• 3-step header pipes 1 3/4″ to 1 7/8″ to 2″ for anti-reversion, full range torque and horsepower
• 2 1/2″ O.D., 220º one piece heavy duty 16 gauge heat shields
• O2 ports & plugs provided for early models
• Complete with mounting hardware and brackets
• Deep throaty roar

(1) Black 2 into 1 Header/Muffler assembly with baffle installed

(1) Black front heat shield

(1) Black rear heat shield

(1) Black turnout tip  

(1) Mounting bracket

(1) 5/16"-18 Nut plate 

(2) 18mm x 1.50 Bung plug zinc plated

(2) 12mm x 1.25 Bung plug zinc plated

(2) 1/2"-13 x 1-3/4" Socket cap head bolts

(1) 3/8"-16 x 3-1/4" Socket cap head bolt

(1) 3/8"-16 x 2" Socket cap head bolt

(2) 3/8' Flat washers

(2) 5/16"-18 x 5/8" Serrated flange hex head bolts

(2) 1/2" Split lock washers

(2) 0.750" x 0.122" x .0750" Aluminum spacers

(2) 0.625" x 0.123" x 0.750 Aluminum spacers

(1) 6" Black cable tie

Instructions

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.