|
|
$43.99
Kuryakyn Air Cleaner Adapter w/CV Carb 8530
Manufacturer: Kuryakyn
Dennis Kirk Part #: H308530
Kuryakyn Air Cleaner Adapter w/CV Carb: Manufacturer part # 8530 - This application chart will get you the parts required to properly mount a Kuryakyn Hypercharger to most H-D and Buell models equipped with an aftermarket carb. To get what you need, first find your model application on the left-hand side of the chart, then find your carb type in the columns across the top of the chart -- where the application line and carb-type column meet is the PART NO. you need. Be sure to read the footnotes carefully because some models require a breather kit for proper installation and operation. , ,. 8530
1 on hand
More Info/Options for Kuryakyn Air Cleaner Adapter w/CV Carb 8530
Kuryakyn - Fuel & Intake
|
|
|
|
|
|
|
|
|
|
|
|
$49.99
Kuryakyn Bluegrass Breather Kit 9930
Manufacturer: Kuryakyn
Dennis Kirk Part #: 182805
Kuryakyn Bluegrass Breather Kit: Manufacturer part # 9930 - Simple, effective way to keep the oil in the bike. Engines that vent crankcase through the cylinder heads also expel oil through the same passages; venting directly into the air cleaner can result in an oily mess on the side of the bike. The banjo fittings and chrome tubes route the vented gasses upward so gravity can keep any expelled oil droplets in the engine where they belong. Can vent the crankcase to open air by running the vent line up and out of sight beneath the tank, but an optional catch tank p/n 18-2806 is available for those who would rather vent to a closed container. For use with aftermarket air cleaner assembly. Assembled height of breather bolt and fitting is 5/8 in. and hose size is 36 in. x 5/16 in. ID. INCLUDED ITEMS: , (2) Assembly-Banjo Elbow Long, (1) Bluegrass Breather Hardware Kit Including:, (1) 24 in. Long 5/16 in. ID Hose, (6) Aluminum Washer, (4) 1/2 in. Hose Clamp, (1) Y-Line Fitting, (2) 1/2-13 x 1.325 Evo Breather Bolt, (2) 3/8-16 x 1.325 TC Breather Bolt, (1) Installation Instructions. 9930
3 on hand
More Info/Options for Kuryakyn Bluegrass Breather Kit 9930
Kuryakyn - Fuel & Intake
|
|
|
|
$49.99
Kuryakyn Bluegrass Breather Kit 9932
Manufacturer: Kuryakyn
Dennis Kirk Part #: 182807
Kuryakyn Bluegrass Breather Kit: Manufacturer part # 9932 - Simple, effective way to keep the oil in the bike. Engines that vent crankcase through the cylinder heads also expel oil through the same passages; venting directly into the air cleaner can result in an oily mess on the side of the bike. The banjo fittings and chrome tubes route the vented gasses upward so gravity can keep any expelled oil droplets in the engine where they belong. Can vent the crankcase to open air by running the vent line up and out of sight beneath the tank, but an optional catch tank p/n 18-2806 is available for those who would rather vent to a closed container. Fits models listed with Delphi EFI and most carbs (except Mikuni HSR). For use with aftermarket air cleaner assembly.. 9932
3 on hand
More Info/Options for Kuryakyn Bluegrass Breather Kit 9932
Kuryakyn - Fuel & Intake
|
|
|
|
|
|
$31.99
Kuryakyn Chrome Fuel Line Fitting Cover 1521
Manufacturer: Kuryakyn
Dennis Kirk Part #: 183217
Kuryakyn Chrome Fuel Line Fitting Cover : Manufacturer part # 1521 - Cover up the plumbing on your fuel injected bike with this two-piece streamlined beauty. INCLUDED ITEMS: One outer fuel line fitting cover, chrome. One inner fuel line fitting cover, chrome. Two o-ring, 3/32" x 1-1/2", black. Two foam pad, self-adhesive. One alcohol pad. One installation instructions.. 1521
1 on hand
More Info/Options for Kuryakyn Chrome Fuel Line Fitting Cover 1521
Kuryakyn - Fuel & Intake
|
|
|
|
$179.99
Kuryakyn Complete Hi-Five Air Cleaner Assembly only 9483
Manufacturer: Kuryakyn
Dennis Kirk Part #: 182804
Kuryakyn Complete Hi-Five Air Cleaner Assembly only : Manufacturer part # 9483 - The Hi-Five is the first offering in Inhaler Series of high performance air cleaners. Five-spoke, tiered and slotted design looks and performs spectacularly. Stylized bosses with screws give a sturdy, heavy-duty appearance. Approximately seven inches in diameter and three inches thick, this unit packs a ton of performance into a relatively small package. Features chrome plated, die-cast construction. Large slotted openings for excellent airflow. An exclusive K&N filter, designed by Kryakyn, passes smoothed and filtered air through its sides and outer end. Backing plate designed for minimal disturbance of air column as it enters the carburetor. A snap-in ring covers the fasteners; the radius of its inside edge flow bench tested for optimum flow. Convenient threaded ports on the backing plate provide convenient locations to connect crankcase breathers or float bowl vents if needed (both plugs and fittings are included). . Applications called out for CV carb will bolt directly to stock 40mm or Screamin Eagle 44mm CV carbs. These kits can easily be adapted to work on Mikuni HSR42/45/48, S&S Shortys, or other aftermarket carbs. NOTE: This is a complete air cleaner assembly (CV bolt pattern) that can be used with adapters, or brackets to cover applications for which we do not offer a complete kit.. 9483
2 on hand
More Info/Options for Kuryakyn Complete Hi-Five Air Cleaner Assembly only 9483
Kuryakyn - Fuel & Intake
|
|
|
|
$303.99
Kuryakyn Corsair Air Cleaner 9860
Manufacturer: Kuryakyn
Dennis Kirk Part #: 183745
Kuryakyn Corsair Air Cleaner: Manufacturer part # 9860 - Free-flowing, aggressively styled high-performance air cleaner. High-flow air filter element supplied by Advanced Flow Engineering (aFe) for maximum performance is inside a chrome-plated die-cast housing. Provides enough air to support engines making in excess of 100 horsepower. Air cleaner extends approximately 6" straight out and 12 1/2" forward of the engine. PART NO. 18-3747 is a complete Corsair assembly (CV bolt pattern) for use with custom adapters, brackets, etc. for custom installation on models for which a complete kit is not offered. , , NOTE: Installation of this air cleaner may decrease rider legroom... 9860
1 on hand
More Info/Options for Kuryakyn Corsair Air Cleaner 9860
Kuryakyn - Fuel & Intake
|
|
|
|
$303.99
Kuryakyn Corsair Air Cleaner 9861
Manufacturer: Kuryakyn
Dennis Kirk Part #: 183746
Kuryakyn Corsair Air Cleaner: Manufacturer part # 9861 - Free-flowing, aggressively styled high-performance air cleaner. High-flow air filter element supplied by Advanced Flow Engineering (aFe) for maximum performance is inside a chrome-plated die-cast housing. Provides enough air to support engines making in excess of 100 horsepower. Air cleaner extends approximately 6" straight out and 12 1/2" forward of the engine. PART NO. 18-3747 is a complete Corsair assembly (CV bolt pattern) for use with custom adapters, brackets, etc. for custom installation on models for which a complete kit is not offered. , , NOTE: Installation of this air cleaner may decrease rider legroom... 9861
3 on hand
More Info/Options for Kuryakyn Corsair Air Cleaner 9861
Kuryakyn - Fuel & Intake
|
|
|
|
$319.99
Kuryakyn Corsair Air Cleaner 9864
Manufacturer: Kuryakyn
Dennis Kirk Part #: 184039
Kuryakyn Corsair Air Cleaner: Manufacturer part # 9864 - Free-flowing, aggressively styled high-performance air cleaner. High-flow air filter element supplied by Advanced Flow Engineering (aFe) for maximum performance is inside a chrome-plated die-cast housing. Provides enough air to support engines making in excess of 100 horsepower. Air cleaner extends approximately 6" straight out and 12 1/2" forward of the engine. PART NO. 18-3747 is a complete Corsair assembly (CV bolt pattern) for use with custom adapters, brackets, etc. for custom installation on models for which a complete kit is not offered. , , NOTE: NOTE: Installation of this air cleaner may decrease rider legroom... 9864
1 on hand
More Info/Options for Kuryakyn Corsair Air Cleaner 9864
Kuryakyn - Fuel & Intake
|
|
|
|
$274.95
Kuryakyn Corsair Air Cleaner Assembly Only 9862
Manufacturer: Kuryakyn
Dennis Kirk Part #: 183747
Kuryakyn Corsair Air Cleaner Assembly Only: Manufacturer part # 9862 - Free-flowing, aggressively styled high-performance air cleaner. High-flow air filter element supplied by Advanced Flow Engineering (aFe) for maximum performance is inside a chrome-plated die-cast housing. Provides enough air to support engines making in excess of 100 horsepower. Air cleaner extends approximately 6" straight out and 12 1/2" forward of the engine. PART NO. 18-3747 is a complete Corsair assembly (CV bolt pattern) for use with custom adapters, brackets, etc. for custom installation on models for which a complete kit is not offered. , , NOTE: Installation of this air cleaner may decrease rider legroom... 9862
1 on hand
More Info/Options for Kuryakyn Corsair Air Cleaner Assembly Only 9862
Kuryakyn - Fuel & Intake
|
|
|
|
|
|
|
|
|
|
$219.99
Kuryakyn Early Style Hypercharger 8496
Manufacturer: Kuryakyn
Dennis Kirk Part #: H308496
Kuryakyn Early Style Hypercharger : Manufacturer part # 8496 - Vacuum pod automatically opens the butterfiles as your motor demands more air. Handles up to 160 cubic-inch engine. Replaceable K&N filter ensures top performance. Available for Harleys 60-08 with most popular carbs; includes all necessary hardware to mount to the stock carb; if you use an aftermarket carb, see note. 100% made in the USA. Complete kits include all necessary breathers and hardware. , NOTE: , If you use an aftermarket carburetor, you may need a Hypercharger breather kit and/or adapter kit for proper installation. If you run a stock carb, you will not need any additional mounting hardware, unless noted., , NOTE: , Requires H30-700 breather kit or similar, , NOTE: , Fits Big Twin 84-89 with stock carb, S&S series or QwikSilver II. 8496
1 on hand
More Info/Options for Kuryakyn Early Style Hypercharger 8496
Kuryakyn - Fuel & Intake
|
|
|
|
CLEARANCE!
Was: $219.99
Now: $186.99
Kuryakyn Early Style Hypercharger 8353
Manufacturer: Kuryakyn
Dennis Kirk Part #: H308353
Kuryakyn Early Style Hypercharger: Manufacturer part # 8353 - Vacuum pod automatically opens the butterfiles as your motor demands more air. Handles up to 160 cubic-inch engine. Replaceable K&N filter ensures top performance. Available for Harleys 66 and up with most popular carbs; includes all necessary hardware to mount to the stock carb; if you use an aftermarket carb, see note. 100% made in the USA. Complete kits include all necessary breathers and hardware. , NOTE: , If you use an aftermarket carburetor, you may need a Hypercharger breather kit and/or adapter kit for proper installation. If you run a stock carb, you will not need any additional mounting hardware, unless noted., , NOTE: , Mounting kit included for stock carb only. 8353
| |
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS