Overview of Camoplast 1.25 in. Lug Ice Ripper XT Pre-Studded Ice Tech Track - 9079H
- Studs are placed in precise locations of the lugs for the ultimate traction on any surface
- Designed to keep the driver safe and secure
- Ice Ripper tracks are the same as the Ice Claw with a little something extra
- Designed for ultimate traction, performance for all conditions
DRIVE No.: 54
DRIVE PITCH: 2.52 in.
LUG HEIGHT: 1.250 in.
WEIGHT: 44 lb.
CLIP CONFIGURATION/NOTES: Fully, sharp stud
RECOMMENDED USE: Trail/Snocross/Cross Country
Width: 15 in.
Length: 136 in.
Pitch x Quantity: 2.52 in. x 54
Slide Center Distance: 8.875 in.
Drive Hole Size: 1 in. x 1.50 in.
Lug Height: 1.25
Before ordering, check the height of your track lugs and order the matching height listed for your machine. Whenever ordering an optional taller-lug track, you must check for bulkhead, tunnel and heat exchanger clearance. The applications listed is for the track to fit the suspension and be the same length as original equipment only - it is your responsibility to ensure there is sufficient clearance.
Specs for Camoplast 1.25 in. Lug Ice Ripper XT Pre-Studded Ice Tech Track - 9079H
|Length - Track
Alternate/OEM Part Number(s):