Dennis Kirk Inc.
Search Within
Ride Search
Top 3 Product Matches
  • Cobra
  • FI2000R Plug-In Fuel Processor for Fuel Injected Models Only - 692-1620
Cobra FI2000R Plug-In Fuel Processor for Fuel Injected Models Only - 692-1620
More Choices

Cobra FI2000R Plug-In Fuel Processor for Fuel Injected Models Only - 692-1620

  • Part #:
    202009
  • Manufacturer Part #:
    692-1620

MSRP Price: $249.95

Our Price: $224.96

You Save $24.99 (10%)
1 on Hand
loading...
Make Sure This Fits Your Ride
Low Price GUARANTEE
Find a lower price? Beat it by a buck
NO HASSLE RETURNS
Details
Overview of Cobra FI2000R Plug-In Fuel Processor for Fuel Injected Models Only - 692-1620
  • Proven Fi2000 now comes with more advanced tuning options for modified bikes
  • Step-by-step instructions
  • Clip into fuel-injection and go with leads that snap directly into the bikes injector bodies
  • Open-loop design; eliminates O2 sensors on models that come standard with them
  • Third tuning pot can be thought of as an electronic main jet
  • Air/fuel mixture problems are eliminated along with backfiring when decelerating
  • Ten settings of fuel adjustments (0-10 settings)
  • Three lights offer great identity to each mixture: green -- air/fuel ratio 14:1; green and yellow -- air/fuel mixture 12.5:1; red -- air/fuel mixture 12.8:1
  • Gives a better ride by smoothing out the powerband and throttle response
  • Easy to use with no downloads or map adjustments required

Included Items:
(1) Fi2000R fuel injection module
(3) Five 6" zip ties
(1) velcro strip
(2) Oxygen sensor eliminators

NOTE: Standard models not legal for operation on public highways in the state of California

NOTE: For California XL models 07-13 (except XL 1200V) use Part No. 20-2488

Specs for Cobra FI2000R Plug-In Fuel Processor for Fuel Injected Models Only - 692-1620

Type Fuel Injection Module
Units Each
Weight 0.65 lbs

Alternate/OEM Part Number(s):

10200306
Specs for Cobra FI2000R Plug-In Fuel Processor for Fuel Injected Models Only - 692-1620
Type Fuel Injection Module
Units Each
Weight 0.65 lbs
Fitment for Cobra FI2000R Plug-In Fuel Processor for Fuel Injected Models Only - 692-1620
See if this part fits your ride

Part 202009 fits the following machines

Harley-Davidson
  • 2008 Harley-Davidson Sportster (EFI) - XL 883
  • 2007 Harley-Davidson Sportster (EFI) - XL 883
  • 2007 Harley-Davidson Sportster (EFI) - XL 883R
  • 2013 Harley-Davidson Sportster Custom - XL 1200C
  • 2012 Harley-Davidson Sportster Custom - XL 1200C
  • 2011 Harley-Davidson Sportster Custom - XL 1200C
  • 2010 Harley-Davidson Sportster Custom - XL 1200C
  • 2009 Harley-Davidson Sportster Custom - XL 1200C
  • 2009 Harley-Davidson Sportster Custom - XL 883C
  • 2008 Harley-Davidson Sportster Custom (EFI) - XL 1200C
  • 2007 Harley-Davidson Sportster Custom (EFI) - XL 1200C
  • 2008 Harley-Davidson Sportster Custom (EFI) - XL 883C
  • 2007 Harley-Davidson Sportster Custom (EFI) - XL 883C
  • 2013 Harley-Davidson Sportster Forty-Eight - XL 1200X
  • 2012 Harley-Davidson Sportster Forty-Eight - XL 1200X
  • 2011 Harley-Davidson Sportster Forty-Eight - XL 1200X
  • 2010 Harley-Davidson Sportster Forty-Eight - XL 1200X
  • 2013 Harley-Davidson Sportster Iron - XL 883N
  • 2012 Harley-Davidson Sportster Iron - XL 883N
  • 2011 Harley-Davidson Sportster Iron - XL 883N
  • 2010 Harley-Davidson Sportster Iron - XL 883N
  • 2009 Harley-Davidson Sportster Iron - XL 883N
  • 2011 Harley-Davidson Sportster Low - XL 1200L
  • 2010 Harley-Davidson Sportster Low - XL 1200L
  • 2009 Harley-Davidson Sportster Low - XL 1200L
  • 2010 Harley-Davidson Sportster Low - XL 883L
  • 2009 Harley-Davidson Sportster Low - XL 883L
  • 2008 Harley-Davidson Sportster Low (EFI) - XL 1200L
  • 2007 Harley-Davidson Sportster Low (EFI) - XL 1200L
  • 2008 Harley-Davidson Sportster Low (EFI) - XL 883L
  • 2007 Harley-Davidson Sportster Low (EFI) - XL 883L
  • 2012 Harley-Davidson Sportster Nightster - XL 1200N
  • 2011 Harley-Davidson Sportster Nightster - XL 1200N
  • 2010 Harley-Davidson Sportster Nightster - XL 1200N
  • 2009 Harley-Davidson Sportster Nightster - XL 1200N
  • 2008 Harley-Davidson Sportster Nightster (EFI) - XL 1200N
  • 2007 Harley-Davidson Sportster Nightster (EFI) - XL 1200N
  • 2008 Harley-Davidson Sportster Roadster (EFI) - XL 1200R
  • 2007 Harley-Davidson Sportster Roadster (EFI) - XL 1200R
  • 2013 Harley-Davidson Sportster Seventy Two - XL 1200V
  • 2012 Harley-Davidson Sportster Seventy Two - XL 1200V
  • 2013 Harley-Davidson Sportster Superlow - XL 883L
  • 2012 Harley-Davidson Sportster Superlow - XL 883L
  • 2011 Harley-Davidson Sportster Superlow - XL 883L
Powered by TurnTo
4.7 / 5.0
7 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
6
0
1
0
0
Fit
4.3 / 5
Quality
4.6 / 5
Style
4.6 / 5
Value
4.9 / 5
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Cobra FI2000R- GOOD VALUE
This product is a must when you put a 2 into 1 exhaust on your bike. If you follow the instructions, the installation is easy. If you don't remove the tank, it takes a little longer to remove the injection clips if you have large hands. The tuning instructions are simple to follow.
August 9, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
FI200R Tripot Plug In Fuel Processor
Took approximately 2 hours to install.
I recently installed a set of cobra pipes on my bike, replacing drag pipes. I was experiencing a lot of backfire when down shifting or decelerating.
I was not sure what to expect from this unit. I had already made up my mind if I did not see noticeable improvement, I was going to return the unit immediately.
After installation, I fired my Road King up and headed for the interstate. As the add states, it virtually eliminated backfiring. I even notice an improvement in top in cruising. I'm glad I made the decision to try it out!
June 16, 2011
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
definitely worth the money!
It was very easy to install,however getting the settings for my bikes mods took a little while of trial an error.The only thing I would change is in the installation instructions. When you first test the unit all the LEDS only come on for the amount of time the fuel pump pressurize then they go off, and you can start your bike.The way the instructions are written they make it seem the should stay on longer until you start your engine . Other than that I am very happy with the unit and the way my bike runs now.
March 1, 2012
Fit
3 / 5
Quality
4 / 5
Style
4 / 5
Value
5 / 5
easy setup
took about 1.5 hours to install. on quick test drive has smoother pickup. I rode 300 mile today.no pinging and smooth exceleration. did not see fuel millage drop.
December 13, 2015
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
great item
Give your self time to install(1 to 2 hrs) and your good.This is realy cool because if you change something on the bike you can adjust for it. Ihave done afew roadside adjustments and its great!!
September 6, 2010
Fit
4 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Cost Effective Option
I needed to get a fuel processor since I changed both my carburetor cover and my exhaust system, but I didn't want to spend an arm and leg to do it. The Comet 2000 is a good fit for me. for my 2001 Road King w Delphi Fi. Installation wasn't too difficult, it took me about three hours and I'm only a shade-tree mechanic at best.

The key to installing this device is to have the necessary tools. I used two long handled slotted screwdrivers and a long needle nose pliers to remove and then reset the fuel injector electrodes. Loosening the fuel tank's three screws and removing them will help facilitate lifting the tank up two inches so that you can get at the injector electrodes it also helps if most of the gas is out of the tank making it lighter to lift up. You need to approach the injector connectors from the right side of the bike. It will be easier if you remove your breather cover and filter first. Removing the OEM connectors requires that you push in the wire bales at the top of the connector while pushing up on the connector to slide it off. The rear connector is not a problem, the front is more difficult since the bale is pointed at an angle away from you. I found that using a long blade screwdriver to push in on the bale helps out a lot. Using the other long blade screwdriver to push up on the connector at the same time helps great too.

Two things you need to keep in mind when assembling the wires and the device. Keep all the wires away from hot spots by using the supplied bands, especially at the cylinder heads and the rear exhaust manifold where the wires head under the seat for placement, and second, when you life up your tank you might pull your starter switch connector out of its place causing loss of electrical power. This will require you to remove your dashboard and check the connector to your start/off/light switch.

Once the Comet is connected and and you have set the three pots to the correct settings, you'll find your bike will run a lot smoother and you won't have any backfires when you power-down in gear. I haven't had it long enough to see any differences in fuel milage.

With the three pot setting screws instead of the automatic setting of the more expensive units, you are saving significant money. I personally think that using this Comet model is worth the savings.

The control unit is not water proof or even water resistant. I would be very careful using high pressure hoses to wash your chariot. Placing the device in a plastic bag may not be a bad idea. That is one reason why I gave it only 4 stars on fit and finish.
April 3, 2012
Fit
3 / 5
Quality
3 / 5
Style
3 / 5
Value
4 / 5
No Review Title Entered By User
No Review Text Entered By User
November 7, 2011
Powered by TurnTo
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Why is My fuel gauge is acting strange?
A shopper on Sep 4, 2017
BEST ANSWER: Don't know, wiring? sending unit? float?
my check engine light comes on and stay on, took the oxygen eliminator out light stays on for a while then goes off ? cobra 692-1620 on 2009 xln 1200
*Hogg* on Jun 1, 2017
BEST ANSWER: You may want to contact Cobra for troubleshooting
Instructions and Manuals for Cobra FI2000R Plug-In Fuel Processor for Fuel Injected Models Only - 692-1620
Instruction Manual Instruction Manual PDF 258.7 KiB

You May Also Be Interested In