• Diamond knurls for risers on 3.50 inch centers, elliptical center slot, slotted grips with the right side flattened for master cylinder clearance and notched for ETC
• May be used on 1997-2007 models without ETC

Note: One piece upper riser clamp (H-D 55918-08) must be used when installing bars with center elliptical slot on pre-2008 baggers.

Note:For models listed with Bat Wing Fairings

Included Items:
(1) 1 in. chrome steel handlebar

Width: 35 in.
Rise: 13 in.
Pullback: 5 in.
Center Width: 12 in.
End Rise: 15 in.
1 in. Diameter Clamping Width: 12 in.
Inside Width of Knurling/Outside: 2 in./4 1/8 in.
Drilled for Internal Wiring: Yes
Dimpled to Prevent Pinching Control Wires: Yes
Three Notches for 08-Up H-D with Electronic Throttle: Yes