Dennis Kirk Inc.
Legendary Service... Ask Your Friends - Since 1969
Need Assistance?
Over 150K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Dynojet Power Commander V Includes Secondary Fuel Module (S.F.M.) - 10-001X

  • Part #: 209918
  • Manufacturer Part #: 10-001X

MSRP Price: $599.95

Our Price: $539.96

You Save:
$59.99 (10%)
1 on Hand

Overview of Dynojet Power Commander V Includes Secondary Fuel Module (S.F.M.) - 10-001X

  • Features fuel and timing control, Rev Xtend and is a reduced size from the PCIII USB
  • Warm-up fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading)
  • The Power Commander III USB allowed you to add extra fuel during start-up based on number of revolutions of the engine
  • Now the easy-to-install Power Commander V reads the exact engine temp through the bikes own ECM, allowing the tuner to choose how much fuel to add
  • More tuning ranges than PCIII USB
  • Enhanced accel pump utility
  • USB powered from computer; 9 volt adapter is no longer needed
  • Cold starting on heavily modified engines should now be much more controllable and easy to adjust
  • Software displays J1850 data from bikes stock ECU
  • Two-position map switching function built in
  • Can add any SPST switch and toggle between two different fuel/timing maps
  • Gear/speed input allows for map adjustment based on gear
  • Analog input allows user to install any 0-5 volt sensor
  • Build an adjustment table based on analog input such as boost or temperature
  • Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
  • Ten throttle position columns
  • Made in the U.S.A.


  • SECONDARY FUEL MODULE AND QUICK SHIFTER EXPANSION MODULE
  • Allows for the adjustment of all eight-injectors
  • Using OEM connectors, these connect to the upper injector rail
  • Single cable connection to the Power Commander V
  • Can adjust the upper and lower injectors by as much as +250/-100%
  • Adjust all of the injectors on a per gear basis when the gear position input is connected to the PCV
  • You can also map each injector separately: providing you with up to 48 complete maps
  • The basic mode provides you a single fuel table to put the requested fuel change in both upper and lower injector modules at the same time
  • For modified engines that require more fuel than four-injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately, the Basic setting is perfect for you
  • Use of a Dynojet Quick Shifter sensor (sold separately) on eight-injector bikes which provides added fuel control and shifter functionality is allowed in the secondary fuel module

Included Items:
(1) Power Commander
(1) USB cable
(1) CD-Rom
(1) Installation guide
(2) Power commander decals
(2) Dynojet decals
(2) Velcro strips
(1) Alcohol swab
(2) Posi-taps
(1) Secondary fuel module

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

Specs for Dynojet Power Commander V Includes Secondary Fuel Module (S.F.M.) - 10-001X

Type Fuel Injection Module
Units Each
Weight 2.05 lbs

Specs for Dynojet Power Commander V Includes Secondary Fuel Module (S.F.M.) - 10-001X

Type Fuel Injection Module
Units Each
Weight 2.05 lbs

Fitment for Dynojet Power Commander V Includes Secondary Fuel Module (S.F.M.) - 10-001X

See if this part fits your ride

Part 209918 fits the following machines

Aprilia
  • 2009 Aprilia RSV4
  • 2010 Aprilia RSV4 Factory
  • 2011 Aprilia RSV4 Factory APRC SE
  • 2011 Aprilia RSV4 R
  • 2010 Aprilia RSV4 R
  • 2011 Aprilia RSV4 R APRC
There are no reviews for this item. Write Review

Instructions and Manuals for Dynojet Power Commander V Includes Secondary Fuel Module (S.F.M.) - 10-001X

You May Also Be Interested In