Need Assistance?
Legendary Service... Ask Your Friends - Since 1969
800.969.7501
Over 160K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Cobra Fi2000R Tripot Fuel Processor - 92-1845

  • Part #:
    201610
  • Manufacturer Part #:
    92-1845

MSRP Price: $239.95

Our Price: $169.88

You Save:
$70.07 (29%)

Overview of Cobra Fi2000R Tripot Fuel Processor - 92-1845

  • Proven Fi2000R comes with leads that snap directly into the bike's injector bodies
  • Can be used with any exhaust system on the market today
  • More advanced tuning for modified bikes
  • Think of third tuning pot as an electronic main jet while thinking of the entire Fi2000R as a digital jet kit
  • Full range of fuel adjustment (0-10 settings) across all rpm ranges
  • Three easily identifiable lights: Green -- Fi2000 is adding more fuel to the air/fuel ratio approximately. 14:1; Green and yellow lights -- these lights will be on in unison when throttle is open more quickly and air/fuel mixture is approx. 12.5:1; Red -- light comes on and stays on as long as the Fi200 follows the fuel curve while adjusting to approximately 12.8:1 air/fuel ratio, which is where the engine will produce its best full-throttle power
  • Step-by-step instructions
  • Improves rideability by smoothing out the powerband and giving the bike more throttle response
  • Corrects lean air/fuel mixture problems; eliminates overheating, backfiring on deceleration, hesitation on acceleration or an uneven cruising rpm
  • Clip into fuel injection and go
  • No fuel map adjustments or computer downloads required


  • NOTE: Standard models not legal for operation on public highways in the state of California, for those use Part NO. 20-8530

Included Items:
1-Fi2000R fuel injection module
1-6in #18 zip tie
1-Velcro strip

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

Specs for Cobra Fi2000R Tripot Fuel Processor - 92-1845

Type Fuel Management
Units Each
Weight 0.50 lbs

Specs for Cobra Fi2000R Tripot Fuel Processor - 92-1845

Type Fuel Management
Units Each
Weight 0.50 lbs

Fitment for Cobra Fi2000R Tripot Fuel Processor - 92-1845

See if this part fits your ride

Part 201610 fits the following machines

Suzuki
  • 2014 Suzuki VZR1800 Boulevard M109R
  • 2013 Suzuki VZR1800 Boulevard M109R
  • 2012 Suzuki VZR1800 Boulevard M109R
  • 2011 Suzuki VZR1800 Boulevard M109R
  • 2009 Suzuki VZR1800 Boulevard M109R
  • 2008 Suzuki VZR1800 Boulevard M109R
  • 2007 Suzuki VZR1800 Boulevard M109R
  • 2006 Suzuki VZR1800 Boulevard M109R
  • 2009 Suzuki VZR1800N Boulevard M109R2
  • 2008 Suzuki VZR1800N Boulevard M109R2
  • 2017 Suzuki VZR1800N Boulevard M109RB B.O.S.S.
  • 2016 Suzuki VZR1800N Boulevard M109RB B.O.S.S.
  • 2015 Suzuki VZR1800N Boulevard M109RB B.O.S.S.
  • 2014 Suzuki VZR1800N Boulevard M109RB B.O.S.S.
  • 2014 Suzuki VZR1800Z Boulevard M109RZ Limited
  • 2013 Suzuki VZR1800Z Boulevard M109RZ Limited
  • 2012 Suzuki VZR1800Z Boulevard M109RZ Limited
  • 2011 Suzuki VZR1800Z Boulevard M109RZ Limited
  • 2009 Suzuki VZR1800Z Boulevard M109RZ Limited
  • 2008 Suzuki VZR1800Z Boulevard M109RZ Limited
  • 2007 Suzuki VZR1800Z Boulevard M109RZ Limited
4.6 / 5.0
38 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
29
5
2
0
2
Finish
4.5 / 5
Fit
4.6 / 5
Quality
4.5 / 5
Style
4.7 / 5
Value
4.6 / 5
Would you recommend this product?
Yes (1)
No (1)
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
No regrets
I was changing the pipes out on my 08 Roadstar Warrior and thought I'd do the Intake and add a module without spending a fortune. This module did the trick, I installed some Cobra Speedster Swepts and this FI2000R at the same time. The FI2000R is ridiculously easy to install and operate. For my application it was literally ten minutes to install, Im glad cause I was really concerned with the install as I"m not the most experienced in working on bikes. Literally took off the seat and two bolts, then plug it in and put the seat back on. Bikes sounds great, runs great. Adjusting it to your needs is easy as turning a screw. I wasn't looking to do dyno's or to get every ounce of HP out of the bike, it's a warrior it's already fast! I would highly recommend this fuel module. Cobra did it right!
July 21, 2010
Fit
4 / 5
Quality
4 / 5
Style
4 / 5
Value
5 / 5
Required to run right!
After installing Cobra Speedster Shorts onto my 08 Mean Streak, I rode about 100 miles before installing the FI2000R. The difference once the FI2000R was installed was a dramatic improvement. It smoothed out the engine at all rev levels, and eliminated backfiring. Still working to find the very best setting, but since the changes are simple turns with an eyeglass screwdriver followed by a test ride, it is easy enough. Installation was moderately difficult, primarily due to tight spaces and tricky electrical connections on the bike to get the tank off. Connecting the FI2000R once the tank was off was a snap. Overall, if you change pipes, this is a must have. With a second set of (small, strong) hands, installation is pretty straightforward. The hour and a half of my time was worth the $250 the dealer wanted to install it.
October 3, 2012
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Fi2000R Tripot Fuel Processor
An extremely east install; plug and play at it's best! As long as you're familiar with the component layout of your bike, it won't be a problem. I will say that the instructions black and white photo figures could be a little larger to better illustrate. That said, was a piece of cake. I had no need to fiddle with the preset pots, as soon as I fired her up and tested her out, it just felt right! Beautiful piece of equipment from cobra that does what they say! Instant performance improvement with my Vance & Hines pipes and Arlen Ness Big Air Sucker. Excellent!!
September 12, 2012
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
No Decel Popping after quick install of Fi200R
After installing after market Cobra pipes on my Honda VTX 1800R I had decel popping that drove me nuts. I installed the Fi2000R in about 30 minutes. With the preset settings the bike now runs great without any pop.
March 24, 2011
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
No Review Title Entered By User
Great product! Easy to understand instructions and super simple to use.
February 21, 2011
Fit
1 / 5
Quality
1 / 5
Style
3 / 5
Value
1 / 5
horrible purchase
I installed this on my Honda VTX 1800. I test rode the bike and could tell little to no difference. I took a ride that was two states away. I logged a lot of miles in a few days. I started noticing a small popping noise in my front pipe. I went start riding again that evening and it would not start back. I had to get my bike hauled back home. When I inspected the fi2000 is showed to be working. I then unplugged it and plugged everything back to original specks and the bike started working again. I would not purchase this item unless you pack a lot of tools with you.
August 7, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
A Must Have!
Called several cycle shops, all hands down recommended the Fi2000 Fuel Processor! The only one that didnt was Harley- go fiqure. They wanted to sell me a screamin eagle race tuner and dyno it, at $700.00. This unit makes race tuners and dyno's a thing of the past!! I noticed the difference immediately on my stock 2011 110 CVO, And it only gets better because you dont touch it no matter what modifications you make. The spark plugs look nice and brown like there supposed to, not all leaned out like the factory sets the fuel management. Dont wait put this unit on, I believe it will add more miles to the motor not running it so hot.
February 22, 2012
Fit
4 / 5
Quality
4 / 5
Style
4 / 5
Value
5 / 5
good bang for buck.
installed in less then an hour on 07 c50. very easy to install. didnt notice much performance gain but runs much smoother. my bike has all baffels and plates removed from stock pipes.
April 26, 2011
Fit
5 / 5
Quality
4 / 5
Style
5 / 5
Value
5 / 5
Cobra Fi2000R for 2007 Vulcan 2000
The unit was smaller then I thought it would be, which made it easier to fit under the seat. Good and accurate directions for installation. Nice plug and play product that was easy to install. It was a bit of work removing the Tank of the Vulcan 2000, but the directions explained the process thoroughly. I am using it on my Vulcan 2000 with Freedom Sharp Curve Exhaust and a Barron Big Air kit. I requested support from Cobra as to the recommended setting and have not heard back yet. I had intended to bring it to a shop and have it setup on the Dino. Overall I am pleased with the look and fit of the unit and hopefully will be just as pleased with the performance.
November 26, 2011
Fit
5 / 5
Quality
5 / 5
Style
4 / 5
Value
5 / 5
Great part
I have a 2005 1500 Vulcan Classic. Put on Cobra drag pipes and a K&N Air system. Ran my bike for a couple of days before the processor came in. pretty slugish. when I got the processor it was easy to install and made a big difference in the way the bike ran. More pick-up than the bike has ever had. Highway throttle is even better. Plus improved my gas mileage. Great part and price.
August 29, 2012
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Why is Cobra Fi200R, part no. 92-1845 is called Tripot? I have understood that Cobra Tripot has a different part no. 92-0845 and uses t-tap connectors
Harri L on Jan 24, 2017
BEST ANSWER: They are both a tripot system the only difference is one is plug and play and the other uses t-tap connectors

Instructions and Manuals for Cobra Fi2000R Tripot Fuel Processor - 92-1845

You May Also Be Interested In