Overview of High Lifter Signature Series 2 in. Lift Kit - PLK9RZRT-50
Bigger. Badder. BOLDER. Take your ATV to the edge with High Lifters 1 in. Signature Series Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 15 years perfecting the ultimate ATV lift kit. The Signature Series Lift Kit is even easier to install with a bolt-on application that consistently measures truer over competitor products.
The High Lifter 1 in. Signature Series Lift Kit relocates the shock mounts to provide additional lift making room for larger tires and tightens suspension. Each Lift Kit part is precision cut and powder coated for durability and reliability in any environment.
- All hardware needed for successful installation
- High Lifter logo precision laser cut into each kit
- User-friendly instructions
- Bolt-on application
- Powder-coated in hammer-tone black
- Front and rear lift
- Made in the U.S.A.
2017 models require moving the sway bar link from the outside to the inside of the sway bar.
(2) Black aluminum front lift brackets
(2) Black aluminum inner rear lift brackets
(2) Black aluminum outer rear lift brackets
(1) Aluminum logo plate
(2) 6mm-1 X 25mm Button head bolts
(2) 6mm-1 Nylock nuts
(2) 6mm Flat washers
(6) 10mm-1.5 X 70mm Hex head bolts
(4) 10mm-1.5 X 60mm Hex head bolts
(10) 10mm-1.5 Nylock nuts
(8) 10mm Washers
(2) Front lift large aluminum spacers
(2) Front lift small aluminum spacers
(2) Rear lift aluminum spacers
Specs for High Lifter Signature Series 2 in. Lift Kit - PLK9RZRT-50
||Lift Kit - Front/Rear
Cross reference number(s):