|
|
$876.99
H18708 Russ Wernimont Designs Smooth-Top Gas Tank
Dennis Kirk Part #: H18708
H18708 Russ Wernimont Designs Smooth-Top Gas Tank: Manufacturer part # 1914-0009 - The master fender builder finally turns his attention to gas tanks. Beautiful, one-piece, single-cap designs handcrafted from 14- and 16-gauge steel. For Softail Frame the gauges, indicator lights and ignition switch must be relocated. Measures 21 1/4 in. L x 15 1/2 in. W. Tank is designed to use vented gas cap for L96-03 models and 22mm petcock (sold separately), , NOTE: Not for use on fuel-injected models, , NOTE: FXSTD models require the use of a custom seat, , NOTE: This item ships 3-4 days after the order is placed, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 1914-0009
1 on Hand
More Info/Options for H18708 Russ Wernimont Designs Smooth-Top Gas Tank
|
|
|
|
$889.99
H18709 Russ Wernimont Designs Smooth-Top Gas Tank
Dennis Kirk Part #: H18709
H18709 Russ Wernimont Designs Smooth-Top Gas Tank: Manufacturer part # 1914-0010 - The master fender builder finally turns his attention to gas tanks. Beautiful, one-piece, single-cap designs handcrafted from 14- and 16-gauge steel. Universal 5 in. stretch tank fits most custom frames. Measures 25 in. L x 13 1/2 in. W. Tanks is designed to use vented gas cap for L96-03 models and 22mm petcock (sold separately), , NOTE: Not for use on fuel-injected models, , NOTE: FXSTD models require the use of a custom seat, , NOTE: Tank is pictured on the left DK Part no. H18708 is pictured on the right, , NOTE: This item ships 3-4 days after order is placed, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 1914-0010
1 on Hand
More Info/Options for H18709 Russ Wernimont Designs Smooth-Top Gas Tank
|
|
|
|
$1115.99
Russ Wernimont Designs Carb Gas Tank 183040
Dennis Kirk Part #: 183040
Russ Wernimont Designs Carb Gas Tank 183040: Manufacturer part # RWD-800C - 6-gallon one-piece tanks are 1 1/2" wider than stock tanks. Feature a 3 in. stretch and curved bottom for a custom look. Replace the existing dash with the included raw dash panel. Includes a factory sealed powder-coated primer finish. Stock OEM fuel-pump assemblies work with the fuel-injected tanks and use a L96-06 non-vented gas cap. Carb tanks include a filler plate and neck assembly that uses a L96-06 vented gas cap. Tanks fit with RWD ProTour (45-4539) and Profile (45-4538) Seats, sold separately. Made in the U.S.A.. , , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending units, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. RWD-800C
1 on Hand
More Info/Options for Russ Wernimont Designs Carb Gas Tank 183040
|
|
|
|
$1115.99
Russ Wernimont Designs Carb Gas Tank 183332
Dennis Kirk Part #: 183332
Russ Wernimont Designs Carb Gas Tank 183332: Manufacturer part # 07010190 - 6-gallon one-piece tanks are 1 1/2" wider than stock tanks. Feature a 3 in. stretch and curved bottom for a custom look. Replace the existing dash with the included raw dash panel. Includes a factory sealed powder-coated primer finish. Stock OEM fuel-pump assemblies work with the fuel-injected tanks and use a L96-06 non-vented gas cap. Carb tanks include a filler plate and neck assembly that uses a L96-06 vented gas cap. Tanks fit with RWD ProTour (45-4539) and Profile (45-4538) Seats, sold separately. Made in the U.S.A.. , , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending units, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010190
1 on Hand
More Info/Options for Russ Wernimont Designs Carb Gas Tank 183332
|
|
|
|
CLEARANCE!
Was: $35.99
Now: $26.99
Russ Wernimont Designs Frame Mount Kit 182965
Dennis Kirk Part #: 182965
Russ Wernimont Designs Frame Mount Kit 182965: Manufacturer part # 07040001 - Custom tanks for custom builders. One-piece, single-cap design. Designed from 14- and 16-gauge steel. Must use a L96-05 vented gas cap and 22mm petcock. Required mount kits may be used on any custom application. , , NOTE: Not for use on fuel-injected models.. , , NOTE: FXSTD models require the use of a custom seat... 07040001
1 on Hand
More Info/Options for Russ Wernimont Designs Frame Mount Kit 182965
|
|
|
|
$1073.99
Russ Wernimont Designs Fuel-Injected Gas Tank 183039
Dennis Kirk Part #: 183039
Russ Wernimont Designs Fuel-Injected Gas Tank 183039: Manufacturer part # RWD-800 - 6-gallon one-piece tanks are 1 1/2" wider than stock tanks. Feature a 3 in. stretch and curved bottom for a custom look. Replace the existing dash with the included raw dash panel. Includes a factory sealed powder-coated primer finish. Stock OEM fuel-pump assemblies work with the fuel-injected tanks and use a L96-06 non-vented gas cap. Carb tanks include a filler plate and neck assembly that uses a L96-06 vented gas cap. Tanks fit with RWD ProTour (45-4539) and Profile (45-4538) Seats, sold separately. Made in the U.S.A.. , , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending units, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. RWD-800
2 on Hand
More Info/Options for Russ Wernimont Designs Fuel-Injected Gas Tank 183039
|
|
|
|
$1115.99
Russ Wernimont Designs Fuel-Injected Gas Tank 183331
Dennis Kirk Part #: 183331
Russ Wernimont Designs Fuel-Injected Gas Tank 183331: Manufacturer part # 07010189 - 6-gallon one-piece tanks are 1 1/2" wider than stock tanks. Feature a 3 in. stretch and curved bottom for a custom look. Replace the existing dash with the included raw dash panel. Includes a factory sealed powder-coated primer finish. Stock OEM fuel-pump assemblies work with the fuel-injected tanks and use a L96-06 non-vented gas cap. Carb tanks include a filler plate and neck assembly that uses a L96-06 vented gas cap. Tanks fit with RWD ProTour (45-4539) and Profile (45-4538) Seats, sold separately. Made in the U.S.A.. , , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending units, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010189
1 on Hand
More Info/Options for Russ Wernimont Designs Fuel-Injected Gas Tank 183331
|
|
|
|
$1073.99
Russ Wernimont Designs Gas Tanks for Dressers 183703
Dennis Kirk Part #: 183703
Russ Wernimont Designs Gas Tanks for Dressers 183703: 17 1/2" and 20 1/2" widths are now available. A 3? stretch is featured on one-piece tanks. Curved bottom provides a custom look. Raw dash panel replaces the existing dash. Inside of tanks have a factory sealed powder coat primer. OEM fuel-pump assemblies are accepted on 03-07 style fuel-injected tanks and 96-06 style carb tanks include a filler plate/neck assembly; both use L96-08 non-vented gas caps. Approximate 6-gallon capacity. Tanks fit with RWD Profile (45-4538) and ProTour (45-4539) Seats, sold separately. Made in the U.S.A.. , , Dimensions, Length: 22 in., Width: 17 1/2 in., Tunnel Length: 19 in., , Tunnel Width, Front: 3 1/2 in., Rear: 5 in., , Tunnel Depth:, Front: 4 1/2 in., Rear: 4 1/4 in., , Tank Height: 9 in., Fuel Petcock: Left Rear, Petcock Thread Size: 22mm, Gas Cap Type: Threaded, Fuel Pump Tabs: No, , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending unit.. , , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems..
1 on Hand
More Info/Options for Russ Wernimont Designs Gas Tanks for Dressers 183703
|
|
|
|
$1115.99
Russ Wernimont Designs Gas Tanks for Dressers 183704
Dennis Kirk Part #: 183704
Russ Wernimont Designs Gas Tanks for Dressers 183704: 17 1/2" and 20 1/2" widths are now available. A 3? stretch is featured on one-piece tanks. Curved bottom provides a custom look. Raw dash panel replaces the existing dash. Inside of tanks have a factory sealed powder coat primer. OEM fuel-pump assemblies are accepted on 03-07 style fuel-injected tanks and 96-06 style carb tanks include a filler plate/neck assembly; both use L96-08 non-vented gas caps. Approximate 6-gallon capacity. Tanks fit with RWD Profile (45-4538) and ProTour (45-4539) Seats, sold separately. Made in the U.S.A.. , , Dimensions, Length: 22 in., Width: 17 1/2 in., Tunnel Length: 19 in., , Tunnel Width, Front: 3 1/2 in., Rear: 5 in., , Tunnel Depth:, Front: 4 1/2 in., Rear: 4 1/4 in., , Tank Height: 9 in., Fuel Petcock: Left Rear, Petcock Thread Size: 22mm, Gas Cap Type: Threaded, Fuel Pump Tabs: No, , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending unit.. , , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems..
1 on Hand
More Info/Options for Russ Wernimont Designs Gas Tanks for Dressers 183704
|
|
|
|
$1115.99
Russ Wernimont Designs Gas Tanks for Dressers 183705
Dennis Kirk Part #: 183705
Russ Wernimont Designs Gas Tanks for Dressers 183705: 17 1/2" and 20 1/2" widths are now available. A 3? stretch is featured on one-piece tanks. Curved bottom provides a custom look. Raw dash panel replaces the existing dash. Inside of tanks have a factory sealed powder coat primer. OEM fuel-pump assemblies are accepted on 03-07 style fuel-injected tanks and 96-06 style carb tanks include a filler plate/neck assembly; both use L96-08 non-vented gas caps. Approximate 6-gallon capacity. Tanks fit with RWD Profile (45-4538) and ProTour (45-4539) Seats, sold separately. Made in the U.S.A.. , , Dimensions, Length: 22 in., Width: 17 1/2 in., Tunnel Length: 19 in., , Tunnel Width, Front: 3 1/2 in., Rear: 5 in., , Tunnel Depth:, Front: 4 1/2 in., Rear: 4 1/4 in., , Tank Height: 9 in., Fuel Petcock: Left Rear, Petcock Thread Size: 22mm, Gas Cap Type: Threaded, Fuel Pump Tabs: No, , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending unit.. , , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems..
2 on Hand
More Info/Options for Russ Wernimont Designs Gas Tanks for Dressers 183705
|
|
|
|
$1115.99
Russ Wernimont Designs Gas Tanks for Dressers 183706
Dennis Kirk Part #: 183706
Russ Wernimont Designs Gas Tanks for Dressers 183706: 17 1/2" and 20 1/2" widths are now available. A 3? stretch is featured on one-piece tanks. Curved bottom provides a custom look. Raw dash panel replaces the existing dash. Inside of tanks have a factory sealed powder coat primer. OEM fuel-pump assemblies are accepted on 03-07 style fuel-injected tanks and 96-06 style carb tanks include a filler plate/neck assembly; both use L96-08 non-vented gas caps. Approximate 6-gallon capacity. Tanks fit with RWD Profile (45-4538) and ProTour (45-4539) Seats, sold separately. Made in the U.S.A.. , , Dimensions, Length: 22 in., Width: 17 1/2 in., Tunnel Length: 19 in., , Tunnel Width, Front: 3 1/2 in., Rear: 5 in., , Tunnel Depth:, Front: 4 1/2 in., Rear: 4 1/4 in., , Tank Height: 9 in., Fuel Petcock: Left Rear, Petcock Thread Size: 22mm, Gas Cap Type: Threaded, Fuel Pump Tabs: No, , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending unit.. , , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems..
1 on Hand
More Info/Options for Russ Wernimont Designs Gas Tanks for Dressers 183706
|
|
|
|
|
|
CLOSEOUT!
Was: $878.99
Now: $769.99
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182957
Dennis Kirk Part #: 182957
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182957: Manufacturer part # 07010110 - Custom tanks for custom builders. One-piece, single-cap design. Designed from 14- and 16-gauge steel. Short, curved bottom, 23 3/4 in. L. Must use a L96-05 vented gas cap and 22mm petcock (sold separately). Required mount kits may be used on any custom application. , , NOTE: Not for use on fuel-injected models. , , NOTE: FXSTD models require the use of a custom seat, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 07010110
2 on Hand
More Info/Options for Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182957
|
|
|
|
CLEARANCE!
Was: $878.99
Now: $769.99
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182958
Dennis Kirk Part #: 182958
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182958: Manufacturer part # 07010111 - Custom tanks for custom builders. One-piece, single-cap design. Designed from 14- and 16-gauge steel. Short, curved bottom, 23 3/4 in. L. Must use a L96-05 vented gas cap and 22mm petcock (sold separately). Required mount kits may be used on any custom application. , , NOTE: Not for use on fuel-injected models. , , NOTE: FXSTD models require the use of a custom seat, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 07010111
1 on Hand
More Info/Options for Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182958
|
|
|
|
CLEARANCE!
Was: $878.99
Now: $769.99
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182959
Dennis Kirk Part #: 182959
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182959: Manufacturer part # 07010112 - Custom tanks for custom builders. One-piece, single-cap design. Designed from 14- and 16-gauge steel. Short, curved bottom, 23 3/4 in. L. Must use a L96-05 vented gas cap and 22mm petcock (sold separately). Required mount kits may be used on any custom application. , , NOTE: Not for use on fuel-injected models. , , NOTE: FXSTD models require the use of a custom seat, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 07010112
1 on Hand
More Info/Options for Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182959
|
|
|
|
CLEARANCE!
Was: $881.99
Now: $769.99
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182960
Dennis Kirk Part #: 182960
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182960: Manufacturer part # 07010113 - Custom tanks for custom builders. One-piece, single-cap design. Designed from 14- and 16-gauge steel. Short, curved bottom, 23 3/4 in. L. Must use a L96-05 vented gas cap and 22mm petcock (sold separately). Required mount kits may be used on any custom application. , , NOTE: Not for use on fuel-injected models. , , NOTE: FXSTD models require the use of a custom seat, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 07010113
2 on Hand
More Info/Options for Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 182960
|
|
|
|
CLEARANCE!
Was: $995.99
Now: $849.99
Russ Wernimont Designs Smooth-Top Universal Gas Tank 182962
Dennis Kirk Part #: 182962
Russ Wernimont Designs Smooth-Top Universal Gas Tank 182962: Manufacturer part # 07010115 - Custom tanks for custom builders. One-piece, single-cap design. Designed from 14- and 16-gauge steel. Must use a L96-05 vented gas cap and 22mm petcock. Required mount kits may be used on any custom application. , , NOTE: Not for use on fuel-injected models. , , NOTE: FXSTD models require the use of a custom seat, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010115
1 on Hand
More Info/Options for Russ Wernimont Designs Smooth-Top Universal Gas Tank 182962
|
|
|
|
CLEARANCE!
Was: $995.99
Now: $874.99
Russ Wernimont Designs Smooth-Top Universal Gas Tank 182964
Dennis Kirk Part #: 182964
Russ Wernimont Designs Smooth-Top Universal Gas Tank 182964: Manufacturer part # 07010117 - Custom tanks for custom builders. One-piece, single-cap design. Designed from 14- and 16-gauge steel. Must use a L96-05 vented gas cap and 22mm petcock. Required mount kits may be used on any custom application. , , NOTE: Not for use on fuel-injected models. , , NOTE: FXSTD models require the use of a custom seat, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010117
1 on Hand
More Info/Options for Russ Wernimont Designs Smooth-Top Universal Gas Tank 182964
|
|
