Need Assistance?
Legendary Service... Ask Your Friends - Since 1969
800.969.7501
Over 160K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Cobra Slip-On w/Slash Cut Tip - 2171SC

  • Part #:
    445304
  • Manufacturer Part #:
    2171SC

MSRP Price: $398.95

Our Price: $359.06

You Save:
$39.89 (10%)
2 on Hand

Overview of Cobra Slip-On w/Slash Cut Tip - 2171SC

  • The same craftsmanship and high quality fit, finish and materials as the complete systems
  • Designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands; and that they won't interfere with footpegs, floorboards or any other part of the motorcycle
  • Better sound and style, with larger, longer muffler bodies than the competition
  • Staggered dual, 3 in. diameter mufflers exit on the right-hand side of the motorcycle
  • 3 in. Chrome plated steel muffler bodies are used on the OEM headpipes
  • Baffles are non-removable
  • No re-jetting necessary although it is recommended for best performance

Included Items:
(1) Front Muffler
(1) Rear Muffler
(1) Mounting Bracket Assembly w/hardware
(2) #268-55 T-Bolt Clamps

Note: Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information

Note: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available

Note: Exhaust discoloration (bluing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

Specs for Cobra Slip-On w/Slash Cut Tip - 2171SC

Color - Primary Chrome
Finish Chrome
Style Bologna/Slash-Cut Tip
Type Slip-On/Muffler
Units Pair
Weight 12.50 lbs

Specs for Cobra Slip-On w/Slash Cut Tip - 2171SC

Color - Primary Chrome
Finish Chrome
Style Bologna/Slash-Cut Tip
Type Slip-On/Muffler
Units Pair
Weight 12.50 lbs

Fitment for Cobra Slip-On w/Slash Cut Tip - 2171SC

See if this part fits your ride

Part 445304 fits the following machines

Yamaha
  • 2003 Yamaha XV1600A Road Star
  • 2002 Yamaha XV1600A Road Star
  • 2001 Yamaha XV1600A Road Star
  • 2000 Yamaha XV1600A Road Star
  • 1999 Yamaha XV1600A Road Star
  • 2000 Yamaha XV1600AL Road Star MM Limited Edition
  • 2003 Yamaha XV1600ALE Road Star Silver Edition
  • 2003 Yamaha XV1600AS Road Star Midnight Star
  • 2002 Yamaha XV1600AS Road Star Midnight Star
  • 2001 Yamaha XV1600AS Road Star Midnight Star
  • 2003 Yamaha XV1600AT Road Star Silverado
  • 2002 Yamaha XV1600AT Road Star Silverado
  • 2001 Yamaha XV1600AT Road Star Silverado
  • 2000 Yamaha XV1600AT Road Star Silverado
  • 1999 Yamaha XV1600AT Road Star Silverado
  • 2003 Yamaha XV1600ATLE Road Star Silverado Silver Edition
  • 2006 Yamaha XV1700A Road Star
  • 2005 Yamaha XV1700A Road Star
  • 2004 Yamaha XV1700A Road Star
  • 2007 Yamaha XV1700AM Road Star Midnight
  • 2006 Yamaha XV1700AM Road Star Midnight
  • 2005 Yamaha XV1700AM Road Star Midnight
  • 2004 Yamaha XV1700AM Road Star Midnight
  • 2014 Yamaha XV1700AS Road Star S
  • 2013 Yamaha XV1700AS Road Star S
  • 2012 Yamaha XV1700AS Road Star S
  • 2011 Yamaha XV1700AS Road Star S
  • 2010 Yamaha XV1700AS Road Star S
  • 2009 Yamaha XV1700AS Road Star S
  • 2008 Yamaha XV1700AS Road Star S
  • 2010 Yamaha XV1700AT Road Star Silverado
  • 2009 Yamaha XV1700AT Road Star Silverado
  • 2008 Yamaha XV1700AT Road Star Silverado
  • 2007 Yamaha XV1700AT Road Star Silverado
  • 2006 Yamaha XV1700AT Road Star Silverado
  • 2005 Yamaha XV1700AT Road Star Silverado
  • 2004 Yamaha XV1700AT Road Star Silverado
  • 2007 Yamaha XV1700ATM Road Star Midnight Silverado
  • 2006 Yamaha XV1700ATM Road Star Midnight Silverado
  • 2005 Yamaha XV1700ATM Road Star Midnight Silverado
  • 2004 Yamaha XV1700ATM Road Star Midnight Silverado
  • 2014 Yamaha XV1700ATS Road Star Silverado S
  • 2013 Yamaha XV1700ATS Road Star Silverado S
  • 2012 Yamaha XV1700ATS Road Star Silverado S
  • 2011 Yamaha XV1700ATS Road Star Silverado S
  • 2010 Yamaha XV1700ATS Road Star Silverado S
  • 2009 Yamaha XV1700ATS Road Star Silverado S
  • 2008 Yamaha XV1700ATS Road Star Silverado S
  • 2009 Yamaha XV1700AW Road Star
  • 2008 Yamaha XV1700AW Road Star
  • 2007 Yamaha XV1700AW Road Star
  • 2006 Yamaha XV1700AW Road Star
  • 2005 Yamaha XV1700AW Road Star
4.6 / 5.0
50 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
37
10
2
0
1
Finish
4.7 / 5
Fit
5.0 / 5
Performance
4.6 / 5
Styling
5.0 / 5
Value
1.0 / 5
Loudness
Very Quiet
Average
Very Loud
Would you recommend this product?
No (1)
Finish
5 / 5
Performance
5 / 5
Good Sounding Pipes to Compliment my VTX
I had purchased my Cobra Slip On pipes from Dennis Kirk after having looked at several other pipes. I had concerns that these would not be loud enough since they are slip on pipes, but they are exponentially better than stock pipes and well worth the money.

I really wanted a pipe that not only sounded good, but looked good as well. I had drilled out my stock pipes on my VTX 1300, and while the sound was better than stock, it wasnt anywhere near the level that I heard after installing the Cobras.

Price and ease of installation were considerations in choosing the Cobras and while the directions could have been better, the installation was not hard.

The pipes will rumble quietly when idling through town, but will bark with authority with a twist of the throttle.
May 10, 2010
Finish
5 / 5
Performance
5 / 5
Cobra slash cut tip for a VTX1300R
The clap of thunder exiting out my garage was long over due. Replaced my Honda stock pipes yesterday, what a differnce, I'm seen and heard. Install took a little longer than an hour. Pipes look great, plenty of chrome to compliment this style of bike. The sound is excellent, just enough rumble to drown out the croch rocket next to me.
Dennis Kirk by far has been one of the most prompt wedsites I've ever ordered from. Ordered the pipes on Sunday and received them on Wednesday; just like they promised.
October 28, 2010
Finish
5 / 5
Performance
5 / 5
Great Pipes
Just installed them 2 hours ago and what a difference. Sounds and looks so much better than the stock exhaust. Won't be made fun of at work tomorrow! Installation was very simple and pipes fit perfectly. Put the clamps on backwards so the screw portion was to the inside, left plenty of room to get a wrench in to tighten them. Looks better than with the screw portion to the outside. Great Pipes and great price!
September 27, 2010
Finish
5 / 5
Performance
5 / 5
Great Value, Great Sound
I put these on my VTX1300R and what a HUGE difference from stock. The sound is awesome! A deep rumble when idling but it's not overkill with how loud they are. Now when the throttle is cracked thats a different story. Plenty of sound there to upset the neighbors. It had taken about an hour to remove the stock and put the new ones on. That was taking my time. The nice part is the bike runs better with these on and i do not have to re-jet the carb as with a full exhaust system. I may have got lucky with not haveing to re-jet the carb but that was the case with this bike.
February 9, 2011
Finish
4 / 5
Performance
4 / 5
worthwhile upgrade
installation was a snap,i just wish i would thought of ordering new gaskets with them.lucky i found some local.
chrome looks excellent on the main bodies but the brackets could have been done nicer.painted the inside of the slash cuts with high temp matte black and this added much needed accent/detail.also upgraded to stainless hardware.
they have a nice mellow rumble at a cruise,crack the throttle and they bark real sweet.
i put them on an '07 shadow 1100vtc.
overall very happy.
August 3, 2011
Finish
5 / 5
Performance
5 / 5
Awesome Sound!!
These Cobra Slip Ons Sound Great On My Honda VTX1300R
They Were Easy To Install And For A Good Price. They Fit Perfectly And Look Great On My Bike, But The Sound Is Amazing, Nice Low Rumble When Idle Or At A Cruising Speed, But Open The Throttle And They Roar!
April 19, 2011
legal but loud enough
My honda sadow 1100 did't come with a tachometer. I couldn't hear the engine to know when to shift. The cobra exhaust allowed me to hear the engine and gave a more aggresive sound. I am very pleased with my purchase and would reccomende it to others with stock exchaust.
October 10, 2009
Finish
4 / 5
Performance
5 / 5
Cobra Slip Ons
Fit was good. Installed them on my 2008 1100 V Star. Louder than I expected. Direction were clear, it took a toal of 30 Min to remove stock mufflers and install these. Very happy. 100% improvment over stock, It took a while to get used to how loud they are compared to stock. Its how a V Star is supposed to sound .
September 6, 2010
Finish
5 / 5
Performance
5 / 5
Nice Pipes
I had a pair of Jardine Rumblers that were louder and the baffles were held in with pop rivets, they only lasted 3 years. The baffles are welded into these mufflers and the finish is much better, for $150 less. Sounds great.
May 4, 2011
Finish
5 / 5
Performance
5 / 5
Love these pipes
I installed these mufflers on my 1100 V-star custom. It took only about 30-45 min which included removal of the factory mufflers. The factory mufflers were too bulky and didn't look or sound very good. The cobras give my bike a leaner/meaner appearance. The rumble makes my bike sound a little bigger than an 1100cc. Not too loud but just enough to be noticed and sound good at the same time. Could just be my imagination but I seem to have gained a little pep as well as looks and sound. Very happy!
July 21, 2010
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Can I take baffles out?
Brad w on Apr 15, 2017
BEST ANSWER: Sorry, they cannot be removed. They are welded in. Believe me, you would not want to remove them. These are like having no mufflers at all. I am going to sell my brand new ones that I just bought from Dennis Kirk. They are way to loud for me!

Instructions and Manuals for Cobra Slip-On w/Slash Cut Tip - 2171SC

You May Also Be Interested In