525 GRIND Intake Duration @ .053 in.: 226 degree Valve Lift: .525 in. Open: 4 degree Close: 42 degree Lift @ TDC: .099 in. Lobe Centerline: 109 degree Exhaust Duration @ .053 in.: 236 degree Valve lift: .535 in. Open: 51 degree Close: 5 degree Lift @ TDC: .112 in. Lobe Centerline: 113 degree NOTE: Conversion cams use early 99-06 style inner cam journals with late style 07-13 outer journals requiring late style hydraulic chain tensioners, sprockets and chains. Included Items: (1) Aluminum cam plate (1) 5/16 in.-24 set screw (2) Caged needle bearings (4) Hydraulic roller lifters (1) Oil pump (3) O-rings (2) Cam shafts (4) 1/4 in.-20 x 1 1/4 in. black flange had bolts (6) 1/4 in.-20 x 1 in. black flange head bolts (2) Intake pushrods with bases (2) Exhaust pushrods with bases (1) Adjustment fixture (1) .017 fluid oz. 271 loctite high strenght threadlocker (1) .02 fluid oz. 262 loctite permanent strength threadlocker (1) .5 oz/ tube assembly lubricant (1) 3/8 in.-24 x 1 3/4 in. black flange head bolt (1) 3/8 in. black spacer washer (1) 5/16 in.-18 x 3/4 in. black flange head bolts (1) 5/16 in. black spacer washer (1) Black snap ring (1) Cam change gasket includes (4) Pushrod tube center O-rintgs, (4) Tappet black o-rings, (2) Oil pump O-rings, (2) Twin-cam tappet cover gaskets, (1) Cam gear cover beaded gasket, (2) Copper wire exhaust gaskets The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California. |
Mfg #: | 7220 |
---|---|
Part #: | 146104 |
Type | Cam |
Type | Camshaft |
Units | Kit |
Weight | 11.10 lbs |
Part 146104 fits the following machines