• Includes an S&S Super E gas carburetor and S&S teardrop air cleaner assembly
• Super E has a 1-7/8" throat at the butterfly and a 1-9/16" venturi and is recommended for use on Big Twin or Sportster engines up to 100-cubic-inch
• Manifold and mounting hardware not included; must be purchased separately

FITMENT: For 1936-84 Big Twin, 1957-85 XL models w/standard tank

 NOTE: S&S Super E carburetors require the use of a two-cable, pull open/pull close throttle assembly.

IMPORTANT NOTE: Recommended for racing only, this carburetor is not legal for use in California on motor vehicles operated on public highways or in other states where similar pollution laws may apply. User must determine the suitability of the product for his or her use and assumes all risk and liability in connection therewith.

NOTE: 36-65 Models will required a 1" spacer block to clear external oil line (sold separately).

(1) Aluminum air cleaner backing plate

(1) Air filter

(1) Chrome aluminum teardrop air cleaner cover

(1) Stainless steel fast idle bracket

(2) 10mm-1 Set screws

(1) 5/16"-18 X 1-1/4" Hex head bolt

(1) 5/16"-18 X 1" Hex head bolt

(1) 5/16"-18 X 5/8" Hex head bolt

(3) 1/4"-20 X 3/4" Countersunk philips head bolts

(3) 1/4"-20 X 1/2" Socket head bolts

(2) #10-24 X 1/4" Pan head bolts

(1) 5/16"-18 Nylock nut

(1) 5/16" Wave washer

(2) 5/16" Split lock washers

(1) .322" X .625" X .033" Washer

(1) .338" X .690" X .064" Washer

(1) .343" X .689" X .113" Washer 

(2) 5/16" Nylon washers

(1) Brass fast idle washer

(1) Super E carburetor assembly

(1) 12-1/4" Flex tubing

(1) 17" Fuel injection hose W/5/16" ID

(1) 23-1/2" Rubber hose W/1/8" ID

(1) Stainless steel throttle cable guide

(1) #10-24 X 1/4" Flat head bolt

(2) .325" X 1" X .125" Shims

(1) O-ring

(2) 5/8" Hose clamps

(2) 3/8"-16 X 1-1/4" Socket head bolts

(1) Insulator block

(1) Backplate gasket

(1) #66 Main jet

(1) #68 Main jet

(1) #70 Main jet

(1) #72 Main jet

(1) #74 Main jet

(1) #76 Main jet

(1) #78 Main jet

(1) .0265" Intermediate jet

(1) .028" Intermediate jet

(1) .0295" Intermediate jet

(1) .031" Intermediate jet 

Instructions 

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.