Overview of Cycle Electric Stator - CE-6014
It has taken us years of constant upgrading to develop our current line of stators. We start with a higher temperature insulation system capable of withstanding temperatures in excess of 600° F. Others fail at 425° F. This insulation is thinner which allows better heat transfer and better magnetic coupling. We then wind each stator using our precision needle winder. This improves consistency, heat transfer, and magnetic coupling. Better heat transfer means cooler operating temperatures. Better magnetic coupling yields improved output over the entire R.P.M. range. When combined with our top quality plug materials you will not find a stator that can outperform or outlast a Cycle Electric Inc stator.
Stators are listed as supplied on stock models. Sportster models only fit Sportster. Twin cam models only fit twin cams. Most other stators will interchange if proper rotor shimming can be achieved.
Note: When replacing a stator on Evo and Shovel heads compare the plug type to see which system is currently being used. If in doubt replace the complete system as a set. Twin Cam models use the same plug on more than one system so comparing plugs won’t work.
All Cycle Electric Inc. stators are backed by our two-year guarantee
(1) Stator W/wiring
Specs for Cycle Electric Stator - CE-6014
Fitment for Cycle Electric Stator - CE-6014See if this part fits your ride
Part 2010559 fits the following machines
- 2010 Buell 1125CR
- 2009 Buell 1125CR
- 2010 Buell 1125R
- 2009 Buell 1125R
- 2008 Buell 1125R