Need Assistance?
Legendary Service... Ask Your Friends - Since 1969
800.969.7501
Over 160K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Cobra Slash-Down Hot Rod Speedster Exhaust - 2826

  • Part #:
    4404100
  • Manufacturer Part #:
    2826

MSRP Price: $671.95

Our Price: $574.88

You Save:
$97.07 (14%)
1 on Hand

Overview of Cobra Slash-Down Hot Rod Speedster Exhaust - 2826

  • Addition of PowerPort headpipe increases overall performance
  • 2 1/2 inch, 222 degree full-length heat shields fit tip-to-tip
  • Beautiful machined billet end caps produces a great look for your bike
  • Best fit and finish exhaust on the market

For replacement baffle use 44-02773 and for quiet baffle use 44-02774


NOTE: System includes oxygen sensor bungs; installed.
Oxygen wiring extender included.

Included Items:
(1) Front headpipe w/heatshield
(1) Rear headpipe W/heatshield
(1) Muffler assembly
(1) Exhaust mounting bracket
(2) Exhaust flanges
(5) #24 Hose clamps
(2) #28 Hose clamps
(2) 27-61 Clamps
(2) 5/16-18x5/8 in. Bolts
(2) 1/4-20x3/8 in. Buttonhead screws
(2) Muffler tips

Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information.

Installation of a new exhaust system may change your motorcycles fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section

Exhaust discoloration (bluing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered by any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

Specs for Cobra Slash-Down Hot Rod Speedster Exhaust - 2826

Color - Primary Chrome
Finish Chrome
Style Bologna/Slash-Cut Tip
Type 2-Into-2 System
Units Each
Weight 40.50 lbs

Cross reference number(s):

18101728

Specs for Cobra Slash-Down Hot Rod Speedster Exhaust - 2826

Color - Primary Chrome
Finish Chrome
Style Bologna/Slash-Cut Tip
Type 2-Into-2 System
Units Each
Weight 40.50 lbs

Fitment for Cobra Slash-Down Hot Rod Speedster Exhaust - 2826

See if this part fits your ride

Part 4404100 fits the following machines

Yamaha
  • 2017 Yamaha XV1900C Raider
  • 2016 Yamaha XV1900C Raider
  • 2015 Yamaha XV1900C Raider
  • 2014 Yamaha XV1900C Raider
  • 2013 Yamaha XV1900C Raider
  • 2012 Yamaha XV1900C Raider
  • 2011 Yamaha XV1900C Raider
  • 2010 Yamaha XV1900C Raider
  • 2009 Yamaha XV1900C Raider
  • 2008 Yamaha XV1900C Raider
  • 2014 Yamaha XV1900C Raider SCL
  • 2013 Yamaha XV1900C Raider SCL
  • 2012 Yamaha XV1900C Raider SCL
  • 2015 Yamaha XV1900CS Raider S
  • 2014 Yamaha XV1900CS Raider S
  • 2013 Yamaha XV1900CS Raider S
  • 2012 Yamaha XV1900CS Raider S
  • 2011 Yamaha XV1900CS Raider S
  • 2010 Yamaha XV1900CS Raider S
  • 2009 Yamaha XV1900CS Raider S
  • 2008 Yamaha XV1900CS Raider S
4.9 / 5.0
33 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
29
4
0
0
0
Finish
4.8 / 5
Performance
4.8 / 5
Loudness
Very Quiet
Average
Very Loud
Finish
5 / 5
Performance
5 / 5
Nice pipes
Installation was quick but I would suggest getting exhaust gaskets at same time just in case old ones are broken during the more difficult task of removing the old exhaust.

Sound is nice and loud with a good low rumble. Very happy. Shipping was quick and arrived on time.
September 12, 2010
Finish
3 / 5
Performance
5 / 5
sweet sound withg a thump
bought in Febuary on a monday delevered thursday installed in my driveway friday in about two hours no rejetting needed for my 2007 vtx1300r wakes the neighbors and lets people hear you comming no baffles sounds the best to me and i ran mine with and without them millage from 37-39 to 37-42 depending how much you make it yell. one of my tips are pitting so I have to call to see how good the support is I will let you know
October 6, 2009
Finish
5 / 5
Performance
5 / 5
KEEP UP THE GREAT WORK KIRK
I installed these pipes on my 2010 Vulcan 2000 Classic LT. They were easy to install , fit like a glove. Look good and sound GREAT! Just what I was looking for. DENNIS KIRK WAS EASY TO DEAL WITH AND PIPES WERE AT MY DOOR IN TWO DAYS. BEST PRICE! HAVE A BLESSED DAY!
March 25, 2011
Finish
5 / 5
Performance
5 / 5
Music to my ears
This exhaust was easy to install for a beginner (me). I followed instruction on the sheet with the exhaust as well as a quick video of an install on a 1300 on youtube. Everything I read said it would take 2.5 to 3 hours. I was able to complete the install of the exhaust in under 2 hours and I wasn't working fast. The sound is like music. It is much louder than stock but not annoying. The rumble is deep and throaty not tinny or hollow and they look so much better then the big cannister stock pipe.
April 17, 2010
Finish
5 / 5
Performance
5 / 5
Awesome pipes
I am very happy with these pipes they completely changed the sound of my bike and made it sound like a motorcycle and less like a two wheeled weed zapper. I would suggest that anyone looking for pipes check these ones out. When I hit the throttle my bike growls with a deep tone!! I am very happy with my purchase
May 17, 2012
Finish
5 / 5
Loudness
Very Quiet
Average
Very Loud
Performance
4 / 5
great pipes for the money
I purchased these pipes to replace another set of after market pipes. install was quick and easy. fit and finish is great. performance now I have no poping when im on the throttle or gearing down. great pipes good price.
April 2, 2011
Finish
5 / 5
Performance
5 / 5
excellant pipe
First let me say this is my first purchase from Dennis Kirk. It was a perfect experience, shipping was great, tech dept. was very helpful.As for the pipes this is my second set of slashdowns on two differnt bikes.My current bike is a Vstar 1100 and the installation and fit was easy and perfect. Once again Cobra's quality was 5 star. They sound amazing at idle with a nice low rumble at high revs, gives it an even bigger bike sound and look awesome if you want a pipe somewhere between shortys and longs. One note for Vstar owners is that if you have an oil re-locator kit the brake fluid relocator bracket that comes with the pipes is of no use. But there are many options you can use to mount it somewhere else i.e. frame or a differnt bracket , its not hard to figure out I mounted mine on the frame down tube by drilling a new hole and self-tapping screw with loc-tight, looks like part of the bike there. If you want a great looking and sounding pipe you can't go wrong with this one.
September 27, 2010
Finish
4 / 5
Performance
5 / 5
Really nice pipes
Install was easy. They look awesome. They are a little louder than I expected with the baffles in, but I'm not complaining. The sound is great. Mileage went from 44mpg to 48mpg. I'm a happy camper!
July 29, 2010
Finish
5 / 5
Performance
5 / 5
A little too loud but great pipes....
Installed on my Vulcan 2000 LT. Love the looks and they installed in about an hour. My only issue is they are pretty loud. Nice rumble at idle and they are fine when you are at speed. But acceleration is pretty noisy. The baffles that come standard are pretty much straight through. I may buy the quiet core baffles to see what happens. It would be nice if they offered these pipes with the different baffles. Overall very happy with the purchase.
June 11, 2012
Finish
5 / 5
Performance
4 / 5
Very happy decission!!!!!!
After looking on sites for pipes for my 09 vulcan 900 classic, I wanted the straight dual pipe look, sound clips and other testomonials. COBRA the way to go,
the pipes where a breeze to install, fit and quality is excellent, and sound awsome, Dennis Kirk a breeze to deal with, fast accurate shipping, right on time and prices that are unbeatable, I have also ordered more items. backrest and windsheild etc. I put Dennis Kirk in my favorites and have already told others to check them out.
March 19, 2011
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Instructions and Manuals for Cobra Slash-Down Hot Rod Speedster Exhaust - 2826

You May Also Be Interested In