|
|
|
|
|
|
|
|
$287.99
Kuryakyn Corsair Air Cleaner Kit 9863
Manufacturer: Kuryakyn
Dennis Kirk Part #: 183748
Kuryakyn Corsair Air Cleaner Kit: Manufacturer part # 9863 - Free-flowing, aggressively styled high-performance air cleaner. Air cleaner housing is die-cast, then chrome plated for a brilliant shine. High-flow air filter element is supplied by Advanced Flow Engineering (aFe) for maximum performance. Air cleaner extends approximately 6" straight out and 12 1/2" forward of the engine. Provides enough airflow to support engines making more than 100 hp. , , NOTE: Rider legroom may decrease after installation of this air cleaner., , NOTE: Kuryakyn strongly recommends the use of a Wild Things Fuel Injection controller with this kit for optimum performance and driveability, available separately... 9863
1 on hand
More Info/Options for Kuryakyn Corsair Air Cleaner Kit 9863
Kuryakyn - Intake & Fuel
|
|
|
|
$329.99
Kuryakyn Corsair Air Cleaner Kit 9866
Manufacturer: Kuryakyn
Dennis Kirk Part #: 184044
Kuryakyn Corsair Air Cleaner Kit: Manufacturer part # 9866 - Free-flowing, aggressively styled high-performance air cleaner. Air cleaner housing is die-cast, then chrome plated for a brilliant shine. High-flow air filter element is supplied by Advanced Flow Engineering (aFe) for maximum performance. Air cleaner extends approximately 6" straight out and 12 1/2" forward of the engine. Provides enough airflow to support engines making more than 100 hp. , , NOTE: Rider legroom may decrease after installation of this air cleaner., , NOTE: Kuryakyn strongly recommends the use of a Wild Things Fuel Injection controller with this kit for optimum performance and driveability, available separately... 9866
1 on hand
More Info/Options for Kuryakyn Corsair Air Cleaner Kit 9866
Kuryakyn - Intake & Fuel
|
|
|
|
$349.99
Kuryakyn Corsair Air Cleaner Kit 9867
Manufacturer: Kuryakyn
Dennis Kirk Part #: 184045
Kuryakyn Corsair Air Cleaner Kit: Manufacturer part # 9867 - Free-flowing, aggressively styled high-performance air cleaner. Air cleaner housing is die-cast, then chrome plated for a brilliant shine. High-flow air filter element is supplied by Advanced Flow Engineering (aFe) for maximum performance. Air cleaner extends approximately 6" straight out and 12 1/2" forward of the engine. Provides enough airflow to support engines making more than 100 hp. , , NOTE: Rider legroom may decrease after installation of this air cleaner., , NOTE: Kuryakyn strongly recommends the use of a Wild Things Fuel Injection controller with this kit for optimum performance and driveability, available separately... 9867
1 on hand
More Info/Options for Kuryakyn Corsair Air Cleaner Kit 9867
Kuryakyn - Intake & Fuel
|
|
|
|
|
|
$259.99
Kuryakyn Hi-Five Air Cleaner Kit 9470
Manufacturer: Kuryakyn
Dennis Kirk Part #: 183070
Kuryakyn Hi-Five Air Cleaner Kit: Manufacturer part # 9470 - The Hi-Five is the first offering in Inhaler Series of high performance air cleaners. Its five-spoke, tiered and slotted design makes it look and perform spectacularly. Stylized bosses with screws give a sturdy, heavy-duty appearance. Approximately seven inches in diameter and three inches thick, this until packs a ton of performance into a relatively small package. Chrome plated, die-cast construction. Large slotted openings for excellent airflow. An exclusive K&N filter, designed by Kuryakyn, passes smoothed and filtered air through its sides and outer end. Backing plate designed for minimal disturbance of air column as it enters the carburetor. A snap-in ring covers the fasteners; the radius of its inside edge flow bench tested for optimum flow. Convenient threaded ports on the backing plate provide convenient locations to connect crankcase breathers or float bowl vents if needed (both plugs and fittings are included).. 9470
3 on hand
More Info/Options for Kuryakyn Hi-Five Air Cleaner Kit 9470
Kuryakyn - Intake & Fuel
|
|
|
|
$229.99
Kuryakyn Hi-Five Air Cleaner Kit 9471
Manufacturer: Kuryakyn
Dennis Kirk Part #: 183071
Kuryakyn Hi-Five Air Cleaner Kit: Manufacturer part # 9471 - The Hi-Five is the first offering in Inhaler Series of high performance air cleaners. Its five-spoke, tiered and slotted design makes it look and perform spectacularly. Stylized bosses with screws give a sturdy, heavy-duty appearance. Approximately seven inches in diameter and three inches thick, this until packs a ton of performance into a relatively small package. Chrome plated, die-cast construction. Large slotted openings for excellent airflow. An exclusive K&N filter, designed by Kuryakyn, passes smoothed and filtered air through its sides and outer end. Backing plate designed for minimal disturbance of air column as it enters the carburetor. A snap-in ring covers the fasteners; the radius of its inside edge flow bench tested for optimum flow. Convenient threaded ports on the backing plate provide convenient locations to connect crankcase breathers or float bowl vents if needed (both plugs and fittings are included).. 9471
2 on hand
More Info/Options for Kuryakyn Hi-Five Air Cleaner Kit 9471
Kuryakyn - Intake & Fuel
|
|
|
|
$269.99
Kuryakyn Hi-Five Air Cleaner Kit 9472
Manufacturer: Kuryakyn
Dennis Kirk Part #: 183072
Kuryakyn Hi-Five Air Cleaner Kit: Manufacturer part # 9472 - The Hi-Five is the first offering in Inhaler Series of high performance air cleaners. Its five-spoke, tiered and slotted design makes it look and perform spectacularly. Stylized bosses with screws give a sturdy, heavy-duty appearance. Approximately seven inches in diameter and three inches thick, this until packs a ton of performance into a relatively small package. Chrome plated, die-cast construction. Large slotted openings for excellent airflow. An exclusive K&N filter, designed by Kuryakyn, passes smoothed and filtered air through its sides and outer end. Backing plate designed for minimal disturbance of air column as it enters the carburetor. A snap-in ring covers the fasteners; the radius of its inside edge flow bench tested for optimum flow. Convenient threaded ports on the backing plate provide convenient locations to connect crankcase breathers or float bowl vents if needed (both plugs and fittings are included).. 9472
2 on hand
More Info/Options for Kuryakyn Hi-Five Air Cleaner Kit 9472
Kuryakyn - Intake & Fuel
|
|
|
|
$259.99
Kuryakyn Hi-Five Air Cleaner Kit 9473
Manufacturer: Kuryakyn
Dennis Kirk Part #: 183073
Kuryakyn Hi-Five Air Cleaner Kit: Manufacturer part # 9473 - The Hi-Five is the first offering in Inhaler Series of high performance air cleaners. Its five-spoke, tiered and slotted design makes it look and perform spectacularly. Stylized bosses with screws give a sturdy, heavy-duty appearance. Approximately seven inches in diameter and three inches thick, this until packs a ton of performance into a relatively small package. Chrome plated, die-cast construction. Large slotted openings for excellent airflow. An exclusive K&N filter, designed by Kuryakyn, passes smoothed and filtered air through its sides and outer end. Backing plate designed for minimal disturbance of air column as it enters the carburetor. A snap-in ring covers the fasteners; the radius of its inside edge flow bench tested for optimum flow. Convenient threaded ports on the backing plate provide convenient locations to connect crankcase breathers or float bowl vents if needed (both plugs and fittings are included). , NOTE: For single carb models. 9473
1 on hand
More Info/Options for Kuryakyn Hi-Five Air Cleaner Kit 9473
Kuryakyn - Intake & Fuel
|
|
|
|
$269.99
Kuryakyn Hi-Five Air Cleaner Kit 9474
Manufacturer: Kuryakyn
Dennis Kirk Part #: 183074
Kuryakyn Hi-Five Air Cleaner Kit: Manufacturer part # 9474 - The Hi-Five is the first offering in Inhaler Series of high performance air cleaners. Its five-spoke, tiered and slotted design makes it look and perform spectacularly. Stylized bosses with screws give a sturdy, heavy-duty appearance. Approximately seven inches in diameter and three inches thick, this until packs a ton of performance into a relatively small package. Chrome plated, die-cast construction. Large slotted openings for excellent airflow. An exclusive K&N filter, designed by Kuryakyn, passes smoothed and filtered air through its sides and outer end. Backing plate designed for minimal disturbance of air column as it enters the carburetor. A snap-in ring covers the fasteners; the radius of its inside edge flow bench tested for optimum flow. Convenient threaded ports on the backing plate provide convenient locations to connect crankcase breathers or float bowl vents if needed (both plugs and fittings are included).. 9474
3 on hand
More Info/Options for Kuryakyn Hi-Five Air Cleaner Kit 9474
Kuryakyn - Intake & Fuel
|
|
|
|
$259.99
Kuryakyn Hi-Five Air Cleaner Kit 9475
Manufacturer: Kuryakyn
Dennis Kirk Part #: 183075
Kuryakyn Hi-Five Air Cleaner Kit: Manufacturer part # 9475 - The Hi-Five is the first offering in Inhaler Series of high performance air cleaners. Its five-spoke, tiered and slotted design makes it look and perform spectacularly. Stylized bosses with screws give a sturdy, heavy-duty appearance. Approximately seven inches in diameter and three inches thick, this until packs a ton of performance into a relatively small package. Chrome plated, die-cast construction. Large slotted openings for excellent airflow. An exclusive K&N filter, designed by Kuryakyn, passes smoothed and filtered air through its sides and outer end. Backing plate designed for minimal disturbance of air column as it enters the carburetor. A snap-in ring covers the fasteners; the radius of its inside edge flow bench tested for optimum flow. Convenient threaded ports on the backing plate provide convenient locations to connect crankcase breathers or float bowl vents if needed (both plugs and fittings are included).. 9475
5 on hand
More Info/Options for Kuryakyn Hi-Five Air Cleaner Kit 9475
Kuryakyn - Intake & Fuel
|
|
|
|
$329.99
Kuryakyn Hi-Five Air Cleaner Kit 9476
Manufacturer: Kuryakyn
Dennis Kirk Part #: 183076
Kuryakyn Hi-Five Air Cleaner Kit: Manufacturer part # 9476 - The Hi-Five is the first offering in Inhaler Series of high performance air cleaners. Its five-spoke, tiered and slotted design makes it look and perform spectacularly. Stylized bosses with screws give a sturdy, heavy-duty appearance. Approximately seven inches in diameter and three inches thick, this until packs a ton of performance into a relatively small package. Chrome plated, die-cast construction. Large slotted openings for excellent airflow. An exclusive K&N filter, designed by Kuryakyn, passes smoothed and filtered air through its sides and outer end. Backing plate designed for minimal disturbance of air column as it enters the carburetor. A snap-in ring covers the fasteners; the radius of its inside edge flow bench tested for optimum flow. Convenient threaded ports on the backing plate provide convenient locations to connect crankcase breathers or float bowl vents if needed (both plugs and fittings are included).. 9476
Expected Soon
More Info/Options for Kuryakyn Hi-Five Air Cleaner Kit 9476
Kuryakyn - Intake & Fuel
|
|
|
|
|
|
|
|
|
|
|
|
CLEARANCE!
Was: $23.99
Now: $21.59
| |
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS