NOTE: Requires speedometer sensor block-off plate kit (#27-1591); if speedometer is not driven from transmission, then two block-off plates kits are required. NOTE: Requires speedometer be recalibrated. NOTE: Trap door extends 3/8" farther to right than stock part. Alteration to some parts that attach to or around the trap door may be required This item ships 3-4 business days after order is processed Included Items: (1) Gear assembly (1) 5th gear main shaft (1) Gasket set (1) Shift lever assembly (1) 1/2 in. flat washer (1) 7/16 in.-14 x 2 in. socket head bolt (1) Snap ring (1) 7/16 in. ID x 1 3/4 in. spacer (2) 4th gear shift fork (1) 2nd gear shift fork (1) 3rd gear shift fork (1) 1st gear shift fork (1) Shift fork rod (1) Neutral switch (1) 45 x 85 x 19 bearing (1) Large snap ring (1) Needle bearing (1) 1 in. ID x 1 in. long spacer (1) Wire harness (1) Pink butt connector (1) Ring terminal (4) 5/16 in.-18 x 1 1/4 in. socket head bolts (2) 1/4 in.-20 x 1 1/4 in. socket head bolts (3) 1/4 in.-20 x 1 1/4 in. socket head bolts (1) 1/4 in.-20 x 1 in. button head bolt (5) 1/4 in. flat washers (2) 1/4 in.-20 x 2 in. socket head bolts (1) 1/2 in.-20 x 1 in. set screw (1) 10mm-1.00 set screw (1) 10mm-1.00 magnetic drain plug (2) 1/4 in. ID x 1/4 in. split bushings (1) thrust bearing (2) Thrust washers (1) Small snap ring (1) Clutch release rod Instructions |
Mfg #: | 8085 |
---|---|
Part #: | 110300 |
Type | Gear |
Units | Set |
Weight | 27.70 lbs |
Part 110300 fits the following machines