Dennis Kirk Inc.
Legendary Service... Ask Your Friends - Since 1969
Need Assistance?
Over 150K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Cobra Black Powerport Header for Dressers - 6252B

  • Part #: 4404991
  • Manufacturer Part #: 6252B
Our Price: $599.95
1 on Hand

Overview of Cobra Black Powerport Header for Dressers - 6252B

  • Dual head pipes with PowerPort crossover provides power boost across entire rpm range
  • Dual pipe styling with 2-into-1 performance; 2.5 in. heat shields
  • Includes oxygen sensor bungs
  • Accepts any OEM style mufflers
  • Made in the U.S.A.

NOTE: Will also fit FLHTCUTG 09 (trikes) if adapter kit 44-05604 is used

Included Items:
(1) Front Headpipe and Heatshield
(1) Rear Headpipe and Heatshield
(1) Crossover Pipe Assembly and Heatshield
(1) Bracket, Front Headpipe Support
(1) Bracket, Crossover Pipe Support
(1) Floorboard Mount Spacer Plate
(1) Clamp, Front Headpipe Support
(9) Clamp, Hose
(2) Clamp
(1) Thick 3/8 in. Washer
(1) Thin 3/8 in. Washer
(1) 3/8 in. x 1 in. Carriage Bolt
(1) 3/8 in. Nylock Nut

NOTES:
Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information

There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (bluing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See the CHEMS/LUBES section for products that will help prevent or remove bluing.

Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or fuel processor is recommended, see the FUEL/INTAKE section

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

Specs for Cobra Black Powerport Header for Dressers - 6252B

Color - Primary Silver
Type - Exhaust - Head Pipes & Mid Pipes Head Pipe
Units Set
Weight 27.85 lbs

Specs for Cobra Black Powerport Header for Dressers - 6252B

Color - Primary Silver
Type - Exhaust - Head Pipes & Mid Pipes Head Pipe
Units Set
Weight 27.85 lbs

Fitment for Cobra Black Powerport Header for Dressers - 6252B

See if this part fits your ride

Part 4404991 fits the following machines

Harley-Davidson
  • 2009 Harley-Davidson Electra Glide Classic - FLHTC
  • 2009 Harley-Davidson Electra Glide Standard - FLHT
  • 2009 Harley-Davidson Electra Glide Ultra Classic - FLHTCU
  • 2009 Harley-Davidson Road Glide - FLTR
  • 2009 Harley-Davidson Road King - FLHR
  • 2009 Harley-Davidson Road King Classic - FLHRC
  • 2009 Harley-Davidson Street Glide - FLHX

Powerport Header for Dressers - 6253

4 out of 17 reviews
Fitment:
Sound:
soft loud
Ears Bleed
Finish:
Performance:


Fitment:
Sound:
soft loud
A Little Loud
Finish:
Performance:

Cobra Powerport pipes on 2015 Road King with 103

The good; Love the look of individual pipes as the connector port is pretty much hidden. The quality of the chrome shields is as good as stock. Installation was straight forward. The reduction in heat from the removal of the Cat. is huge. It's a combination of pipes, mufflers, air filter and tuning but the improvement in lower end torque is the most noticeable change, able to stay in any one gear to a 5 mph lower speed without having to down-shift as often. The bike runs noticeably nicer and smoother now with more pull. The bad; Nothing really bad... When I first installed the pipes I had Harley "Street Cannons" and the reversion noise whenever the throttle was released, even on every calm normal up-shift (never mind heavy deceleration), was LOUD and TERRIBLE. Not sure why that combo sounded so bad. I installed V&H Monster Rounds and that problem went away and it sounds great. So, the usual exhaust system shot-in-the-dark. Only other thing to note is that the pipe to head gaskets they recommended (not included) are a flat style which differs from a more sleeve-like style that the stock pipe tapered ends wedge into. The Cobra pipes have rounded ends that just butt against the flat gasket. That difference initially threw me and had me question if it would all work. It did. Be sure to re-torque the flange bolt nuts on the heads often until they stay tight because mine were loose a few times before staying tight. Bottom Line; Awesome pipes for the money and I would recommend them to you

Review By:

from MA

Was this review helpful to you?


Sound:
soft loud
Loud

AWSOME HEADPIPES

I JUST RECENTLY PURCHASED THE POWER PORT HEAD PIPES FOR MY 2014 ULTRA. EASY TO INSATLL YOURSELF. LOOKS GREAT, SHINEY CHROME, SOUNDS AWSOME, NOT TO LOUD. BUT LOUD ENOUGH TO HEAR AND FEEL THE RUMBLE. HIGHLEY RECOMMENDED!!

Review By:

from PITTSBURGH, PA

Was this review helpful to you?


Fitment:
Sound:
soft loud
Very Loud
Finish:
Performance:

Very good

Overall please with these head pipes. Gave me the extra sound and performance I was looking for. Fit my 2014 CVO Limited using the stock exhaust gaskets. I had to trim the inside muffler flange to get them to slide far enough onto the pipes to mount them but it was minor.

Review By:

from Northern Wisconsin

Was this review helpful to you?


Fitment:
Sound:
soft loud
A Little Loud
Finish:
Performance:

happy with product

Style and performance are great, only 1 problem, nut for the clamp wasn't threaded, otherwise very happy.

Review By:

from wauwatosa, Wisconsin

Was this review helpful to you?


Fitment:
Sound:
soft loud
A Little Loud
Finish:
Performance:

Very impressive

removed the V&H Power Shots because the crossover cover drags the road in hard right turns before the floorboards scrap. These Cobras are an easier install than the V&H, they look just as good and perform the same. They might be slightly louder, deeper but only slightly. So far, they don't scrape in hard right curves.

Was this review helpful to you?


Fitment:
Finish:
Performance:

Great headers

I installed a set today. Great quality at a reasonable price. Other Mrg.. Should note they have some serious competition with Cobra products at half the price. The quality of heet shields was better then stock. Perfect fit on my 2012 FLHX. Thanks Dennis Kirk.

Review By:

from Texas

Was this review helpful to you?


Fitment:
Sound:
soft loud
Loud
Finish:
Performance:

True duals

I studied a lot of different brands and types of pipes before choosing Cobra. I have found these pipes to be not only classy and great looking as well as having just the right sound with the Cobra Triovals attached to them. The power curve increased it seems as well. Fitment went smooth and easy. I also recommend using S.E. gaskts when installing them. Dennis Kirk had the best price and shipment was fast.

Review By:

from Minneapolis,Minnesota

Was this review helpful to you?


Fitment:
Sound:
soft loud
Ears Bleed
Finish:
Performance:

Chrome Powerport Header for Dressers

Great chrome...good fit. You do have to use SE exhaust gaskets with these headers...stock will NOT work. great combo with Tri-Oval mufflers! No CAT!! Finally!

Review By:

from NorCal

Was this review helpful to you?


Instructions and Manuals for Cobra Black Powerport Header for Dressers - 6252B

You May Also Be Interested In