You May Also Be Interested In
Part #: 264183 Mfg Part #: 22899Other People Bought
Part #: H26359 Mfg Part #: 17048-98Other People Bought
4 in. megaphone with billet end cap and 2-1/4 in. performance baffle (part no. 4405335)
3 in. slash-cut with standard 2 in. baffle (part no. 4405337)
3 in. slant-cut with standard 2 in. baffles (part no. 4405338)
3 in. fishtail with standard 2 in. baffle (part no. 4405336)
NOTE: Will not fit models with ABS
NOTE: Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information.
(1) Front head pipe heat shield
(1) Rear head pipe heat shield
(1) Front pipe left side heat shield
(1) Front Head pipe
(1) Rear head pipe
(1) Front left side heat pipe
(3) T-Bolt clamps
(4) 3/8-16 x 1 in. Hexhead bolts
(4) 3/8 in. Flat washers
(7) 24mm Heat shield clamps
(4) 5/16-18 x 1 in. Hexhead bolts
(4) 5/16 in. Flat washers
(2) 02 Sensor plugs
(4) 5/16-18 Flange nuts
(4) 3/8 in. Lock washers
(2) Mounting brackets
There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (bluing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See the CHEMS/LUBES section for products that will help prevent or remove bluing.
Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or fuel processor is recommended, see the FUEL/INTAKE section.
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.
|Color - Primary||Silver|
Part 4404919 fits the following machines