|
|
|
|
|
|
|
|
$464.99
V-Factor Indented Chopper Gas Tank 183360
Dennis Kirk Part #: 183360
V-Factor Indented Chopper Gas Tank 183360: Manufacturer part # 81086 - Raw steel, indented sides. Designed for custom frames with stretched backbones (tunnel measures 22" L x 2 1/2" W). Weld-to-frame brackets recess into the bottom of the tank for a hidden look. 5.4-gal. capacity. Rubber isolated mounting brackets to prevent vibration cracks. Tapped 3/8"-24 at the rear of the tank for crossover line (line not included). Use with 13/16" (22mm) fuel valve. Requires 82-06 (screw-type) vented gas cap, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 81086
2 on Hand
More Info/Options for V-Factor Indented Chopper Gas Tank 183360
|
|
|
|
CLOSEOUT!
Was: $411.99
Now: $308.99
V-Factor One-Piece Gas Tank 182623
Dennis Kirk Part #: 182623
V-Factor One-Piece Gas Tank 182623: Manufacturer part # 81070 - Gas tank with chrome plated bolt in style fluch mount locking cap. The custom tank you've been searching for. Made with 16-gauge steel; 3.8-gal. capacity. Fuel valve mounting location on left side, 6in. from the front of the tank. 1 1/2in. rear inset provides just enough space for most seats. Includes mounting brackets with show-chromed beveled washers and countersunk Allen-head bolts to complement the tank's show-quality style. Delivered with a raw steel finish. Measures 22 1/2in. L x 13in. W at the front; tapers to 7in. W in the rear, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 81070
1 on Hand
More Info/Options for V-Factor One-Piece Gas Tank 182623
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$227.99
V-Factor Sportster Style Bobber Gas Tank 183033
Dennis Kirk Part #: 183033
V-Factor Sportster Style Bobber Gas Tank 183033: Manufacturer part # 81084 - Raw steel. Scalloped sides provide a unique "old school" look. Mounting brackets can be cut and welded to the frame for exact tank placement. Tunnel measures 2 1/4" W, 15" L and is 4" deep at the front. Holds 2.3 gallons. Use with 3/8" NPT fuel valve and 82-06 screw-in gas cap, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 81084
1 on Hand
More Info/Options for V-Factor Sportster Style Bobber Gas Tank 183033
|
|
|
|
$365.99
V-Factor Stretched Chopper Gas Tank 183034
Dennis Kirk Part #: 183034
V-Factor Stretched Chopper Gas Tank 183034: Manufacturer part # 81085 - Raw steel, indented sides. Designed for custom frames with stretched backbones (tunnel measures 22" L x 2 1/2" W). Weld-to-frame brackets recess into the bottom of the tank for a hidden look. 4.1-gal. capacity. Rubber isolated mounting brackets to prevent vibration cracks. Tapped 3/8"-24 at the rear of the tank for crossover line (line not included). Use with 13/16" (22mm) fuel valve. Requires 82-06 (screw-type) vented gas cap, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 81085
2 on Hand
More Info/Options for V-Factor Stretched Chopper Gas Tank 183034
|
|
|
|
$477.99
V-Factor Stretched Chopper Gas Tank for Custom Frame 182814
Dennis Kirk Part #: 182814
V-Factor Stretched Chopper Gas Tank for Custom Frame 182814: Manufacturer part # 81077 - Flush mounted pop-up style gas cap. Designed for custom frames with stretched backbones that will accept the 24" tunnel length (tunnel measures 2 1/2" wide). "Weld to frame" brackets recess in the bottom of the tank for a hidden look. Rubber isolated mounting brackets to prevent vibration cracks. Includes chrome plated pop-up gas cap (replacement cap Part No. 18-2813). Tapped 1/8 27 NPT at rear of thank for gas crossover line (not included). Use with 13/16" (22mm) fuel valve, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 81077
1 on Hand
More Info/Options for V-Factor Stretched Chopper Gas Tank for Custom Frame 182814
|
|
|
|
$542.99
V-Factor Stretched Chopper Gas Tank for Custom Frames 182815
Dennis Kirk Part #: 182815
V-Factor Stretched Chopper Gas Tank for Custom Frames 182815: Manufacturer part # 81079 - Designed for custom frames with stretched backbones that will accept the 25.5" tunnel length (tunnel measures 2 1/2" wide). "Weld to frame" brackets recess in the bottom of the tank for a hidden look. Rubber isolated mounting brackets to prevent vibration cracks. Includes chrome plated pop-up gas cap (replacement gas cap Part No. 18-2813). Tapped 1/8-27 NPT at rear of tank for crossover line (not included). Use with 13/16" (22mm) fuel valve. Holds 5.4 gallons, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 81079
2 on Hand
More Info/Options for V-Factor Stretched Chopper Gas Tank for Custom Frames 182815
|
|
|
|
$477.99
V-Factor Stretched Chopper Gas Tank for Custom Frames 182816
Dennis Kirk Part #: 182816
V-Factor Stretched Chopper Gas Tank for Custom Frames 182816: Manufacturer part # 81080 - Designed for custom frames with stretched backbones that will accept the 25" tunnel length (tunnel measures 2 1/2" wide. "Weld to frame" brackets recess in the bottom of the tank for a hidden look. Rubber isolated mounting brackets to prevent vibration cracks. Includes chrome plated pop-up gas cap (replacement gas cap Part No. 18-2813). Tapped 1/8-27 NPT at rear of tank for gas crossover line (not included). Use with 13/16" (22mm) fuel valve. Holds 5.3 gallons, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 81080
1 on Hand
More Info/Options for V-Factor Stretched Chopper Gas Tank for Custom Frames 182816
|
|
