Need Assistance?
Legendary Service... Ask Your Friends - Since 1969
800.969.7501
Over 160K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Dynojet Stage 1 Jet Kit - 2130

  • Part #:
    171759
  • Manufacturer Part #:
    2130

MSRP Price: $139.95

Our Price: $113.36

You Save:
$26.59 (19%)
1 on Hand

Overview of Dynojet Stage 1 Jet Kit - 2130

  • Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems
  • Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters
  • Get better throttle response and driveability
  • Expect power increases of approximately 5 percent throughout the power range
  • Will only fit models with carbs

Included Items:
(12) Main jets(6 ea. -096,100)
(6) Fuel needles
(6) Adjusting washers
(6) E-Clips
(3) Slide weights
(1) Plug drill
(1) Screw

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

Specs for Dynojet Stage 1 Jet Kit - 2130

Type Main Jet
Type Jet
Units Kit
Weight 0.37 lbs

Cross reference number(s):

DJ2130

Specs for Dynojet Stage 1 Jet Kit - 2130

Type Main Jet
Type Jet
Units Kit
Weight 0.37 lbs

Fitment for Dynojet Stage 1 Jet Kit - 2130

See if this part fits your ride

Part 171759 fits the following machines

Kawasaki
  • 1982 Kawasaki KZ1300A
  • 1981 Kawasaki KZ1300A
  • 1980 Kawasaki KZ1300A
  • 1979 Kawasaki KZ1300A
  • 1980 Kawasaki KZ1300B
4.8 / 5.0
24 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
18
6
0
0
0
Fit
4.7 / 5
Quality
4.9 / 5
Style
4.8 / 5
Value
4.6 / 5
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Amazing Product
I bought this kit after installing a exhaust on my 07 honda VTX 1300. I found it remarkably easy to install. It increased my throttle response and fuel mileage more than I expected! I was very happy with everything that Dennis Kirk did.
April 25, 2011
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
NO MORE BACKFIRE!!!
I put the stage one kit in my wife's stock 2005 Suzuki S40 single cylinder 650 trying to eliminate the constant backfiring while shifting or shutting it off. IT WORKS AWESOME !!!!! Just went for a 50 mile ride and only popped once while shifting and NOT when she shut it off. The kit had many options for different stages, I only used the stage 1 parts. Very simple & straightforward install. Needed no other parts. Took about 45 minutes. Definitely worth the price for me !!!!!
April 25, 2011
Fit
4 / 5
Quality
5 / 5
Style
5 / 5
Value
4 / 5
Great Product - Poor Instructions
Product is very good, however the directions need a lot to be desired. If you have never done a re-jet before find a good website online that walks you through it. It is very easy, but the directions included with this product is pretty weak. The product itself is very good.
May 12, 2011
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
4 / 5
this is a awesome kit
I bought this kit for my rf900r suzuki. It opened my bike up and gave me the power i was lookn for. I have never installed one before but found the instructions easy to follow and this made for a clean easy install. would recomend this for any bike lover it is well worth the price for the gains.
January 22, 2011
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
good product
Kit comes with everything needed.
highly recommended
April 27, 2011
Fit
4 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Jet kit
I guess this is a good kit.The reason i said that
is because i didn't use all of it.The air/fuel tool
would slip on the air/fuel screw, i had to bend
the flat edge to make it work.I did what is called
the scar mod,you can look it up on the vtx forums.
I used the spring out of this kit and put one shim
under the stock needle and turned the air fuel
screw in and back out 2 1/2 turns and my bike
is running good.I also cut part of the tit under the
needle holder cap the way the scar mod said to.
Hope this helps someone.
April 18, 2013
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
VT750C2 Jet Kit
This kit was just what the doctor ordered for my bike after I installed my Vance & Hines pipes. It was fairly easy to install if you are mechanically inclined, otherwise let your shop do it for you. The power increase is noticable.
October 22, 2012
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Major Difference Immediately
This Stage 1 jet kit is awesome. I installed it on my '02 Shadow Spirit VT1100C and instantly felt a difference. The bike starts up immediately, the acceleration is very fluid and this has cured any decel popping I once had. I highly recommend this kit for anyone looking to smooth out their power band and let the full potential of their engine come to life!
June 14, 2012
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Works well.
I put these on my 93 virago 1100 with jardine rumblers. Installation was fairly straight forward. I found it odd that the hole in the new jets (mine came with 2x110 and 2x114) was smaller than the stock jets, but the needle shape and position must make up for that.
April 2, 2012
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
No Review Title Entered By User
This product was very easy to install and set up just by using the directions. The bike ran excellent after the installation. Very happy with the product.
April 18, 2011
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Instructions and Manuals for Dynojet Stage 1 Jet Kit - 2130

You May Also Be Interested In