Dynojet Secondary Fuel Module - SFM1

• Allows for the adjustment of all eight-injectors
• Using OEM connectors, these connect to the upper injector rail
• Single cable connection to the Power Commander V
• Can adjust the upper and lower injectors by as much as +250/-100%
• Adjust all of the injectors on a per gear basis when the gear position input is connected to the PCV
• You can also map each injector separately: providing you with up to 48 complete maps
• The basic mode provides you a single fuel table to put the requested fuel change in both upper and lower injector modules at the same time
• For modified engines that require more fuel than four-injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately, the Basic setting is perfect for you
• Use of a Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality is allowed in the secondary fuel module

Included Items:

(1) Secondary fuel module

(1) CAN cable

(1) CAN termination plug

(1) Installation guide

(2) Velcro

(1) Alcohol swab

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.