Dennis Kirk Inc.
Search Within
Ride Search
Top 3 Product Matches

HP+ Series Water-Cooled Oil System Kit - 7098

  • Part #:
    1401831
  • Mfg Part #:
    7098
1 / 1

HP+ Series Water-Cooled Oil System Kit - 7098

  • Part #:
    1401831
  • Mfg Part #:
    7098
Price: $999.95
Make sure this fits your ride
Ships Free
Ships In 4-5 Business Days

Feuling Parts HP+ Series Water-Cooled Oil System Kit - 7098
  • Quieter and smoother engine operation
  • Increase oil pressure, scavenge volume and engine oil flow
  • 15-25 degree cooler engine temperatures
  • 15-30 degree cooler oil temperatures
  • 10-30 more PSI of oil pressure
  • Eliminate wet sumping, blow by and oily air cleaners
  • Test results show 2 horsepower gain and 2 ft./lb. of torque gain to the rear wheel
  • HP+ Series kits include billet 6061 aluminum high-volume oil pump, high flow cam plate, HP+® hydraulic roller lifters and cam installation kit
  • HIGH FLOW billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or Feuling OE+ camplates. FEULING® increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil port holes throughout the camplate to the port holes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings.
  • Oil pumps are bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psi. The increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function. The FEULING® oil pump and camplate combination eliminate common pressure and scavenge issues associated with the factory oiling systems. 

Note:

  • For TWIN-COOLED™ MOTORS

 



Included Items:

(1) Red camplate

(1) Oil pump

(4) Lifters

(1) Roller bearing

(1) #263 Threadlocker

(1) Tube engine assembly lube

(1) 3/8"-24 x 1-3/4" Flange 12-point external wrenching head bolt

(1) 3/8" Spacer

(1) 5/16"-18 x 3/4" Flange 12-point external wrenching head bolt

(1) 5/16" Spacer

(3) Engine case gasket

(2) Exhaust gaskets

(20) O-rings(assorted sizes)

(2) Rocker box gaskets

Instructions

Specifications
Mfg #: 7098
Part #: 1401831
Rate High Pressure
Type Oil Pump
Units Each
Weight 6.10 lbs
Resources & Manuals
Fitment for Feuling Parts HP+ Series Water-Cooled Oil System Kit - 7098

Part 1401831 fits the following machines

Harley-Davidson
  • Electra Glide Ultra Limited - FLHTK 2017-2020
  • Electra Glide Ultra Limited CVO/SE - FLHTKSE 2017-2020
  • Electra Glide Ultra Limited Low - FLHTKL 2017-2019
  • Road Glide Ultra - FLTRU 2017-2019
  • Street Glide CVO/SE - FLHXSE 2017-2020
  • Street Glide Special - FLHXS 2017-2020
  • Tri Glide Ultra Classic - FLHTCUTG 2017-2020
  • Tri-Glide CVO/SE - FLHTCUTGSE 2020
Reviews & Questions
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
There are no reviews for this item. Write Review