Overview of Khrome Werks Chrome 1 in. Narrow +2 Sweeper 1 in. Handlebar - 300518
- Provide 2 7/16 in. additional pullback at the same height and width as factory
- The throttle grip end is notched and the bar is milled for internal wiring to accommodate the electronic throttle control sensor unit (can also be used on pre-2008 models)
- Cable changes may be required; wire extension for the ETC may or may not be needed
- Dimpled, knurled and available in duplex nickel chrome plated finish
- Made in the U.S.A.
(1) 1 in. chrome steel handlebar
Width: 32 1/4 in
Rise: 11 1/2 in.
Center Width: 12 in.
End Rise: 14 1/4 in.
1 in. Diameter Clamping Width: 12 in.
Inside Width of Knurling/Outside: 2 in./4 1/4 in.
Drilled for Internal Wiring: Yes
Dimpled to Prevent Pinching Control Wires: Yes
Three Notches for 08-up H-D with Electronic Throttle: Yes
Specs for Khrome Werks Chrome 1 in. Narrow +2 Sweeper 1 in. Handlebar - 300518
|Diameter - Handlebar
||12 3/4 in.
||31 3/8 in.
|Pullback/Sweep - Handlebars
||7 5/8 in.
||11 1/2 in.
||Z & Custom
Cross reference number(s):