|
|
$436.99
Bologna/Slash-Cut Tip Samson Rolled Thunder Miter-Cut Mufflers
Dennis Kirk Part #: H251426
Bologna/Slash-Cut Tip Samson Rolled Thunder Miter-Cut Mufflers: Manufacturer part # M-142 - These mufflers feature a rolled edge that gives a refined, finished appearance to your dresser. Non-removable baffles are free-flowing for big power and big sound. Mufflers measure 28 in. overall. Made in the U.S.A.. Sold in pairs. INCLUDED ITEMS: Two mufflers. Four 5/16 in.-18 x ¾ in. hex head bolts. Four 5/16 in. lock washers. One instruction sheet. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. M-142
1 on Hand
More Info/Options for Bologna/Slash-Cut Tip Samson Rolled Thunder Miter-Cut Mufflers
|
|
|
|
$436.99
H25115 Samson Silver Bullet 33 in. Fishtail Mufflers
Dennis Kirk Part #: H25115
H25115 Samson Silver Bullet 33 in. Fishtail Mufflers: Manufacturer part # M-119 - One-piece, 3 in. diameter mufflers feature free flowing, low restriction, non-removable baffles, high quality chrome plating and heavy-duty slotted channel brackets. Necessary hardware included. Sold in pairs. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. M-119
Expected Soon
More Info/Options for H25115 Samson Silver Bullet 33 in. Fishtail Mufflers
|
|
|
|
$436.99
H25117 Samson Silver Bullet 30 in. Tapered Mufflers
Dennis Kirk Part #: H25117
H25117 Samson Silver Bullet 30 in. Tapered Mufflers: Manufacturer part # M-121 - One-piece, 3 in. diameter mufflers feature free flowing, low restriction, non-removable baffles, high quality chrome plating and heavy-duty slotted channel brackets. Necessary hardware included. Sold in pairs. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. M-121
1 on Hand
More Info/Options for H25117 Samson Silver Bullet 30 in. Tapered Mufflers
|
|
|
|
$436.99
H25118 Samson Silver Bullet 30 in. Turnout Mufflers
Dennis Kirk Part #: H25118
H25118 Samson Silver Bullet 30 in. Turnout Mufflers: Manufacturer part # M-122 - One-piece, 3 in. diameter mufflers feature free flowing, low restriction, non-removable baffles, high quality chrome plating and heavy-duty slotted channel brackets. Necessary hardware included. Sold in pairs. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. M-122
1 on Hand
More Info/Options for H25118 Samson Silver Bullet 30 in. Turnout Mufflers
|
|
|
|
$436.99
H25119 Samson Silver Bullet 29 in. Slash-Cut Mufflers
Dennis Kirk Part #: H25119
H25119 Samson Silver Bullet 29 in. Slash-Cut Mufflers: Manufacturer part # M-125 - One-piece, 3 in. diameter mufflers feature free flowing, low restriction, non-removable baffles, high quality chrome plating and heavy-duty slotted channel brackets. Necessary hardware included. Sold in pairs. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. M-125
1 on Hand
More Info/Options for H25119 Samson Silver Bullet 29 in. Slash-Cut Mufflers
|
|
|
|
$436.99
H25121 Samson Silver Bullet 29 in. Miter-Cut Mufflers
Dennis Kirk Part #: H25121
H25121 Samson Silver Bullet 29 in. Miter-Cut Mufflers: Manufacturer part # M-127 - One-piece, 3 in. diameter mufflers feature free flowing, low restriction, non removable baffles, high quality chrome plating and heavy-duty slotted channel brackets. Necessary hardware included. Sold in pairs. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. M-127
2 on Hand
More Info/Options for H25121 Samson Silver Bullet 29 in. Miter-Cut Mufflers
|
|
|
|
$303.99
H25122 Samson Silver Bullet 33 in. Straight Pipe Fishtail Mufflers
Dennis Kirk Part #: H25122
H25122 Samson Silver Bullet 33 in. Straight Pipe Fishtail Mufflers: Manufacturer part # M-128 - One-piece, 1-7/8 in. outside diameter mufflers feature free flowing, high quality chrome plating and heavy-duty slotted channel brackets. Necessary hardware included. Sold in pairs. Made in the U.S.A.. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. M-128
2 on Hand
More Info/Options for H25122 Samson Silver Bullet 33 in. Straight Pipe Fishtail Mufflers
|
|
|
|
CLOSEOUT!
Was: $391.99
Now: $293.99
H25123 Samson Silver Bullet 33 in. Fishtail Mufflers
Dennis Kirk Part #: H25123
H25123 Samson Silver Bullet 33 in. Fishtail Mufflers: Manufacturer part # M-101 - One-piece, 3 in. diameter mufflers feature free flowing, low restriction baffles, high quality chrome plating and heavy-duty slotted channel brackets. Necessary hardware included. Sold in pairs. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products in our Chems and Lubes catagory for products that help prevent or remove blueing.. M-101
1 on Hand
More Info/Options for H25123 Samson Silver Bullet 33 in. Fishtail Mufflers
|
|
|
|
CLOSEOUT!
Was: $52.99
Now: $31.79
H251335 Samson Bullet Billet Tips
Dennis Kirk Part #: H251335
H251335 Samson Bullet Billet Tips: Manufacturer part # A-254 - Designed to give your big-inch engine even more performance. Over/under pipe design has an inlet of 1 3/4" dia. at the head, expands to 2" dia. at the tail. S-style systems have rear pipe that crosses in front of transmission end cover to line up with front pipe. Bolts to stock bracket using 3/16" welded-on mounting tabs (unless noted). Softail pipes mount directly to the frame with no bracket required. PART NO. H25-820 requires mounting bracket H25-1318 and passenger pegs must be relocated. Baffles not included, sold separately. Optional billet tips for straight-cut design sold separately. Made in the U.S.A... A-254
2 on Hand
More Info/Options for H251335 Samson Bullet Billet Tips
|
|
|
|
|
|
|
|
$436.99
H251421 Samson Rolled Thunder 28 in. Oval Muffler
Dennis Kirk Part #: H251421
H251421 Samson Rolled Thunder 28 in. Oval Muffler: Manufacturer part # M-136 - These mufflers feature a rolled edge that gives a refined, finished appearance to your dresser. Non-removable baffles are free-flowing for big power and big sound. Mufflers measure 28 in. overall. Made in the U.S.A.. Sold as pairs. INCLUDED ITEMS: Two mufflers. Four 5/16 in.-18 x ¾ in. hex head bolts. Four 5/16 in. lock washers. One instruction sheet. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. M-136
3 on Hand
More Info/Options for H251421 Samson Rolled Thunder 28 in. Oval Muffler
|
|
|
|
$436.99
H251423 Samson Rolled Thunder Slant-Cut Mufflers
Dennis Kirk Part #: H251423
H251423 Samson Rolled Thunder Slant-Cut Mufflers: Manufacturer part # M-138 - These mufflers feature a rolled edge that gives a refined, finished appearance to your dresser. Non-removable baffles are free-flowing for big power and big sound. Mufflers measure 28 in. overall. Made in the U.S.A.. Sold in pairs. INCLUDED ITEMS: Two mufflers. Four 5/16 in.-18 x ¾ in. hex head bolts. Four 5/16 in. lock washers. One instruction sheet. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. M-138
1 on Hand
More Info/Options for H251423 Samson Rolled Thunder Slant-Cut Mufflers
|
|
|
|
$436.99
H251424 Samson Rolled Thunder Slash-Cut Mufflers
Dennis Kirk Part #: H251424
H251424 Samson Rolled Thunder Slash-Cut Mufflers: Manufacturer part # M-140 - These mufflers feature a rolled edge that gives a refined, finished appearance to your dresser. Non-removable baffles are free-flowing for big power and big sound. Mufflers measure 28 in. overall. Made in the U.S.A.. Sold in pairs. INCLUDED ITEMS: One left muffler. One right muffler. Four 5/16 in. nylock nuts. Four 5/16 in. x 1 in. carriage bolts. Four 5/16 in. lock washers. Four 7/16 in. chrome spacers. One instruction sheet. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. M-140
1 on Hand
More Info/Options for H251424 Samson Rolled Thunder Slash-Cut Mufflers
|
|
|
|
$436.99
H251428 Samson Rolled Thunder Straight-Cut Mufflers
Dennis Kirk Part #: H251428
H251428 Samson Rolled Thunder Straight-Cut Mufflers: Manufacturer part # M-144 - These mufflers feature a rolled edge that gives a refined, finished appearance to your dresser. Non-removable baffles are free-flowing for big power and big sound. Mufflers measure 28 in. overall. Made in the U.S.A.. Sold in pairs. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. M-144
3 on Hand
More Info/Options for H251428 Samson Rolled Thunder Straight-Cut Mufflers
|
|
|
|
$436.99
H251431 Samson Silver Bullet 30 in. Turn-Down Mufflers
Dennis Kirk Part #: H251431
H251431 Samson Silver Bullet 30 in. Turn-Down Mufflers: Manufacturer part # M-123 - One-piece, 3 in. diameter mufflers feature free flowing, low restriction, non-removable baffles, high quality chrome plating and heavy-duty slotted channel brackets. Necessary hardware included. Sold in pairs. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. M-123
Expected Soon
More Info/Options for H251431 Samson Silver Bullet 30 in. Turn-Down Mufflers
|
|
|
|
$436.99
H251432 Samson Silver Bullet 29 in. Megaphone Mufflers
Dennis Kirk Part #: H251432
H251432 Samson Silver Bullet 29 in. Megaphone Mufflers: Manufacturer part # M-131 - One-piece, 3 in. diameter mufflers feature free flowing, low restriction, non-removable baffles, high quality chrome plating and heavy-duty slotted channel brackets. Necessary hardware included. Sold in pairs. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. M-131
1 on Hand
More Info/Options for H251432 Samson Silver Bullet 29 in. Megaphone Mufflers
|
|
|
|
|
|
|
|
