Overview of Dynojet Autotune Kit for Power Vision - AT120
|For use with Power Vision PART NO. 20-00459
NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their sensor bungs.
(1) Auto Tune module
(1) Installation guide
(1) 72"Can-to-Can cable
(1) Y-Adapter cable
(1) CAN Termination plug
(2) 18mm O2 sensors
1) 52" O2 sensor cable
(1) 24" O2 sensor cable
(3) 8" Cable ties
(2) Dual lock velcro
(1) Alcohol swab
(2) O2 sensor bungs
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.
Cross reference number(s):10201534
Specs for Dynojet Autotune Kit for Power Vision - AT120
|Type||Fuel Injection Module|
Fitment for Dynojet Autotune Kit for Power Vision - AT120See if this part fits your ride
Part 2000651 fits the following machines
The most complicated part (for me) about assembly is connecting the wires to the module itself. This is because I'm color-deficient. I had to ask someone to ensure the colors were matching.
You have the option to remove your stock O2 sensors, but, I left both of them in my pipes.
I would recommend this to anyone wanting to get more detailed tuning out of their hog!
AT-110B for all J1850 models with 12mm O2 sensor ports; 18mm O2 bungs included
AT-120 for all CANbus models with 18mm sensor ports; O2 bungs not included
AT-120B for all CANbus models with 12mm sensor ports; 18mm O2 bungs included