NOTE: Part No. 4000558 is required if installing this amp in Road Glide Models NOTE: Not compatible with CVO models with factory amplifiers installed. Included Items: (1) 8 3/4 in. long x 4 3/4 in. wide x 1 3/4 in. high black aluminum amp (2) Black steel side plates (1) Black steel module shelf (1) Power wire harness (1) Rear output wire harness (1) Front output wire harness (1) Bypass wire harness (1) Input wire harness (1) Rear speaker wire harness (7) Small phillips screws (1) 5 1/4 in. x 3 in hook and loop strip with adhesive back (2) 6mm-1.00 x 12mm carriage bolts (2) 6mm-1.00 nyloc nuts (10) Black cable ties Instructions |
Channel | 4 ch |
---|---|
Mfg #: | NCA450 |
Ohm Rating | 2 ohm |
Part #: | 4000172 |
Total Watt Output | 200w |
Type | Amplifier |
Units | Each |
Weight | 6.95 lbs |
Part 4000172 fits the following machines