We'll admit the stock AXYS has good clutching to begin with compared to other models. However, there is still room for improvement! When testing we notice this sled liked to be loaded hard with the stock configuration. Knowing this, we put together the right combination for a stock or modified machine.
You will notice great acceleration gains and much better track speed in the deep powder.
The lightning quick backshift is probably the thing about this kit.
When you let off the throttle, then get back into it, the power is right on top.
The kit offers slightly higher engagement without getting too crazy.
Easily adjustable primary weights allow you to tune for almost any riding style or modifications.
A setup sheet is provided that lists all setups we have for your machine (ex. stock, pipe, full bolt-on kit).
Kits includes custom cut helix, secondary spring, Delrin washer, Goldstar magnetic adjustable weights and primary spring. Low alt= 0-3000ft, mid alt= 3000-6000ft, high alt= 6000+ft.
(1) Aluminum helix
(2) Teflon washers
(1) Primary spring
(1) Secondary spring
(3) 58-80 gram Weights
(48) Magnetic weights
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.