|
|
$131.99
Black/36 Widder Lectric-Heat System 2 Lectric-vest
Dennis Kirk Part #: H3525036
Black/36 Widder Lectric-Heat System 2 Lectric-vest: Manufacturer part # S2 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H35-127 features a 9" coiled, 7" straight cord with male connector on one side of the control box; control box is 2.635" L x .875" W x 1.25" D; this unit has an off position with dial temperature settings of 1-7; this unit has a 12V/10 amp maximum rating. Electronic thermostat cord (non-coiled) PART NO. H35-126 is the same as above, except it features a 16" straight cord. Vest can be plugged directly into leg chaps without any additional cords. Vest can be snapped into arm chaps PART NO. H35-150- with the use of wiring harness PART NO. H35-122 and includes two 35" cords; one end has a female connector and the other end has two electrical snap connectors measuring 33" and 35". Available in even sizes 36-52 and 56.. S2
3 on Hand
More Info/Options for Black/36 Widder Lectric-Heat System 2 Lectric-vest
|
|
|
|
$131.99
Black/38 Widder Lectric-Heat System 2 Lectric-vest
Dennis Kirk Part #: H3525038
Black/38 Widder Lectric-Heat System 2 Lectric-vest: Manufacturer part # S2 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H35-127 features a 9" coiled, 7" straight cord with male connector on one side of the control box; control box is 2.635" L x .875" W x 1.25" D; this unit has an off position with dial temperature settings of 1-7; this unit has a 12V/10 amp maximum rating. Electronic thermostat cord (non-coiled) PART NO. H35-126 is the same as above, except it features a 16" straight cord. Vest can be plugged directly into leg chaps without any additional cords. Vest can be snapped into arm chaps PART NO. H35-150- with the use of wiring harness PART NO. H35-122 and includes two 35" cords; one end has a female connector and the other end has two electrical snap connectors measuring 33" and 35". Available in even sizes 36-52 and 56.. S2
3 on Hand
More Info/Options for Black/38 Widder Lectric-Heat System 2 Lectric-vest
|
|
|
|
$131.99
Black/40 Widder Lectric-Heat System 2 Lectric-vest
Dennis Kirk Part #: H3525040
Black/40 Widder Lectric-Heat System 2 Lectric-vest: Manufacturer part # S2 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H35-127 features a 9" coiled, 7" straight cord with male connector on one side of the control box; control box is 2.635" L x .875" W x 1.25" D; this unit has an off position with dial temperature settings of 1-7; this unit has a 12V/10 amp maximum rating. Electronic thermostat cord (non-coiled) PART NO. H35-126 is the same as above, except it features a 16" straight cord. Vest can be plugged directly into leg chaps without any additional cords. Vest can be snapped into arm chaps PART NO. H35-150- with the use of wiring harness PART NO. H35-122 and includes two 35" cords; one end has a female connector and the other end has two electrical snap connectors measuring 33" and 35". Available in even sizes 36-52 and 56.. S2
Expected Soon
More Info/Options for Black/40 Widder Lectric-Heat System 2 Lectric-vest
|
|
|
|
$131.99
Black/42 Widder Lectric-Heat System 2 Lectric-vest
Dennis Kirk Part #: H3525042
Black/42 Widder Lectric-Heat System 2 Lectric-vest: Manufacturer part # S2 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H35-127 features a 9" coiled, 7" straight cord with male connector on one side of the control box; control box is 2.635" L x .875" W x 1.25" D; this unit has an off position with dial temperature settings of 1-7; this unit has a 12V/10 amp maximum rating. Electronic thermostat cord (non-coiled) PART NO. H35-126 is the same as above, except it features a 16" straight cord. Vest can be plugged directly into leg chaps without any additional cords. Vest can be snapped into arm chaps PART NO. H35-150- with the use of wiring harness PART NO. H35-122 and includes two 35" cords; one end has a female connector and the other end has two electrical snap connectors measuring 33" and 35". Available in even sizes 36-52 and 56.. S2
10+ on hand
More Info/Options for Black/42 Widder Lectric-Heat System 2 Lectric-vest
|
|
|
|
$131.99
Black/44 Widder Lectric-Heat System 2 Lectric-vest
Dennis Kirk Part #: H3525044
Black/44 Widder Lectric-Heat System 2 Lectric-vest: Manufacturer part # S2 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H35-127 features a 9" coiled, 7" straight cord with male connector on one side of the control box; control box is 2.635" L x .875" W x 1.25" D; this unit has an off position with dial temperature settings of 1-7; this unit has a 12V/10 amp maximum rating. Electronic thermostat cord (non-coiled) PART NO. H35-126 is the same as above, except it features a 16" straight cord. Vest can be plugged directly into leg chaps without any additional cords. Vest can be snapped into arm chaps PART NO. H35-150- with the use of wiring harness PART NO. H35-122 and includes two 35" cords; one end has a female connector and the other end has two electrical snap connectors measuring 33" and 35". Available in even sizes 36-52 and 56.. S2
2 on Hand
More Info/Options for Black/44 Widder Lectric-Heat System 2 Lectric-vest
|
|
|
|
$131.99
Black/46 Widder Lectric-Heat System 2 Lectric-vest
Dennis Kirk Part #: H3525046
Black/46 Widder Lectric-Heat System 2 Lectric-vest: Manufacturer part # S2 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H35-127 features a 9" coiled, 7" straight cord with male connector on one side of the control box; control box is 2.635" L x .875" W x 1.25" D; this unit has an off position with dial temperature settings of 1-7; this unit has a 12V/10 amp maximum rating. Electronic thermostat cord (non-coiled) PART NO. H35-126 is the same as above, except it features a 16" straight cord. Vest can be plugged directly into leg chaps without any additional cords. Vest can be snapped into arm chaps PART NO. H35-150- with the use of wiring harness PART NO. H35-122 and includes two 35" cords; one end has a female connector and the other end has two electrical snap connectors measuring 33" and 35". Available in even sizes 36-52 and 56.. S2
9 on Hand
More Info/Options for Black/46 Widder Lectric-Heat System 2 Lectric-vest
|
|
|
|
$131.99
Black/48 Widder Lectric-Heat System 2 Lectric-vest
Dennis Kirk Part #: H3525048
Black/48 Widder Lectric-Heat System 2 Lectric-vest: Manufacturer part # S2 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H35-127 features a 9" coiled, 7" straight cord with male connector on one side of the control box; control box is 2.635" L x .875" W x 1.25" D; this unit has an off position with dial temperature settings of 1-7; this unit has a 12V/10 amp maximum rating. Electronic thermostat cord (non-coiled) PART NO. H35-126 is the same as above, except it features a 16" straight cord. Vest can be plugged directly into leg chaps without any additional cords. Vest can be snapped into arm chaps PART NO. H35-150- with the use of wiring harness PART NO. H35-122 and includes two 35" cords; one end has a female connector and the other end has two electrical snap connectors measuring 33" and 35". Available in even sizes 36-52 and 56.. S2
4 on Hand
More Info/Options for Black/48 Widder Lectric-Heat System 2 Lectric-vest
|
|
|
|
$131.99
Black/50 Widder Lectric-Heat System 2 Lectric-vest
Dennis Kirk Part #: H3525050
Black/50 Widder Lectric-Heat System 2 Lectric-vest: Manufacturer part # S2 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H35-127 features a 9" coiled, 7" straight cord with male connector on one side of the control box; control box is 2.635" L x .875" W x 1.25" D; this unit has an off position with dial temperature settings of 1-7; this unit has a 12V/10 amp maximum rating. Electronic thermostat cord (non-coiled) PART NO. H35-126 is the same as above, except it features a 16" straight cord. Vest can be plugged directly into leg chaps without any additional cords. Vest can be snapped into arm chaps PART NO. H35-150- with the use of wiring harness PART NO. H35-122 and includes two 35" cords; one end has a female connector and the other end has two electrical snap connectors measuring 33" and 35". Available in even sizes 36-52 and 56.. S2
1 on Hand
More Info/Options for Black/50 Widder Lectric-Heat System 2 Lectric-vest
|
|
|
|
$131.99
Black/52 Widder Lectric-Heat System 2 Lectric-vest
Dennis Kirk Part #: H3525052
Black/52 Widder Lectric-Heat System 2 Lectric-vest: Manufacturer part # S2 - Features a heated collar with Ultrasuede lining, heated pockets, a dual-slide zipper and accepts Arm Chaps. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation. Includes male plug in front inside bottom and is not visible. Can be used alone but requires one battery cord, either PART NO. H35-101 (19" L) or PART NO. H35-102 (45" L), with a switch cord (on/off only) PART NO. H35-123 or a thermostat cord (contains "off" with temperature control settings of 1-7). Three different thermostat cords are offered. Bi-metal cord PART NO. H35-125 features a non-coiled, 21" wire with male connector and 18" wire with female connector; it has mechanical-type switch and no circuitry; the control unit measures 3 3/4" L x 2 1/4" W x 13/16" D; this unit has an off position with dial temperature control settings of 1-7. Electronic thermostat cord PART NO. H35-127 features a 9" coiled, 7" straight cord with male connector on one side of the control box; control box is 2.635" L x .875" W x 1.25" D; this unit has an off position with dial temperature settings of 1-7; this unit has a 12V/10 amp maximum rating. Electronic thermostat cord (non-coiled) PART NO. H35-126 is the same as above, except it features a 16" straight cord. Vest can be plugged directly into leg chaps without any additional cords. Vest can be snapped into arm chaps PART NO. H35-150- with the use of wiring harness PART NO. H35-122 and includes two 35" cords; one end has a female connector and the other end has two electrical snap connectors measuring 33" and 35". Available in even sizes 36-52 and 56.. S2
2 on Hand
More Info/Options for Black/52 Widder Lectric-Heat System 2 Lectric-vest
|
|
|
|
|
|
|
|
$32.99
H35120 Widder Lectric-Heat Widder Glove Wiring Harness
Dennis Kirk Part #: H35120
H35120 Widder Lectric-Heat Widder Glove Wiring Harness : Manufacturer part # KP - This wiring harness is intended to lay across the back of the neck and down each arm. To aid in dressing, the plug for the glove connection can be held between two fingers as each arm is slid into your jacket sleeve with the T at the left side of your neck. The section with the switch will exit at the bottom of your jacket and plug directly into the Battery cord already installed on the motorcycle. There are no wires hanging from the handlebars.. KP
10 on Hand
More Info/Options for H35120 Widder Lectric-Heat Widder Glove Wiring Harness
|
|
|
|
$14.99
H35121 Widder Lectric-Heat Glove Wiring Harness For Use With Pre-System Vest
Dennis Kirk Part #: H35121
H35121 Widder Lectric-Heat Glove Wiring Harness For Use With Pre-System Vest: Manufacturer part # O - The wires are routed the same as the Wiring Harness For Use Without Vest, however the section that had the switch now has a double-plug assembly. The female connector will plug into the vest, while the remaining male connector will plug into either a Switch Cord or Thermostat Cord which will control both the vest and gloves together. If Lectric-Chaps are also being worn, the same double-plug assembly on the caps will plug on here also. Whatever combination of gear you are wearing, you will still only have one plug disconnect when leaving the bike.. O
1 on Hand
More Info/Options for H35121 Widder Lectric-Heat Glove Wiring Harness For Use With Pre-System Vest
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
