Need Assistance?
Legendary Service... Ask Your Friends - Since 1969
800.969.7501
Over 160K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Dynojet Power Commander V - 14022

  • Part #:
    2000913
  • Manufacturer Part #:
    14022

MSRP Price: $419.95

Our Price: $349.88

You Save:
$70.07 (17%)
1 on Hand

Overview of Dynojet Power Commander V - 14022

  • Fuel control for each individual cylinder in a smaller enclosure
  • Warm up fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading)
  • Reduced size from the PCIII USB
  • Easy to install
  • USB powered from computer; 9 volt adapter is no longer needed
  • Two-position map switching function built-in
  • Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
  • Gear/speed input allows for map adjustment based on gear
  • Analog input allows user to install any 0-5 volt sensor
  • Build an adjustment table based on analog input such as boost or temperature
  • Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
  • More tuning ranges than PCIII USB
  • Enhanced accel pump utility
  • Made in the U.S.A.

    Included Items:
    (1) Power commander with (1) male three spade connector, (1) female three spade connector, (1) female nineteen pin connector and (1) male nineteen pin connector with aluminum lock ring
    (1) 72 in. USB cable
    (3) Rubber plugs
    (1) Alcohol prep packet
    (2) 2 in. x 5/8 in. self adhesive velcro strip
    (1) CD-rom

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

Specs for Dynojet Power Commander V - 14022

Type Fuel Injection Module
Units Each
Weight 1.65 lbs

Specs for Dynojet Power Commander V - 14022

Type Fuel Injection Module
Units Each
Weight 1.65 lbs

Fitment for Dynojet Power Commander V - 14022

See if this part fits your ride

Part 2000913 fits the following machines

Ducati
  • 2013 Ducati Superbike 1199 Panigale
  • 2012 Ducati Superbike 1199 Panigale
  • 2013 Ducati Superbike 1199 Panigale ABS
  • 2012 Ducati Superbike 1199 Panigale ABS
  • 2013 Ducati Superbike 1199 Panigale S
  • 2012 Ducati Superbike 1199 Panigale S
  • 2013 Ducati Superbike 1199 Panigale S ABS
  • 2012 Ducati Superbike 1199 Panigale S ABS
  • 2013 Ducati Superbike 1199 Panigale S Tricolore
  • 2012 Ducati Superbike 1199 Panigale S Tricolore
  • 2013 Ducati Superbike 1199 Panigale S Tricolore ABS
  • 2012 Ducati Superbike 1199 Panigale S Tricolore ABS
There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Instructions and Manuals for Dynojet Power Commander V - 14022

Owner's Manual Owner's Manual PDF 602.0 KiB