465 CAM - The 465 Reaper is an accelerator, producing solid bottom end performance with substantial gains above 2,800 RPM when compared to stock. This direct bolt in replacement for Milwaukee Eight engines can be used with stock valve springs, pushrods, lifters and exhaust. Will respond well with slip-on mufflers and or performance exhaust system and air cleaner. Use of performance valve-springs is not required but may result in a quieter, smoother running valve-train, see Part No. 189642. This cam will also respond well with increased bore and or compression. Easy starting with unique idle sound. Better throttle response.
Made in U.S.A.
RPM range: 1,850 - 5,950, Grind: 465, Overlap: 10
CAM SPECS ARE MEASURED ON THE LIFTER @.0.050" LIFT WITH 1.61 ROCKER ARM RATIO
Intake: .445" Valve Lift, 4° Open, 23° Close, 207° Duration @.050", .100" lift @ TDC, 99.5° Lobe Centerline
NOTE: FEULING HIGHLY RECOMMENDS RUNNING ONE PIECE PUSHRODS OVER QUICK INSTALL ADJUSTABLE RODS TO MAINTAIN MAXIMUM CAM/VALVE LIFT AND REDUCE VALVETRAIN HARMONICS AND ASSOCIATED HYDRAULIC LIFTER ISSUES. OFFER FEULING PUSHRODS PART NO. 1401311
(1) Reaper camshaft
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.
Part 1401135 fits the following machines