to flow that much air.
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
November 19, 2012
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
