Roetin - Suspension & Skis

$82.99 Roetin Extreme X-PRT Carbide Wear Rods XPRT-130
Manufacturer: Roetin
Dennis Kirk Part #: 03842
Roetin Extreme X-PRT Carbide Wear Rods: Manufacturer part # XPRT-130 - Nine inches of 60º carbide on 1/2 in. bar. Four carbide wear pads. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. XPRT-130
2 on hand

More Info/Options for Roetin Extreme X-PRT Carbide Wear Rods XPRT-130

Roetin - Suspension & Skis

$82.99 Roetin Extreme X-PRT Carbide Wear Rods XPRT-134
Manufacturer: Roetin
Dennis Kirk Part #: 031622
Roetin Extreme X-PRT Carbide Wear Rods: Manufacturer part # XPRT-134 - Nine inches of 60º carbide on 1/2 in. bar. Four carbide wear pads. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. XPRT-134
3 on hand

More Info/Options for Roetin Extreme X-PRT Carbide Wear Rods XPRT-134

Roetin - Suspension & Skis

$103.99 Roetin Extreme X-PRT Carbide Wear Rods XPRT-250
Manufacturer: Roetin
Dennis Kirk Part #: 031147
Roetin Extreme X-PRT Carbide Wear Rods: Manufacturer part # XPRT-250 - Nine inches of 60º carbide on 1/2 in. bar. Four carbide wear pads. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing., , NOTE: , Some of the models listed have EZ Steer as original equipment, which is retained with the installation of any X-10 One or X-PR One carbides. If you wish to eliminate the original plate and 2-stud, 14 3/4 in. wear rods you may replace them with an X-10 One or X-PR One 3-stud, 27 1/2 in. type., , NOTE: , Will not work on 2002 models with dual rods on one ski.. XPRT-250
2 on hand

More Info/Options for Roetin Extreme X-PRT Carbide Wear Rods XPRT-250

Roetin - Suspension & Skis

$82.99 Roetin Extreme X-PRT Carbide Wear Rods XPRT-258
Manufacturer: Roetin
Dennis Kirk Part #: 031902
Roetin Extreme X-PRT Carbide Wear Rods: Manufacturer part # XPRT-258 - Nine inches of 60º carbide on 1/2 in. bar. Four carbide wear pads. , , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing., , NOTE: , Wear rods replace the originals exactly on all models except those with EZ Steer either as original equipment or installed later. For those models, these wear rods replace both the plate and the 2-stud, 14 3/4 in. wear rod with a 3-stud, 27 1/2 in. design, , Polaris Touring 600 HO FCI IQ 08/Touring IQ FS/FST 08 only requires one rod per ski. XPRT-258
1 on hand

More Info/Options for Roetin Extreme X-PRT Carbide Wear Rods XPRT-258

Roetin - Suspension & Skis

$103.99 Roetin Extreme X-PRT Carbide Wear Rods XPRT-444
Manufacturer: Roetin
Dennis Kirk Part #: 031276
Roetin Extreme X-PRT Carbide Wear Rods: Manufacturer part # XPRT-444 - Nine inches of 60º carbide on 1/2 in. bar. Four carbide wear pads. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. XPRT-444
1 on hand

More Info/Options for Roetin Extreme X-PRT Carbide Wear Rods XPRT-444

Roetin - Suspension & Skis

$82.99 Roetin Extreme X-PRT Carbide Wear Rods XPRT-644
Manufacturer: Roetin
Dennis Kirk Part #: 032026
Roetin Extreme X-PRT Carbide Wear Rods: Manufacturer part # XPRT-644 - Nine inches of 60º carbide on 1/2 in. bar. Four carbide wear pads. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing., , NOTE: , For Yamaha Vmax 700 XTCP 98 fits model with USI skis. DIMENISIONS: Length x Diameter: 7/16" x 20-1/2". Stud Length x diameter: 2" x 5/16". Number of Studs: 4. , , Stud center mounting distance, from: , , Front to 1st: 3-1/4". 1st to 2nd: 3 9/16". 2nd to 3rd: 7-1/16". 3rd to 4th: 3 1/2". 4th to end: 3- 1/8".. XPRT-644
5 on hand

More Info/Options for Roetin Extreme X-PRT Carbide Wear Rods XPRT-644

Roetin - Suspension & Skis

$103.99 Roetin Extreme X-PRT Carbide Wear Rods XPRT-KT-450
Manufacturer: Roetin
Dennis Kirk Part #: 031613
Roetin Extreme X-PRT Carbide Wear Rods: Manufacturer part # XPRT-KT-450 - Nine inches of 60º carbide on 1/2 in. bar. Four carbide wear pads. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing., , NOTE: , Kits for Ski-Doo Double Runner Precision Skis, contain four runners; two with 4 in. of 90º carbide and two with 6 in. of 90º carbide. For best performance intall longer runner to the outside of ski., , NOTE: , Also Fits Ski-Doo 02-03 models with Precision Skis.. XPRT-KT-450
More than 10 on hand

More Info/Options for Roetin Extreme X-PRT Carbide Wear Rods XPRT-KT-450

Roetin - Suspension & Skis

$25.99 Roetin Hardweld Full-Length Wear Bars p032064
Manufacturer: Roetin
Dennis Kirk Part #: 032061
Roetin Hardweld Full-Length Wear Bars: Manufacturer part # p032064 - 3/8 in. high-grade carbon steel host bars with full-length hard weld keel provide better durability than plain runners. Sold in pairs. , , Dimensions:. , Length x Diameter: 30-1/4" X 3/8". , Stud Length x Diameter: 1 x 5/16 ". , Number of Studs: 1, , Stud Center Mounting Distance From:. , Front to 1st: 15-3/16". 1st to End: 14-15/16".. p032064
3 on hand

More Info/Options for Roetin Hardweld Full-Length Wear Bars p032064

Roetin - Suspension & Skis

$25.99 Roetin Hardweld Full-Length Wear Bars p032064 032062
Manufacturer: Roetin
Dennis Kirk Part #: 032062
Roetin Hardweld Full-Length Wear Bars: Manufacturer part # p032064 - DennisKirk Part # 032062 - 3/8 in. high-grade carbon steel host bars with full-length hard weld keel provide better durability than plain runners. Sold in pairs. , , Dimensions:. , Length x Diameter: 30-3/32" X 3/8". , Stud Length x Diameter: 1 x 5/16 ". , Number of Studs: 1, , Stud Center Mounting Distance From:. , Front to 1st: 13-3/8". 1st to End: 16-23/32".. p032064
4 on hand

More Info/Options for Roetin Hardweld Full-Length Wear Bars p032064 032062

Roetin - Suspension & Skis

$25.99 Roetin Hardweld Full-Length Wear Bars p032064 032063
Manufacturer: Roetin
Dennis Kirk Part #: 032063
Roetin Hardweld Full-Length Wear Bars: Manufacturer part # p032064 - DennisKirk Part # 032063 - 3/8 in. high-grade carbon steel host bars with full-length hard weld keel provide better durability than plain runners. Sold in pairs. , , Dimensions: , Length x Diameter: 23-7/8" x 3/8", Stud Length x Diameter: 1" x 5/16", Number of Studs: 3, Stud Center Mounting Distance From:, Front to 1st: 13-1/2", 1st to 2nd: 5", 2nd to 3rd: 4-1/2", 3rd to End: 7/8". p032064
More than 10 on hand

More Info/Options for Roetin Hardweld Full-Length Wear Bars p032064 032063

Roetin - Suspension & Skis

$25.99 Roetin Hardweld Full-Length Wear Bars p032064 032064
Manufacturer: Roetin
Dennis Kirk Part #: 032064
Roetin Hardweld Full-Length Wear Bars: Manufacturer part # p032064 - DennisKirk Part # 032064 - 3/8 in. high-grade carbon steel host bars with full-length hard weld keel provide better durability than plain runners. Sold in pairs. , NOTE: Replaces OEM Dual Rod with one single rod per ski for the following models, Arctic Cat 4-Stroke Touring 2003, Arctic Cat King Cat 900 2004-2005 (all), Arctic Cat Pantera 600/800 EFI 2004-2005, Arctic Cat T660 2004-2005 (all). , , Dimensions:. , Length X Diameter: 19 3/8" x 3/8". , Stud Length x Diameter: 2" x 3/8". , Number of Studs: 4. , , Stud Center Mounting Distance From:. , Front to 1st: 2 1/4". , 1st to 2nd: 4 1/2". , 2nd to 3rd: 7". , 3rd to 4th: 4 5/8". , 4th to End: 1",. p032064
Expected Soon

More Info/Options for Roetin Hardweld Full-Length Wear Bars p032064 032064

Roetin - Suspension & Skis

$25.99 Roetin Hardweld Full-Length Wear Bars p032064 032065
Manufacturer: Roetin
Dennis Kirk Part #: 032065
Roetin Hardweld Full-Length Wear Bars: Manufacturer part # p032064 - DennisKirk Part # 032065 - 3/8 in. high-grade carbon steel host bars with full-length hard weld keel provide better durability than plain runners. Sold in pairs. , , Dimensions , Length x Diameter: 31-7/8 x 3/8", Stud Length x Diameter: 1" x 5/16", Number of Studs: 1, Stud Center Mounting Distance From: Front to 1st: 16-1/8", 1st to End: 15-3/4". p032064
5 on hand

More Info/Options for Roetin Hardweld Full-Length Wear Bars p032064 032065

Roetin - Suspension & Skis

$25.99 Roetin Hardweld Full-Length Wear Bars p032064 032066
Manufacturer: Roetin
Dennis Kirk Part #: 032066
Roetin Hardweld Full-Length Wear Bars: Manufacturer part # p032064 - DennisKirk Part # 032066 - 3/8 in. high-grade carbon steel host bars with full-length hard weld keel provide better durability than plain runners. Sold in pairs. , , NOTE: Fits SLP Ultra Lite Skis. , , Dimensions:. , Length x Diameter: 27-1/4" X 3/8". , Stud Length x Diameter: 1 x 5/16". , Number of Studs: 3, , Stud Center Mounting Distance From:. , Front to 1st: 12-7/6". , 1st to 2nd: 6-15/16". , 2nd to 3rd: 6-15/16". , 3rd to End: 7/8". p032064
More than 10 on hand

More Info/Options for Roetin Hardweld Full-Length Wear Bars p032064 032066

Roetin - Suspension & Skis

$25.99 Roetin Hardweld Full-Length Wear Bars p032064 032067
Manufacturer: Roetin
Dennis Kirk Part #: 032067
Roetin Hardweld Full-Length Wear Bars: Manufacturer part # p032064 - DennisKirk Part # 032067 - 3/8 in. high-grade carbon steel host bars with full-length hard weld keel provide better durability than plain runners. Sold in pair. , , Dimensions:. , Length x Diameter: 27-1/8" X 3/8". , Stud Length x Diameter: 1 5/8" x 5/16". , Number of Studs: 3, , Stud Center Mounting Distance From:. , Front to 1st: 12-1/4". , 1st to 2nd: 6-7/8". , 2nd to 3rd: 7". , 3rd to End: 15/16".. p032064
9 on hand

More Info/Options for Roetin Hardweld Full-Length Wear Bars p032064 032067

Roetin - Suspension & Skis

$25.99 Roetin Hardweld Full-Length Wear Bars p032064 032068
Manufacturer: Roetin
Dennis Kirk Part #: 032068
Roetin Hardweld Full-Length Wear Bars: Manufacturer part # p032064 - DennisKirk Part # 032068 - 3/8 in. high-grade carbon steel host bars with full-length hard weld keel provide better durability than plain runners. Sold in pairs. , , Dimensions:. , Length X Diameter: 20" x 3/8". , Stud Length x Diameter: 1" x 3/8". , Number of Studs: 3. , , Stud Center Mounting Distance From:. , Front to 1st: 3". , 1st to 2nd: 6 7/8". , 2nd to 3rd: 6 7/8". , 3rd to End: 3 1/4".. p032064
5 on hand

More Info/Options for Roetin Hardweld Full-Length Wear Bars p032064 032068

Roetin - Suspension & Skis

$25.99 Roetin Hardweld Full-Length Wear Bars p032064 032069
Manufacturer: Roetin
Dennis Kirk Part #: 032069
Roetin Hardweld Full-Length Wear Bars: Manufacturer part # p032064 - DennisKirk Part # 032069 - 3/8 in. high-grade carbon steel host bars with full-length hard weld keel provide better durability than plain runners. Sold in pairs. , Dimensions, Length x Diameter: 24 5/8 in. x 3/8 in., Stud Length x Diameter: 1 1/4 in. x 5/16 in., Number of Studs: 2, Stud Center Mounting Distance From:, Front to 1st: 12 5/8 in., 1st to 2nd: 9 5/8 in., 2nd to End: 2 3/8 in.. p032064
4 on hand

More Info/Options for Roetin Hardweld Full-Length Wear Bars p032064 032069

Roetin - Suspension & Skis

$25.99 Roetin Hardweld Full-Length Wear Bars p032064 032070
Manufacturer: Roetin
Dennis Kirk Part #: 032070
Roetin Hardweld Full-Length Wear Bars: Manufacturer part # p032064 - DennisKirk Part # 032070 - 3/8 in. high-grade carbon steel host bars with full-length hard weld keel provide better durability than plain runners. Sold in pairs. , Dimensions, Length x Diameter: 21 in. x 3/8 in., Stud Diameter x Length: 5/16 in. x 2 in., Number of Studs: 4, Stud Center Mounting Distance From:, Front to 1st: 3 3/8 in., 1st to 2nd: 3 7/8 in., 2nd to 3rd: 7 1/2 in., 3rd to 4th: 3 7/8 in., 4th to End: 2 1/4 in.. p032064
2 on hand

More Info/Options for Roetin Hardweld Full-Length Wear Bars p032064 032070

Roetin - Suspension & Skis

$25.99 Roetin Hardweld Full-Length Wear Bars p032064 032071
Manufacturer: Roetin
Dennis Kirk Part #: 032071
Roetin Hardweld Full-Length Wear Bars: Manufacturer part # p032064 - DennisKirk Part # 032071 - 3/8 in. high-grade carbon steel host bars with full-length hard weld keel provide better durability than plain runners. Sold in pairs. , , Dimensions: 22 3/8" X 3/8". , Stud Diameter X Length: 5/16" X 1". , Number of Studs: 3. , Stud Center Mounting Distance From:. , Front to 1st: 2 3/8". , 1st to 2nd: 7 1/8". , 2nd to 3rd: 12 1/4". , 3rd to End: 3/4".. p032064
More than 10 on hand

More Info/Options for Roetin Hardweld Full-Length Wear Bars p032064 032071

Roetin - Suspension & Skis

$25.99 Roetin Hardweld Full-Length Wear Bars p032064 032072
Manufacturer: Roetin
Dennis Kirk Part #: 032072
Roetin Hardweld Full-Length Wear Bars: Manufacturer part # p032064 - DennisKirk Part # 032072 - 3/8 in. high-grade carbon steel host bars with full-length hard weld keel provide better durability than plain runners. Sold in pairs. , , Dimensions:. , Length X Diameter: 22 3/8" x 3/8". , Stud Length x Diameter: 1" x 3/8". , Number of Studs: 4. , , Stud Center Mounting Distance From:. , Front to 1st: 2 1/4". , 1st to 2nd: 7 1/8". , 2nd to 3rd: 8 3/8". , 3rd to 4th: 3 7/8". , 4th to End: 3/4".. p032064
More than 10 on hand

More Info/Options for Roetin Hardweld Full-Length Wear Bars p032064 032072

Roetin - Suspension & Skis

$25.99 Roetin Hardweld Full-Length Wear Bars p032064 032073
Manufacturer: Roetin
Dennis Kirk Part #: 032073
Roetin Hardweld Full-Length Wear Bars: Manufacturer part # p032064 - DennisKirk Part # 032073 - 3/8 in. high-grade carbon steel host bars with full-length hard weld keel provide better durability than plain runners. Sold in pairs. , Dimensions:, Length x Diameter: 22 1/4 in. x 3/8 in., Stud Length x Diameter: 1 in. x 5/16 in., Number of Studs: 4, Stud Center Mounting Distance Frome:, Front to 1st: 6 3/4 in., 1st to 2nd: 3 in., 2nd to 3rd: 6 1/2 in., 3rd to 4th: 3 1/2 in., 4th to End: 2 1/2 in.. p032064
2 on hand

More Info/Options for Roetin Hardweld Full-Length Wear Bars p032064 032073

Roetin - Suspension & Skis

Roetin - Suspension & Skis