Kustomwerks - Fenders

CLOSEOUT!
Was: $144.99
Now: $130.49
Kustomwerks Custom 21 Inch Front Fender 11400
Manufacturer: Kustomwerks
Dennis Kirk Part #: 392509
Kustomwerks Custom 21 Inch Front Fender: Manufacturer part # 11400 - Ready to be trimmed for a true custom look. One piece construction using heavy-duty 14 guage steel. Fits 19 in. or 21 in. wheels on Narrow Glide front ends, can be used on WIde Glide fron end if spacers are used (spacers not included). Undrilled and untrimmed. Phosphate-etched to help prevent corrosion and to give a good base from primer to adhere to. Sold each. Note: Fender must be prefitted before painting.. 11400
1 on hand

More Info/Options for Kustomwerks Custom 21 Inch Front Fender 11400

Kustomwerks - Fenders

CLEARANCE!
Was: $144.99
Now: $130.49
Kustomwerks Custom 21 Inch Front Fender 11401
Manufacturer: Kustomwerks
Dennis Kirk Part #: 392510
Kustomwerks Custom 21 Inch Front Fender: Manufacturer part # 11401 - Ready to be trimmed for a true custom look. One piece construction using heavy-duty 14 guage steel. Fits 19 in. or 21 in. wheels on Narrow Glide front ends, can be used on WIde Glide fron end if spacers are used (spacers not included). Undrilled and untrimmed. Phosphate-etched to help prevent corrosion and to give a good base from primer to adhere to. Sold each. Note: Fender must be prefitted before painting.. 11401
1 on hand

More Info/Options for Kustomwerks Custom 21 Inch Front Fender 11401

Kustomwerks - Fenders

CLEARANCE!
Was: $203.99
Now: $183.59
Kustomwerks Custom Softail Rear Fender 11389
Manufacturer: Kustomwerks
Dennis Kirk Part #: 392500
Kustomwerks Custom Softail Rear Fender: Manufacturer part # 11389 - Heavy duty rear fender for Softail-style frames. Fender is made from 0.080 Inch (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders this one won't split or crack down the middle. The fender has been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Supplied raw, un-trimmed and un-drilled for custom applications, , Note: Must be pre-fitted before painting.. 11389
3 on hand

More Info/Options for Kustomwerks Custom Softail Rear Fender 11389

Kustomwerks - Fenders

CLEARANCE!
Was: $218.99
Now: $197.09
Kustomwerks Custom Softail Rear Fender 11404
Manufacturer: Kustomwerks
Dennis Kirk Part #: 392708
Kustomwerks Custom Softail Rear Fender: Manufacturer part # 11404 - Heavy duty rear fender for Softail-style frames. Made from 0.080 in. 14 guage steel. Formed in one piece for added strength, unlike the two piece welded fenders these won't split or crack down the middle. Phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Raw, un-trimmed and un-drilled for custom applications.. , , Must be pre-fitted before painting.. 11404
1 on hand

More Info/Options for Kustomwerks Custom Softail Rear Fender 11404

Kustomwerks - Fenders

$76.99 Kustomwerks Ducktail Front Fender 11302
Manufacturer: Kustomwerks
Dennis Kirk Part #: 393190
Kustomwerks Ducktail Front Fender: Manufacturer part # 11302 - Superb looking front fender designed for use on FXWG and FXST(C) models, gives greater weather protection than the stock fender. Great to use with the Heritage conversion when the stock 21" wheel is retained. Fender is complete with polished die-cast spaces. 11302
1 on hand

More Info/Options for Kustomwerks Ducktail Front Fender 11302

Kustomwerks - Fenders

$84.99 Kustomwerks Fat Bob Rear Fender for Sportsters 11313
Manufacturer: Kustomwerks
Dennis Kirk Part #: 393191
Kustomwerks Fat Bob Rear Fender for Sportsters: Manufacturer part # 11313 - These raw and unpainted steel fenders will give your Sportster that custom look. Fenders come with weld in tail light brackets.. 11313
2 on hand

More Info/Options for Kustomwerks Fat Bob Rear Fender for Sportsters 11313

Kustomwerks - Fenders

$113.99 Kustomwerks Fat Bob Rear Fender for Sportsters 11314
Manufacturer: Kustomwerks
Dennis Kirk Part #: 393192
Kustomwerks Fat Bob Rear Fender for Sportsters: Manufacturer part # 11314 - These raw and unpainted steel fenders will give your Sportster that custom look. Fenders come with weld in tail light brackets, , Note: Must be pre-fitted before painting.. 11314
1 on hand

More Info/Options for Kustomwerks Fat Bob Rear Fender for Sportsters 11314

Kustomwerks - Fenders

$37.99 Kustomwerks Front Deuce Style Fender w/Bracket 11386
Manufacturer: Kustomwerks
Dennis Kirk Part #: 393414
Kustomwerks Front Deuce Style Fender w/Bracket: Manufacturer part # 11386 - Fits FXSTD models with 18 in., 19 in. and 21 in. wheels from 2001 to present. Replacement fender for FXSTD Softails Deuce, raw steel finish fender with chrome plated bracket. 11386
1 on hand

More Info/Options for Kustomwerks Front Deuce Style Fender w/Bracket 11386

Kustomwerks - Fenders

$88.99 Kustomwerks Heritage Style Rear Fender for FXR Models 11321
Manufacturer: Kustomwerks
Dennis Kirk Part #: 393193
Kustomwerks Heritage Style Rear Fender for FXR Models: Manufacturer part # 11321 - The fender combines the classic styling of the Heritage Softail with the popular rubber mount design of the FXR. It mounts between the stock rear fender struts of FXR models. Has the mounting for the 1973 up style tail light.. 11321
1 on hand

More Info/Options for Kustomwerks Heritage Style Rear Fender for FXR Models 11321

Kustomwerks - Fenders

$19.99 Kustomwerks Narrow Front Fender 11300
Manufacturer: Kustomwerks
Dennis Kirk Part #: 393189
Kustomwerks Narrow Front Fender: Manufacturer part # 11300 - Replaces OEM# 59031-83. Fits FX, FXR and XL models 1973 to present with either 35mm or 39mm fork tubes. Custom narrow front fender with raw finish. For use with 18", 19" or 21" rims. 11300
8 on hand

More Info/Options for Kustomwerks Narrow Front Fender 11300

Kustomwerks - Fenders

$192.99 Kustomwerks Narrow Glide Street Sweeper Front Fender p393110
Manufacturer: Kustomwerks
Dennis Kirk Part #: 393110
Kustomwerks Narrow Glide Street Sweeper Front Fender: Manufacturer part # p393110 - Made from new materials that are lighter and stronger than fiberglass. Not predrilled; allow for an easy custom stance on your bike. Prime and paint with minimal prep work. Made in the U.S.A.. Specs: 4.5 in. W 18/19 in. wheels 100/90 tire Inside width at mounting point: 4 5/8 in. Outside width at mounting point: 4 7/8 in. Straight length: 33 5/8 in.. p393110
Expected Soon

More Info/Options for Kustomwerks Narrow Glide Street Sweeper Front Fender p393110

Kustomwerks - Fenders

$180.99 Kustomwerks Rigid Rear Fender 11397
Manufacturer: Kustomwerks
Dennis Kirk Part #: 392506
Kustomwerks Rigid Rear Fender: Manufacturer part # 11397 - Heavy duty right side drive rear fender for Rigid-style frames. Fender is made from 0.080 Inch (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders this one won't split or crack down the middle. The fender has been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Supplied raw, un-trimmed and un-drilled for custom applications. For use with up to 300mm tires, , NOTE: Must be pre-fitted before painting.. 11397
1 on hand

More Info/Options for Kustomwerks Rigid Rear Fender 11397

Kustomwerks - Fenders

CLEARANCE!
Was: $192.99
Now: $173.69
Kustomwerks Rigid Rear Fender Without Chain Cut 11387
Manufacturer: Kustomwerks
Dennis Kirk Part #: 392499
Kustomwerks Rigid Rear Fender Without Chain Cut: Manufacturer part # 11387 - Heavy duty rear fender for Rigid style frames. Fender is made from 0.080 Inch (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders this one wont split or crack down the middle. The fender has been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Supplied raw, untrimmed and un-drilled for custom applications.. , , Must be pre-fitted before painting.. 11387
1 on hand

More Info/Options for Kustomwerks Rigid Rear Fender Without Chain Cut 11387

Kustomwerks - Fenders

CLEARANCE!
Was: $190.99
Now: $171.89
Kustomwerks Round Top Softail Rear Fender 11376
Manufacturer: Kustomwerks
Dennis Kirk Part #: 392709
Kustomwerks Round Top Softail Rear Fender: Manufacturer part # 11376 - Heavy duty 9 in., 11 in. and 12.50 in. rear fenders for Softail-style frames. Made of 0.080 in. 14 guage steel. Formed in one piece for added strength, unlike the two piece welded fenders these won't split or crack down the middle. Phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Raw and un-drilled for custom applications. Fits Softail-style frames using up to 200mm wide rear tires.. , , Must be pre-fitted before painting.. 11376
2 on hand

More Info/Options for Kustomwerks Round Top Softail Rear Fender 11376

Kustomwerks - Fenders

CLEARANCE!
Was: $195.99
Now: $176.39
Kustomwerks Round Top Softail Rear Fender 11378
Manufacturer: Kustomwerks
Dennis Kirk Part #: 392710
Kustomwerks Round Top Softail Rear Fender: Manufacturer part # 11378 - Heavy duty 9, 11 and 12.50 in. rear fenders for Softail-style frames. Made of 0.080 in. 14 guage steel. Formed in one piece for added strength, unlike the two piece welded fenders these won't split or crack down the middle. Phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Raw and un-drilled for custom applications. Fits Softail-style frames using up to 250mm wide rear tires. Fender is 11.00" wide, , Note: Must be pre-fitted before painting.. 11378
2 on hand

More Info/Options for Kustomwerks Round Top Softail Rear Fender 11378

Kustomwerks - Fenders

CLEARANCE!
Was: $203.99
Now: $183.59
Kustomwerks Round Top Softail Rear Fender 11390
Manufacturer: Kustomwerks
Dennis Kirk Part #: 392501
Kustomwerks Round Top Softail Rear Fender: Manufacturer part # 11390 - Heavy duty rear fender for Softail-style frames. Fender is made from 0.080 Inch (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders this one wont split or crack down the middle. The fender has been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Supplied raw, un-trimmed and un-drilled for custom applications. , , Must be pre-fitted before painting.. 11390
1 on hand

More Info/Options for Kustomwerks Round Top Softail Rear Fender 11390

Kustomwerks - Fenders

CLEARANCE!
Was: $218.99
Now: $197.09
Kustomwerks Round Top Softail Rear Fender 11405
Manufacturer: Kustomwerks
Dennis Kirk Part #: 392711
Kustomwerks Round Top Softail Rear Fender: Manufacturer part # 11405 - Heavy duty 9 in., 11 in. and 12.50 in. rear fenders for Softail-style frames. Made of 0.080 in. 14 guage steel. Formed in one piece for added strength, unlike the two piece welded fenders these won't split or crack down the middle. Phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Raw and un-drilled for custom applications. Fits Softail-style frames using up to 330mm wide rear tires.. , , Must be pre-fitted before painting.. 11405
1 on hand

More Info/Options for Kustomwerks Round Top Softail Rear Fender 11405

Kustomwerks - Fenders

$120.99 Kustomwerks Shorty Front 4.25 in. x 21 in. Fender 11398
Manufacturer: Kustomwerks
Dennis Kirk Part #: 392507
Kustomwerks Shorty Front 4.25 in. x 21 in. Fender: Manufacturer part # 11398 - Fits custom applications, fender is 4.25 in. wide, 6.48 in. wide between the left and right side mounting points and 32.2 in. long. Note: Fender must be prefitted before painting.. 11398
4 on hand

More Info/Options for Kustomwerks Shorty Front 4.25 in. x 21 in. Fender 11398

Kustomwerks - Fenders

CLOSEOUT!
Was: $120.99
Now: $108.89
Kustomwerks Shorty Front 5.50 in. x 21 in. Fender 11403
Manufacturer: Kustomwerks
Dennis Kirk Part #: 392512
Kustomwerks Shorty Front 5.50 in. x 21 in. Fender: Manufacturer part # 11403 - Heavy duty shorty front fender for 21 Inch rims, made from 0.080 Inch (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders this one wont split or crack down the middle. The fender has been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Supplied raw and un-drilled for custom applications. Fits custom applicati