Overview of J&M Corporation Rokker XXRP 630W 4-CH DSP Programmable Amplifier Kit - JAMP-630HR06RCP
This new J&M ROKKER XXRP DSP controlled 4-channel 630 watt RMS fairing/rear speaker amplifier kit has been designed specifically for use on the 2006-2013 Harley® RoadGlide (NOT for 2012-2013 CVO) with the stock Harley HK radio with rear-lid or lower-fairing speakers added.
The specific plug-n-play RCA input harnesses included with this amplifier kit, take the 2-channels of audio signal available from the RoadGlide version of the Harley HK radio and provides 4 separate channels of amplification at 157.5 watts RMS continuous power per-channel into a 2 or 4-ohm speaker load. (Manually selectable on the amplifier itself for a 2-ohm or 4-ohm speaker load)
This is a full range class D digital amplifier properly shielded against RF interference into the AM or FM stereo radio bands.
These new ROKKER XXRP series amplifiers are fully programmable thru the internal digital signal processor (DSP) and come out of the box already dialed in for this specific RoadGlide custom speaker configuration, to provide maximum highway performance from your Harley Davidson audio system.
Should you wish to alter these DSP settings using the internal programming dongle already built into this new amplifier, (USB computer connection cable also included with this amplifier kit) all of our specific custom amplifier programs are now available as a consumer download from the J&M website @ www.jmcorp.com.
Amplifier itself measures 8 1/4” Long X 5 1/8” Wide X 1 5/8” Tall.
(1) 8-1/4" long x 5-1/4" wide x 1-5/8" high AMP W/(4) female audio connectors, (1) 2 pin male connector & (1) 10 pin female connector
(1) 65" Wire harness W/(1) 30 amp in-line fuse, (2) ring terminals and (1) 2 pin male connector
(1) 26" wire harness W/(4) male spade terminals & (2) male audio terminals
(1) 25' Wire harness W/(2) male audio terminals & (1) 4 wire connector
(1) 17-1/2" red and black wires W/(1) tiny light & (1) 2 pin female connector
(1) 20-1/2" USB cable
(1) Wiring harness W/(1) 9 pin female connector, (5) female spade connector & (1) male spade connector
(12) 8" Black cable ties
Cross reference number(s):44050436
Specs for J&M Corporation Rokker XXRP 630W 4-CH DSP Programmable Amplifier Kit - JAMP-630HR06RCP
|Ohm Rating||2 ohm|
|Ohm Rating||4 ohm|
|Total Watt Output||157.5w|
Fitment for J&M Corporation Rokker XXRP 630W 4-CH DSP Programmable Amplifier Kit - JAMP-630HR06RCPSee if this part fits your ride
Part 4000882 fits the following machines
- 2009 Harley-Davidson Road Glide - FLTR
- 2008 Harley-Davidson Road Glide (EFI) - FLTR
- 2007 Harley-Davidson Road Glide (EFI) - FLTR
- 2013 Harley-Davidson Road Glide Custom - FLTRX
- 2012 Harley-Davidson Road Glide Custom - FLTRX
- 2011 Harley-Davidson Road Glide Custom - FLTRX
- 2010 Harley-Davidson Road Glide Custom - FLTRX
- 2006 Harley-Davidson Road Glide Injected - FLTR I
- 2013 Harley-Davidson Road Glide Ultra - FLTRU
- 2012 Harley-Davidson Road Glide Ultra - FLTRU
- 2011 Harley-Davidson Road Glide Ultra - FLTRU