Please note: Customer determines position based on size specs
Replacement steel wheels for many ATV applications
High-quality wheels, reasonable prices
Tough silver finish
Large Bell Design
The OEM Tire Size No.s is: 22 x 11-10
NOTE: Lug nuts and center caps are sold separately
Aftermarket wheels are not exact matches for OEM wheels. This wheel is specified for every model that it will bolt onto, regardless of the original wheel's width, diameter, offset and other specifications. It is your responsibility to determine whether it has similar specifications to your original wheel or not, and whether a tire size change is necessary when fitting it
When changing wheel offset, width, diameter or tire size from the original, you must check clearance for the brakes, a-arms, fenders and any other items that the wheel or tire may interfere with before mounting a tire on the wheel or the assembly to your ATV. If the replacement wheel's offset does not match the original exactly, it is better to have less offset in and more offset out to eliminate possible clearance issues
For additional information, including your original wheel sizes and offset, refer to our printed catalog or contact us
I put these wheels on a 1997 Honda Recon and they worked well. Just two comments, the Lug nuts that come on the Recon are acorn style and the wheel lug seats are just flat steel. I went ahead and used the acorn lug nuts but wonder if this will not be a problem long term and maybe have to find the flat lug nut that will work so that the seated area is larger.
The other thing I notice is the offset sets the wheel out side the fenders just about a inch wider then the stock wheel which I did not know when I ordered them ( this may be my fault) but I like it better then stock and should make the Recon more stable. Overall these wheels are a good value and served my needs well.
I purchased these wheels for a 1983 Honda ATC 200e. The site said they were an exact match. WRONG! The bolt pattern is 4/150 as stated but the center cutout will not fit stock ATC rear hub protrusion without modification. They will not fit the front axle at all because of the offset.