Got the boot on. This is a 'universal' boot pkg that fits two different size joint housings. Mine was the smaller diam., so it required cutting off the excess 1/2" or rubber that would be used for the larger joint housing. I don't care for the style of band clamp supplied, but they do work. The biggest problem was the instructions were not detailed enough at some points.... like weather to cut the 'excess' boot material off before installing. With that said, it is a good package. The other side will go faster now that I know what to expect.
Product info stated it would fit front or rear. Did not fit rear. Front boot had to be cut to second inner grove due to the boot is universal and setup for two different size joints. Once cut to fit c/c housing, the boot was so tight it did not have any room to flex.
I have installed dozens of boot kits on vehicles and a number of them on ATVs. These are horrible. They do not have the proper lip to fit into the grove as a factory one on the large end. The clamps are the twist style rather than the pinch down type, so they do not properly clamp down. They are an expensive joke.