Need Assistance?
Legendary Service... Ask Your Friends - Since 1969
800.969.7501
Over 160K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Cobra Fi2000R Tripot Fuel Processor - 92-1968

  • Part #:
    201606
  • Manufacturer Part #:
    92-1968

MSRP Price: $239.95

Our Price: $169.88

You Save:
$70.07 (29%)
5 on Hand

Overview of Cobra Fi2000R Tripot Fuel Processor - 92-1968

  • Proven Fi2000 now comes with more advanced tuning options for modified bikes
  • Step-by-step instructions
  • Clip into fuel-injection and go with leads that snap directly into the bikes injector bodies
  • Third tuning pot can be thought of as an electronic main jet
  • Air/fuel mixture problems are eliminated along with backfiring when decelerating
  • Ten settings of fuel adjustments (0-10 settings)
  • Three lights offer great identity to each mixture; green -- air/fuel ratio 14:1; green and yellow -- air/fuel mixture 12.5:1; red -- air/fuel mixture 12.8:1
  • Gives a better ride by smoothing out the powerband and throttle response
  • Easy to use with no downloads or map adjustments required

NOTE: Standard models not legal for operation on public highways in the state of California, for those use Part NO. 20-8536

Included Items:
(1 Fi2000R fuel injection module
(1) 6 in. 18# test zip tie
(1) Velcro stripe
(1) Instruction sheet

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

Specs for Cobra Fi2000R Tripot Fuel Processor - 92-1968

Type Fuel Management
Units Each
Weight 0.50 lbs

Specs for Cobra Fi2000R Tripot Fuel Processor - 92-1968

Type Fuel Management
Units Each
Weight 0.50 lbs

Fitment for Cobra Fi2000R Tripot Fuel Processor - 92-1968

See if this part fits your ride

Part 201606 fits the following machines

Kawasaki
  • 2017 Kawasaki VN900B Vulcan Classic
  • 2016 Kawasaki VN900B Vulcan Classic
  • 2015 Kawasaki VN900B Vulcan Classic
  • 2014 Kawasaki VN900B Vulcan Classic
  • 2013 Kawasaki VN900B Vulcan Classic
  • 2012 Kawasaki VN900B Vulcan Classic
  • 2011 Kawasaki VN900B Vulcan Classic
  • 2010 Kawasaki VN900B Vulcan Classic
  • 2009 Kawasaki VN900B Vulcan Classic
  • 2008 Kawasaki VN900B Vulcan Classic
  • 2007 Kawasaki VN900B Vulcan Classic
  • 2006 Kawasaki VN900B Vulcan Classic
  • 2017 Kawasaki VN900C Vulcan Custom
  • 2016 Kawasaki VN900C Vulcan Custom
  • 2015 Kawasaki VN900C Vulcan Custom
  • 2012 Kawasaki VN900C Vulcan Custom
  • 2011 Kawasaki VN900C Vulcan Custom
  • 2010 Kawasaki VN900C Vulcan Custom
  • 2009 Kawasaki VN900C Vulcan Custom
  • 2008 Kawasaki VN900C Vulcan Custom
  • 2007 Kawasaki VN900C Vulcan Custom
  • 2014 Kawasaki VN900C-A Vulcan Custom
  • 2013 Kawasaki VN900C-A Vulcan Custom
  • 2012 Kawasaki VN900C-A Vulcan Custom
  • 2011 Kawasaki VN900C-A Vulcan Custom Special Edition
  • 2017 Kawasaki VN900D Vulcan Classic LT
  • 2016 Kawasaki VN900D Vulcan Classic LT
  • 2015 Kawasaki VN900D Vulcan Classic LT
  • 2014 Kawasaki VN900D Vulcan Classic LT
  • 2013 Kawasaki VN900D Vulcan Classic LT
  • 2012 Kawasaki VN900D Vulcan Classic LT
  • 2011 Kawasaki VN900D Vulcan Classic LT
  • 2010 Kawasaki VN900D Vulcan Classic LT
  • 2009 Kawasaki VN900D Vulcan Classic LT
  • 2008 Kawasaki VN900D Vulcan Classic LT
  • 2007 Kawasaki VN900D Vulcan Classic LT
  • 2006 Kawasaki VN900D Vulcan Classic LT
4.6 / 5.0
40 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
29
7
3
0
1
Finish
4.2 / 5
Fit
4.7 / 5
Quality
4.6 / 5
Style
4.7 / 5
Value
4.6 / 5
Would you recommend this product?
Yes (4)
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
No regrets
I was changing the pipes out on my 08 Roadstar Warrior and thought I'd do the Intake and add a module without spending a fortune. This module did the trick, I installed some Cobra Speedster Swepts and this FI2000R at the same time. The FI2000R is ridiculously easy to install and operate. For my application it was literally ten minutes to install, Im glad cause I was really concerned with the install as I"m not the most experienced in working on bikes. Literally took off the seat and two bolts, then plug it in and put the seat back on. Bikes sounds great, runs great. Adjusting it to your needs is easy as turning a screw. I wasn't looking to do dyno's or to get every ounce of HP out of the bike, it's a warrior it's already fast! I would highly recommend this fuel module. Cobra did it right!
July 21, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
On target
After looking at nearly every product available I finally went with the Cobra Fi2000R for my 08 Kawasaki Vulcan 900C and am I ever satisfied. From the ease of installment to the performance my bike delivers down to the final cost of the product I am overwheming satisfied. Thank You Dennis Kirk for the super cost value and fast delivery.
March 31, 2012
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Fi2000R Tripot Fuel Processor
The fuel processor was easy to install on my 08 Vulcan 900LT. The instructions were easy to understand too. This item is a must if you install a new exhaust system. It's preset for my bike and really is plug and play. I'm very pleased with my purchase.
July 17, 2013
Fit
4 / 5
Quality
4 / 5
Style
4 / 5
Value
5 / 5
Required to run right!
After installing Cobra Speedster Shorts onto my 08 Mean Streak, I rode about 100 miles before installing the FI2000R. The difference once the FI2000R was installed was a dramatic improvement. It smoothed out the engine at all rev levels, and eliminated backfiring. Still working to find the very best setting, but since the changes are simple turns with an eyeglass screwdriver followed by a test ride, it is easy enough. Installation was moderately difficult, primarily due to tight spaces and tricky electrical connections on the bike to get the tank off. Connecting the FI2000R once the tank was off was a snap. Overall, if you change pipes, this is a must have. With a second set of (small, strong) hands, installation is pretty straightforward. The hour and a half of my time was worth the $250 the dealer wanted to install it.
October 3, 2012
Fit
4 / 5
Quality
4 / 5
Style
4 / 5
Value
4 / 5
Good purchase
I put this on my 2007 Vulcan 900, it seemed to improve my throttle response and a little quicker on take off.
Easy to install.
May 7, 2010
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Worth it!!
This fixed the backfiring on my 2014 Vulcan 900. (I also did the marble mod. ) I have V&H pipes and K&N drop-in filter with modified air box. I bumped each number up 1 from factory settings and it runs better. Quicker throttle response. Worth the money and easy to install. No maps hassle.
September 21, 2017
Purchased
2 weeks ago
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
No Decel Popping after quick install of Fi200R
After installing after market Cobra pipes on my Honda VTX 1800R I had decel popping that drove me nuts. I installed the Fi2000R in about 30 minutes. With the preset settings the bike now runs great without any pop.
March 24, 2011
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
No Review Title Entered By User
Great product! Easy to understand instructions and super simple to use.
February 21, 2011
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Fi2000R Tripot Fuel Processor
An extremely east install; plug and play at it's best! As long as you're familiar with the component layout of your bike, it won't be a problem. I will say that the instructions black and white photo figures could be a little larger to better illustrate. That said, was a piece of cake. I had no need to fiddle with the preset pots, as soon as I fired her up and tested her out, it just felt right! Beautiful piece of equipment from cobra that does what they say! Instant performance improvement with my Vance & Hines pipes and Arlen Ness Big Air Sucker. Excellent!!
September 12, 2012
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
No Review Title Entered By User
No Review Text Entered By User
July 20, 2010
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 4 answers
Does this unit work with any brand air filter and aftermarket exhaust?
A shopper on Mar 31, 2017
BEST ANSWER: I am using it with the Stock air box and a K&N air filter. The device is tunable so if you add higher airflow, you can add more fuel. So, yes, it would work with any aftermarket air intake system.

Instructions and Manuals for Cobra Fi2000R Tripot Fuel Processor - 92-1968

You May Also Be Interested In