Overview of Khrome Werks Plug-And-Play Trailer Wiring Connector Kit w/4 Wire Harness and Isolator - 720761
- To be used with current Khrome Werks trailer hitches
- Plug-and-play wiring harness features an isolator module with a fused, separate circuit from battery positive to power the trailer lighting; works through built-in relays and prevent overloading of factory-lighting circuit
- An isolator is a must for 2009 and later Harleys pulling trailers with conventional incandescent lighting (higher amperage requirements than trailers with LED lighting)
- The kit includes the Plug and Play isolator/convertor module with 6 pin Molex plugs, 15 amp fuse/holder, butt connector, ring terminal and a 4 wire 48 in. harness with a flat 4 position connector.
- Made in the U.S.A.
(1) Convertor module with 6 pin molex plugs
(1) 48 in. wire harness with flat 4 position connector
(1) 15 amp fuse
(1) Fuse holder harness
(1) Blue butt connector
(1) Blue ring terminal
Specs for Khrome Werks Plug-And-Play Trailer Wiring Connector Kit w/4 Wire Harness and Isolator - 720761
|Wiring - Hitch
||Hitch - Wiring Harness
Cross reference number(s):