Sno-Stuff - Suspension & Skis

$56.99 Sno-Stuff 4 in. Carbide Wear Rods for TCS Skis 570-024
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 031422
Sno-Stuff 4 in. Carbide Wear Rods for TCS Skis: Manufacturer part # 570-024 - Features 4" of center control carbide and four 1" wear pads (two on front and rear) for better control on ice and hardpack. Includes eight 3/8" flanged hex nuts. Sold in pair. , , Fits TCS skis only. Will NOT fit X-Calibar skis , , Wear rods for X-Calibar skis use part numbers:, 03-2038 for 4" carbide. 03-2039 for 6" carbide. 03-2040 for 8" carbide. , , Two wear rods are required for each ski, order 2 sets to replace wear rods on both skis. 570-024
More than 10 on hand

More Info/Options for Sno-Stuff 4 in. Carbide Wear Rods for TCS Skis 570-024

Sno-Stuff - Suspension & Skis

$67.99 Sno-Stuff 6 in. Carbide Wear Rods for TCS Skis 570-025
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 031707
Sno-Stuff 6 in. Carbide Wear Rods for TCS Skis: Manufacturer part # 570-025 - Features 4" of center control carbide and four 1" wear pads (two on front and rear) for better control on ice and hardpack. Includes eight 3/8" flanged hex nuts. Sold in pair. , , Fits TCS skis only. Will NOT fit X-Calibar skis , , Wear rods for X-Calibar skis use part numbers:, 03-2038 for 4" carbide. 03-2039 for 6" carbide. 03-2040 for 8" carbide. , , Two wear rods are required for each ski, order 2 sets to replace wear rods on both skis. 570-025
More than 10 on hand

More Info/Options for Sno-Stuff 6 in. Carbide Wear Rods for TCS Skis 570-025

Sno-Stuff - Suspension & Skis

$56.99 Sno-Stuff Easy Steer Carbide Wear Rods 509-200
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10533
Sno-Stuff Easy Steer Carbide Wear Rods: Manufacturer part # 509-200 - Enjoy a casual day of trail riding with easy steering. For use on Polaris Indys 86-00 with steel skis and E-Z Steer system. Intended for use with OEM adapter plate or our PART NO. 10-683 E-Z Steer Plate sold on this page. , NOTE: Must be used with ski skins or some other type of protective plate. Excessive ski wear will result if mounted directly to ski.. 509-200
More than 10 on hand

More Info/Options for Sno-Stuff Easy Steer Carbide Wear Rods 509-200

Sno-Stuff - Suspension & Skis

$60.99 Sno-Stuff Easy Steer Carbide Wear Rods 509-202
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10610
Sno-Stuff Easy Steer Carbide Wear Rods: Manufacturer part # 509-202 -. 509-202
More than 10 on hand

More Info/Options for Sno-Stuff Easy Steer Carbide Wear Rods 509-202

Sno-Stuff - Suspension & Skis

$11.99 Sno-Stuff Easy Steer Plate 509-220
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10683
Sno-Stuff Easy Steer Plate: Manufacturer part # 509-220 - Steel plate offers excellent stability on icy, rutted trails. Fits any Polaris 86-09 (Except RMK/SKS/Switchback/Wide Trax LX/IQ 2003-09, XCR/XC SP/Pro X 120/120 00-09 . Use with EZ-Steer wear rods.. 509-220
More than 10 on hand

More Info/Options for Sno-Stuff Easy Steer Plate 509-220

Sno-Stuff - Suspension & Skis

$42.99 Sno-Stuff Mount Kit for X-Caliber and TCS Skis 570-150
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10769
Sno-Stuff Mount Kit for X-Caliber and TCS Skis: Manufacturer part # 570-150 - Designed for lightweight performance and a straight, safe ride. Excellent for all-around riders on a variety of snow conditions. Made for super-tough UHMW (Ultra-High Molecular Weight) molded plastic. Order one pair of skis in your choice of colors, the custom-fit mount kit for your machine and includes steel wear rods for a complete set.. 570-150
7 on hand

More Info/Options for Sno-Stuff Mount Kit for X-Caliber and TCS Skis 570-150

Sno-Stuff - Suspension & Skis

$42.99 Sno-Stuff Mount Kit for X-Caliber and TCS Skis 570-250
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10770
Sno-Stuff Mount Kit for X-Caliber and TCS Skis: Manufacturer part # 570-250 - Designed for lightweight performance and a straight, safe ride. Excellent for all-around riders on a variety of snow conditions. Eliminates sleds tendency to dart from side to side. Made for super-tough UHMW (Ultra-High Molecular Weight) molded plastic. Dropped center keel with dual wear rod mounts for better steering control at high and low speeds. Order one pair of skis in your choice of colors, the custom-fit mount kit for your machine and includes steel wear rods for a complete set. , , NOTE: Rubber Dampners not included.. 570-250
More than 10 on hand

More Info/Options for Sno-Stuff Mount Kit for X-Caliber and TCS Skis 570-250

Sno-Stuff - Suspension & Skis

$42.99 Sno-Stuff Mount Kit for X-Caliber and TCS Skis 570-450
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10771
Sno-Stuff Mount Kit for X-Caliber and TCS Skis: Manufacturer part # 570-450 - Designed for lightweight performance and a straight, safe ride. Excellent for all-around riders on a variety of snow conditions. Made for super-tough UHMW (Ultra-High Molecular Weight) molded plastic. Order one pair of skis in your choice of colors, the custom-fit mount kit for your machine and includes steel wear rods for a complete set.. 570-450
More than 10 on hand

More Info/Options for Sno-Stuff Mount Kit for X-Caliber and TCS Skis 570-450

Sno-Stuff - Suspension & Skis

$42.99 Sno-Stuff Mount Kit for X-Caliber and TCS Skis 570-451
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 105734
Sno-Stuff Mount Kit for X-Caliber and TCS Skis: Manufacturer part # 570-451 - Designed for lightweight performance and a straight, safe ride. Excellent for all-around riders on a variety of snow conditions. Made for super-tough UHMW (Ultra-High Molecular Weight) molded plastic. Order one pair of skis in your choice of colors, the custom-fit mount kit for your machine and includes steel wear rods for a complete set.. 570-451
5 on hand

More Info/Options for Sno-Stuff Mount Kit for X-Caliber and TCS Skis 570-451

Sno-Stuff - Suspension & Skis

$42.99 Sno-Stuff Mount Kit for X-Caliber and TCS Skis 570-650
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10772
Sno-Stuff Mount Kit for X-Caliber and TCS Skis: Manufacturer part # 570-650 - Designed for lightweight performance and a straight, safe ride. Excellent for all-around riders on a variety of snow conditions. Made for super-tough UHMW (Ultra-High Molecular Weight) molded plastic. Order one pair of skis in your choice of colors, the custom-fit mount kit for your machine and includes steel wear rods for a complete set.. 570-650
6 on hand

More Info/Options for Sno-Stuff Mount Kit for X-Caliber and TCS Skis 570-650

Sno-Stuff - Suspension & Skis

$36.99 Sno-Stuff Shim Kit 100-650
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 25999
Sno-Stuff Shim Kit: Manufacturer part # 100-650 - An easy way to tighten up the front end on your Yamaha snowmobile. Fits any Yamaha snowmobile with TSS suspension(pogo or strut type of suspension). Kit includes spacer washers to replace OE washers, plus six .005 in., .010 in. and .015 in. stainless steel shims to complete the job.. 100-650
More than 10 on hand

More Info/Options for Sno-Stuff Shim Kit 100-650

Sno-Stuff - Suspension & Skis

$56.99 Sno-Stuff Ski Skin 501-601-82
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10395
Sno-Stuff Ski Skin : Manufacturer part # 501-601-82 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation.. 501-601-82
Expected Soon

More Info/Options for Sno-Stuff Ski Skin 501-601-82

Sno-Stuff - Suspension & Skis

$69.99 Sno-Stuff Ski Skins 499-600-82
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10525
Sno-Stuff Ski Skins : Manufacturer part # 499-600-82 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation. Special 1/8" thick ski inserts replace the originals, , NOTE: Ski inserts are designed for both non-reverse and reverse snowmobiles. If you have a reverse model you will have to cut or drill an oblong hole after the rear hole in the skin to allow for the rear of your wearbar. 499-600-82
More than 10 on hand

More Info/Options for Sno-Stuff Ski Skins 499-600-82

Sno-Stuff - Suspension & Skis

$54.99 Sno-Stuff Ski Skins 501-100
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10216
Sno-Stuff Ski Skins : Manufacturer part # 501-100 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation.. 501-100
8 on hand

More Info/Options for Sno-Stuff Ski Skins 501-100

Sno-Stuff - Suspension & Skis

$64.99 Sno-Stuff Ski Skins 501-200-82
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10382
Sno-Stuff Ski Skins : Manufacturer part # 501-200-82 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation.. 501-200-82
5 on hand

More Info/Options for Sno-Stuff Ski Skins 501-200-82

Sno-Stuff - Suspension & Skis

$58.99 Sno-Stuff Ski Skins 501-200-83
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10381
Sno-Stuff Ski Skins : Manufacturer part # 501-200-83 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation.. 501-200-83
3 on hand

More Info/Options for Sno-Stuff Ski Skins 501-200-83

Sno-Stuff - Suspension & Skis

$64.99 Sno-Stuff Ski Skins 501-400-82
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10390
Sno-Stuff Ski Skins : Manufacturer part # 501-400-82 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation, , NOTE: For the best performance order any of the 5" width for Ski-Doo narrow (117mm, about 4 5/8") ski, and 5 7/8" for their wide (139mm, about 5 1/2") ski. Since some models came with the narrow, some with wide and some may have been swapped, be sure to measure the width of your skis before ordering. 501-400-82
1 on hand

More Info/Options for Sno-Stuff Ski Skins 501-400-82

Sno-Stuff - Suspension & Skis

$54.99 Sno-Stuff Ski Skins 501-401
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10220
Sno-Stuff Ski Skins : Manufacturer part # 501-401 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation, , NOTE: For the best performance order any of the 5" width for Ski-Doo narrow (117mm, about 4 5/8") ski, and 5 7/8" for their wide (139mm, about 5 1/2") ski. Since some models came with the narrow, some with wide and some may have been swapped, be sure to measure the width of your skis before ordering. 501-401
6 on hand

More Info/Options for Sno-Stuff Ski Skins 501-401

Sno-Stuff - Suspension & Skis

$65.99 Sno-Stuff Ski Skins 499-600
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 10524
Sno-Stuff Ski Skins: Manufacturer part # 499-600 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation. Special 1/8" thick ski inserts replace the originals, , NOTE: Ski inserts are designed for both non-reverse and reverse snowmobiles. If you have a reverse model you will have to cut or drill an oblong hole after the rear hole in the skin to allow for the rear of your wearbar. 499-600
6 on hand

More Info/Options for Sno-Stuff Ski Skins 499-600

Sno-Stuff - Suspension & Skis