Overview of Dynojet Power Commander Fuel Controller - FC17060
The Power Commander FC is a new plug-n-play fuel management device pre-programmed with Make/ Model specific maps. In addition the Power Commander FC has the added ability to modify or change these maps on the fly without a computer.
Users can literally select between a Power Commander FC Map, custom-built maps, or even fine tune low, mid or high rpm ranges while sitting on the bike and without plugging into a computer. Standard +/- 10% increments from selected map settings, different ranges are available using the supplied Control Center software.
Users can also load up to 10 of their personally built Power Maps into the Power Commander FC and select between them while in the saddle - eliminating the need to "re-boot" with the computer every time a new map is desired.
This unit does NOT work with any of the Dynojet accessories - SFM, Ignition Module, shifter, LCD.
(1) Power commander fuel controller W/wiring harness
(1) USB to mini USB cable
(4) Velcro strips
(1) Alcohol swab
(1) O2 Sensor bypass (4 pin connector)
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.
Cross reference number(s):10202462
Specs for Dynojet Power Commander Fuel Controller - FC17060
|Type||Fuel Injection Module|
Fitment for Dynojet Power Commander Fuel Controller - FC17060See if this part fits your ride
Part 2009457 fits the following machines
- 2017 Kawasaki EX300A Ninja 300
- 2016 Kawasaki EX300A Ninja 300
- 2015 Kawasaki EX300A Ninja 300
- 2016 Kawasaki EX300A Ninja 300 SE
- 2015 Kawasaki EX300A Ninja 300 SE
- 2017 Kawasaki EX300B Ninja 300 ABS
- 2016 Kawasaki EX300B Ninja 300 ABS
- 2015 Kawasaki EX300B Ninja 300 ABS
- 2015 Kawasaki EX300B Ninja 300 ABS SE