• Addition of PowerPort headpipe increases overall performance; similar to a 2-into-1 system
• Large 2.5 in., 222 degree, full-length heat shields for a seamless look and no bluing
• Beautiful machined billet end caps produce a great look for your bike
• Best fit and finish exhaust on the market
• Include mounting hardware and removable baffles
• Made in the U.S.A.

NOTE:  For replacement baffle use 44-03618 and for Quiet baffle use 44-02776

Included Items:
(2) Headpipes & Heatshields
(1) Muffler Set
(1) Headpipe support bracket
(2) Muffler tips
(8) Clamps
(1) 1-3/4 in. Pinch clamp
(2) 5/16 x 5/8 in. Hex Bolts
(1) 3/8 in. Carriage bolt w/nut/washer
(2) 1/4 x 3/8 in. Buttonhead bolts
(2) 3/16 in. Spacers

NOTES:
Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information

There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See the CHEMS/LUBES section for products that will help prevent or remove blueing.

Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during. or after, installing their product. If a jet kit or fuel processor is recommended, see the FUEL/INTAKE section

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.