Dennis Kirk Inc.
Search Within
Ride Search
Top 3 Product Matches

Chrome 1 in. +2 Stretch Handlebar - 300076

  • Part #:
    599875
  • Mfg Part #:
    300076
  • OEM/Ref#:
1 / 1

Chrome 1 in. +2 Stretch Handlebar - 300076

  • Part #:
    599875
  • Mfg Part #:
    300076
  • OEM/Ref#:
Price: $104.95
Make sure this fits your ride
loading...
Ships Free
In Stock - 4 on Hand

Khrome Werks Chrome 1 in. +2 Stretch Handlebar - 300076
  • Diamond knurls, elliptical center slot, drilled dimples with right grip notched for ETC
  • May be used on 1997-2007 models without ETC for internal wiring

NOTE:  BAR IS NOT DRILLED TO ACCOMMODATE STOCK BUILT-IN ALIGNMENT PIN MOUNT IN CONTROL CLAMPS OR RISER BAR CLAMP. 


NOTE: For models listed with Bat Wing fairings

Included Items:
(1) 1 in. chrome steel handlebar

Width: 34 1/2 in.
Rise: 11 1/2 in.
Pullback: 5 in.
Center Width: 12 in.
End Rise: 13 3/4 in.
1 in. Diameter Clamping Width: 12 in.
Inside Width of Knurling/Outside: 2 in./4 1/8
Drilled for Internal Wiring: Yes
Dimpled to Prevent Pinching Control Wires: Yes
Three Notches for 08-Up H-D with Electronic Throttle: Yes

Specifications
Part #: 599875
Mfg #: 300076
Center Width 12 in.
Color Chrome
Description Dimpled/Drilled
Diameter - Handlebar 1 in.
End Rise 13 3/4 in.
Overall Width 34 1/2 in.
Pullback/Sweep - Handlebars 5 in.
Rise 11 1/2 in.
Type OEM Replacement Bend
Units Each
Weight 3.75 lbs
Alternate/OEM Part Number(s):
06012647
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Fitment for Khrome Werks Chrome 1 in. +2 Stretch Handlebar - 300076

Part 599875 fits the following machines

Harley-Davidson
  • Electra Glide Classic - FLHTC 2009-2013
  • Electra Glide Classic (EFI) - FLHTC 2008
  • Electra Glide Police - FLHTP 2014-2018
  • Electra Glide Standard - FLHT 2009, 2019-2020
  • Electra Glide Standard (EFI) - FLHT 2008
  • Electra Glide Ultra Classic - FLHTCU 2009-2019
  • Electra Glide Ultra Classic (EFI) - FLHTCU 2008
  • Electra Glide Ultra Classic Low - FLHTCUL 2015-2016
  • Electra Glide Ultra Limited - FLHTK 2010-2020
  • Electra Glide Ultra Limited Low - FLHTKL 2015-2019
  • Road Glide - FLTRX 2015-2020
  • Road Glide CVO/SE - FLTRXSE 2018
  • Road Glide Limited - FLTRK 2020
  • Road Glide Special - FLTRXS 2015-2020
  • Road Glide Ultra - FLTRU 2016-2019
  • Street Glide - FLHX 2009-2012, 2014-2020
  • Street Glide (EFI) - FLHX 2008
  • Street Glide Special - FLHXS 2014-2020
  • Tri Glide Ultra Classic - FLHTCUTG 2014-2020
  • Tri-Glide CVO/SE - FLHTCUTGSE 2020
Reviews & Questions
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
Will the knurl pattern fit a wide Glide setup with factory risers?
A shopper on Sep 9, 2017
BEST ANSWER: Yes it should
With 11 1/2" rise will stock wiring and brake cables work??
A shopper on Dec 20, 2016
BEST ANSWER: It is hit or miss on this height, Normally 10" is the ceiling for not having to utilize extended cables. I would highly recommend them for this bar.
5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Finish
5.0 / 5
Fit
5.0 / 5
Quality
4.5 / 5
Value
5.0 / 5
Would you recommend this product?
Yes (1)
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
2014 FLHTK
Received the item quickly and well packaged.
These bars were perfect for me, wanting a little more height and because of the angle towards the rider, they move the controls a little closer, too. With a 2" rise, there's no need to extend wiring or change hydraulic lines. With bars in the forward most position, the back of your hands, while on the bars, will be about even with the top edge of the fairing, still allowing weather protection while gaining some airflow to mesh gloves during hot weather.
November 3, 2017
Purchased
over 2 years ago
Finish
5 / 5
Fit
5 / 5
Quality
4 / 5
Value
5 / 5
Nice fit
2016 ultra limited took about 4 hrs to install top of hands just below faring when all the way forward also way better on the wrist can't go wrong with these bars.
User submitted image
Added Mar 30, 2018
March 30, 2018
Purchased
1 year ago