Dimpled tread pattern with many edges to maximize traction
Self-cleaning tread blocks for traction in mud and loose terrain
Sidewall ID Information; Trailwing 22 130/80-17 M/C 65S
Dimensions: Inflated Width /Measuring Rim Width: 5.00 in./3.00 in.
Inflated Diameter: 25.5 in.
Acceptable Rim Width(s): 3.00 in.
Deepest Tread Depth: 10/32 in.
Speed Rating: S Rated up to 112 MPH
Directional Arrow: Yes
Capacities and Construction: Load Capacity/Inflation Pressure: 640 lbs/36 PSI
Tread Plies/Material: 3 Nylon
Sidewall Plies/Material: 3 Nylon
DOT approved for Road Use: Yes
Tube or Tubeless: Tube Type
NOTE: A new tube and rim strip is recommended with every new tire
i installled this tire on a klr 650, to replace the rear factory dunlop tire. i was disappointed with the dunlops wear, i had only 4000 miles on the bike and the tire was wore out. i ride this bike on country roads and highways and hardly off road . after looking at alot of replacement tires i settled on this trailwing because of the tread pattern that looked like it could handle the dirt and the highways. this tire is a good performer, it handles the dirt very well and the pavement equaly. i was impressed also by the way it changed the ride quality of my bike when riding in the wind. i never liked riding the klr in the high winds we get here in kansas, but with this tire on the rear it made my bike alot more safe to ride in the wind.
Installed on Moto Guzzi Jackal for Sturgis , came the next day after ordering . Riding blacktop or gravel tire worked well . Positive grip and good cornering on both good roads and country roads , held well in loose gravel and gave positive feel.