Overview of J&M Corporation Rokker XXRP 630W 4-CH DSP Programmable Amplifier Kit - JAMP-630HR11ULP
This new J&M ROKKER XXRP DSP controlled 4-channel 630 watt RMS fairing/rear speaker amplifier kit has been designed specifically for use on the 2011-2013 Harley® RoadGlide Ultra (NOT for CVO) with the stock Harley HK radio.
The specific plug-n-play RCA input harnesses included with this amplifier kit, take the 4-channels of audio signal available from the RoadGlide Ultra version of the Harley HK radio and provides 4 separate channels of amplification at 157.5 watts RMS continuous power per-channel into a 2 or 4-ohm speaker load. (Manually selectable on the amplifier itself for a 2-ohm or 4-ohm speaker load)
This is a full range class D digital amplifier properly shielded against RF interference into the AM or FM stereo radio bands.
These new ROKKER XXRP series amplifiers are fully programmable thru the internal digital signal processor (DSP) and come out of the box already dialed in for this specific RoadGlide Ultra speaker configuration, to provide maximum highway performance from your Harley Davidson audio system.
Should you wish to alter these DSP settings using the internal programming dongle already built into this new amplifier, (USB computer connection cable also included with this amplifier kit) all of our specific custom amplifier programs are now available as a consumer download from the J&M website @ www.jmcorp.com
Also included are our custom made heavy-gauge power and ground wires used for the fused battery & frame connections, along with all necessary mounting hardware & complete installation/operation instructions.
Amplifier itself measures 8 1/4” Long X 5 1/8” Wide X 1 5/8” Tall.
(1) 8-1/4" long x 5-1/8" wide x 1-5/8" tall AMP W/(4) female audio connectors, (1) 2 pin male connector & (1) 10 pin female connector
(1) 65" Wire harness W/(1) 30 amp in-line fuse, (2) ring terminals and (1) 2 pin female connector
(1) 26" wire harness W/(2) male audio connectors & (4) male spade connectors
(1) 17-1/2" red and black wires W/(1) tiny light & (1) 2 pin female connector
(1) 20-1/2" USB cable
(1) Wiring harness W/(1) 9 pin female connector, (9) female spade connectors, (5) male spade connectors & (2) male audio connecors
(12) 8" Black cable ties
Cross reference number(s):44050437
Specs for J&M Corporation Rokker XXRP 630W 4-CH DSP Programmable Amplifier Kit - JAMP-630HR11ULP
|Ohm Rating||2 ohm|
|Ohm Rating||4 ohm|
|Total Watt Output||157.5w|
Fitment for J&M Corporation Rokker XXRP 630W 4-CH DSP Programmable Amplifier Kit - JAMP-630HR11ULPSee if this part fits your ride
Part 4000883 fits the following machines
- 2013 Harley-Davidson Road Glide Custom - FLTRX
- 2012 Harley-Davidson Road Glide Custom - FLTRX
- 2011 Harley-Davidson Road Glide Custom - FLTRX
- 2013 Harley-Davidson Road Glide Ultra - FLTRU
- 2012 Harley-Davidson Road Glide Ultra - FLTRU
- 2011 Harley-Davidson Road Glide Ultra - FLTRU