Overview of Dynojet Stage 1 Jet Kit - 2130
(12) Main jets(6 ea. -096,100)
(6) Fuel needles
(6) Adjusting washers
(3) Slide weights
(1) Plug drill
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.
Cross reference number(s):DJ2130
Specs for Dynojet Stage 1 Jet Kit - 2130
Fitment for Dynojet Stage 1 Jet Kit - 2130See if this part fits your ride
Part 171759 fits the following machines
- 1982 Kawasaki KZ1300A
- 1981 Kawasaki KZ1300A
- 1980 Kawasaki KZ1300A
- 1979 Kawasaki KZ1300A
- 1980 Kawasaki KZ1300B
is because i didn't use all of it.The air/fuel tool
would slip on the air/fuel screw, i had to bend
the flat edge to make it work.I did what is called
the scar mod,you can look it up on the vtx forums.
I used the spring out of this kit and put one shim
under the stock needle and turned the air fuel
screw in and back out 2 1/2 turns and my bike
is running good.I also cut part of the tit under the
needle holder cap the way the scar mod said to.
Hope this helps someone.