Overview of Dynojet Secondary Fuel Module - SFM-14
- Most of todays high performance, four cylinder Sport Bikes have two injectors per cylinder. The Power Commander V connects to 4 of those 8 injectors. In virtually all cases the PCVs +250% / -100% fuel adjustability allows more than enough adjustment for all but the most radically altered engines. However, we recognize that there are people building heavily modified engines (extreme big bore, turbo, etc) that may require the adjustment of all 8 injectors.
- Enter the Power Commander V Secondary Fuel Module. The S.F.M. connects to the upper injector rail using OEM connectors. From there, it is only a single cable connection to the PCV. Once connected, you will be able to adjust both upper and lower injectors by as much as +250/-100%.
- If the gear position input is connected on your PCV you will have the ability to adjust all of the injectors on a per gear basis (a complete map for every gear) as well as the ability to map each injector separately. That gives you up to 48 complete maps!
- There will also be a basic mode that allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time. For those of you that have modified engines that require more fuel than 4 injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately, this setting is for you.
- In addition to the increased fuel adjustability the SFM provides, it also allows for the use of the Dynojet Quick Shifter sensor on 8 injector bikes. On earlier Power Commanders an Ignition Module or Stand Alone Ignition Quick Shifter was necessary to use the DQS on bikes with 8 injectors. Now, you can have both added fuel control and shifter functionality at a very low price.
(1) Secondary fuel module W/wiring harness
(1) CAN link cable
(3) Cable ties
(2) Velcro® strips W/adhesive
(1) Alcohol swab
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.
Specs for Dynojet Secondary Fuel Module - SFM-14
||Fuel Injection Module
Cross reference number(s):